こんにちは、よろしくお願いします。

私のUbuntu入りのPCは自作でして、マザーボードにH67M-D2-B3（Intel H67 Expressチップセット）を使用しておりますが、lm_sensorsをapt-getでインストールして、sensors-detectを実施するとこうなりました（選択肢は、何も書かれていないところは何も入力せずEnterを押しています）。

$ sudo sensors-detect
# sensors-detect revision 5861 (2010-09-21 17:21:05 +0200)
# System: Gigabyte Technology Co., Ltd. H67M-D2-B3

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
Intel digital thermal sensor...                             Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      Yes
Found unknown chip with ID 0x8728
    (logical device 4 has address 0x290, could be sensors)
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'...                   No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-i801' for device 0000:00:1f.3: Intel Cougar Point (PCH)
Module i2c-i801 loaded successfully.
Module i2c-dev loaded successfully.

Next adapter: i915 gmbus disabled (i2c-0)
Do you want to scan it? (YES/no/selectively):


Next adapter: i915 gmbus ssc (i2c-1)
Do you want to scan it? (YES/no/selectively):

Next adapter: i915 GPIOB (i2c-2)
Do you want to scan it? (YES/no/selectively):

Next adapter: i915 gmbus vga (i2c-3)
Do you want to scan it? (YES/no/selectively):
Next adapter: i915 GPIOA (i2c-4)
Do you want to scan it? (YES/no/selectively):

Next adapter: i915 gmbus panel (i2c-5)
Do you want to scan it? (YES/no/selectively):

Next adapter: i915 GPIOC (i2c-6)
Do you want to scan it? (YES/no/selectively):

Next adapter: i915 gmbus dpc (i2c-7)
Do you want to scan it? (YES/no/selectively):

Next adapter: i915 GPIOD (i2c-8)
Do you want to scan it? (YES/no/selectively):

Next adapter: i915 gmbus dpb (i2c-9)
Do you want to scan it? (YES/no/selectively):

Next adapter: i915 GPIOE (i2c-10)
Do you want to scan it? (YES/no/selectively):

Next adapter: i915 gmbus reserved (i2c-11)
Do you want to scan it? (YES/no/selectively):

Next adapter: i915 gmbus dpd (i2c-12)
Do you want to scan it? (YES/no/selectively):

Next adapter: i915 GPIOF (i2c-13)
Do you want to scan it? (YES/no/selectively):

Next adapter: DPDDC-B (i2c-14)
Do you want to scan it? (YES/no/selectively):

Next adapter: DPDDC-C (i2c-15)
Do you want to scan it? (YES/no/selectively):

Next adapter: SMBus I801 adapter at 0500 (i2c-16)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x50
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No
Probing for `EDID EEPROM'...                                No
Client found at address 0x52
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 No

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `coretemp':
  * Chip `Intel digital thermal sensor' (confidence: 9)

To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
coretemp
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)　YES

Unloading i2c-dev... OK
Unloading i2c-i801... OK
Unloading cpuid... OK

で、$ sudo sensorsをたたいてみると
coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +41.0°C  (high = +80.0°C, crit = +85.0°C) 

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +41.0°C  (high = +80.0°C, crit = +85.0°C) 

CPUの温度しか出ません。まぁCPUの温度が出ただけマシかもしれませんが、システム温度やファン回転数などの情報を得るのはこのマザーボードでは無理なのかと思い、トピックを作らせていただきました。

どうか皆様、お知恵をお貸しください。どうぞよろしくお願い申し上げます。