お知らせ

  • 利用規約を守って投稿してください。また、よくある質問および投稿の手引きも参照してください。
  • メッセージの投稿にはアカウントが必要です。未登録の方は、ユーザ登録ページからアカウントを作成することができます。

ページ: 1

 

#1 2009-05-26 12:00:58

１kcal
新しいメンバ
登録日: 2009-05-19

810の砂嵐画面が直らない

以前、同じ症状でトピックを立てたのですが、その時は自己解決で済んだと思っていましたが
どうも調子が悪く、お知恵を拝借出来ましたら幸です。

ubuntu810で症状として下記のトピックと同様に砂嵐になります。

■ubuntu804
https://forums.ubuntulinux.jp/viewtopic.php?id=2604

810にはdispayconfig-gtkが無いので、804用物を810へインストールして設定した方が良さそうでしょうか？
ただ、nVidia X Server Settingsで解像度は正常に変更出来ることから、出来ることでしたら余分な物は不具合要因
になりそうなので避けたいのですが・・・

状況としては、1024×768まで解像度を下げても変わらずです。システム〜デスクトップの設定側で設定しても同様に変わらず

また、OS起動後は文字入力欄やボタン部分等に砂嵐が表示されているのですが、都度nVidia X Server Settings
を起動するとそちらで設定したX Server Color Correctionが反映されて砂嵐は消えます。（画面がボケている感じになりますが）
解像度は1400×1050/Autoから1280×1024/Autoにxorg.confを編集し設定してあるので
こちらはリブートしても反映されています。

スペックは以下の通りです。
TOSHIBA DynabookSS LX/290DK

・ハードウェアドライバ：nVidia accelated graphics driver version180(173、177もテストを行いましたが変わらず)

・グラフィックドライバ：GeForce Go 6600 TE/6200 TE
　VBIOSバージョン：05.43.02.49.01
　メモリー：64MB
　BUSタイプ：PCI Express 16X
　BUS ID: 1:0:0
　IRQ：16
　
・ディスプレイモデル：TOSHIBA Internal Panel (DFP-0)

・Xorg.0.log.oldなのですが、新たにXorg.0.logが生成されており新しい方を掲載します。
　ログの見方は画面解像度がデフォルトと変更後の内容が設定されていた程度しか分かりませんが・・・

コード:

X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux 0rz 2.6.27-14-generic #1 SMP Wed Apr 15 18:59:16 UTC 2009 i686
Build Date: 09 March 2009  10:48:54AM
xorg-server 2:1.5.2-2ubuntu3.1 ([email protected]) 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue May 26 09:53:26 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d9a40
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@1:0:0) nVidia Corporation NV43 [Geforce Go 6600TE/6200TE] rev 162, Mem @ 0xcf000000/0, 0xb0000000/0, 0xce000000/0
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"

(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.2, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
(II) NVIDIA GLX Module  180.11  Wed Nov 26 11:23:16 PST 2008
(II) Loading extension GLX
(II) LoadModule: "record"

(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"

(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
(II) LoadModule: "kbd"

(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.99.905, module version = 1.3.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "mouse"

(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.99.905, module version = 1.3.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
(II) NVIDIA dlloader X Driver  180.11  Wed Nov 26 11:00:06 PST 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"

(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "0"
(**) NVIDIA(0): Option "MetaModes" "1280x1024 +0+0"
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0):     enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce Go 6600 TE/6200 TE (NV43) at PCI:1:0:0
(II) NVIDIA(0):     (GPU-0)
(--) NVIDIA(0): Memory: 65536 kBytes
(--) NVIDIA(0): VideoBIOS: 05.43.02.49.01
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce Go 6600 TE/6200 TE at
(--) NVIDIA(0):     PCI:1:0:0:
(--) NVIDIA(0):     TOSHIBA Internal Panel (DFP-0)
(--) NVIDIA(0): TOSHIBA Internal Panel (DFP-0): 310.0 MHz maximum pixel clock
(--) NVIDIA(0): TOSHIBA Internal Panel (DFP-0): Internal Dual Link LVDS
(II) NVIDIA(0): Assigned Display Device: DFP-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0):     "1280x1024+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): DPI set to (112, 118); computed from "UseEdidDpi" X config
(--) NVIDIA(0):     option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Setting mode "1280x1024+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/psaux"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/psaux"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"

(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 2.0.99
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
(II) LoadModule: "synaptics"

(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 0.15.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.15.2
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(**) Option "Device" "/dev/input/event9"
(--) AlpsPS/2 ALPS GlidePoint touchpad found
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(--) AlpsPS/2 ALPS GlidePoint touchpad found
(II) config/hal: Adding input device PS/2 Mouse
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event8"
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "jp106"
(**) AT Translated Set 2 keyboard: xkb_model: "jp106"
(**) Option "xkb_layout" "jp,jp"
(**) AT Translated Set 2 keyboard: xkb_layout: "jp,jp"
(**) Option "xkb_variant" "106,"
(**) AT Translated Set 2 keyboard: xkb_variant: "106,"
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(**) AT Translated Set 2 keyboard: xkb_options: "grp:alt_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device PIXART USB OPTICAL MOUSE
(**) PIXART USB OPTICAL MOUSE: always reports core events
(**) PIXART USB OPTICAL MOUSE: Device: "/dev/input/event6"
(II) PIXART USB OPTICAL MOUSE: Found x and y relative axes
(II) PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
(II) PIXART USB OPTICAL MOUSE: Configuring as mouse
(II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" (type: MOUSE)
(**) PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
(**) PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "jp106"
(**) Video Bus: xkb_model: "jp106"
(**) Option "xkb_layout" "jp,jp"
(**) Video Bus: xkb_layout: "jp,jp"
(**) Option "xkb_variant" "106,"
(**) Video Bus: xkb_variant: "106,"
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(**) Video Bus: xkb_options: "grp:alt_shift_toggle,grp_led:scroll"
AUDIT: Tue May 26 09:53:41 2009: 5164 X: client 5 rejected from local host ( uid=0 gid=0 pid=5431 )
AUDIT: Tue May 26 09:53:46 2009: 5164 X: client 3 rejected from local host ( uid=1000 gid=1000 pid=5442 )
AUDIT: Tue May 26 09:53:46 2009: 5164 X: client 3 rejected from local host ( uid=1000 gid=1000 pid=5443 )
AUDIT: Tue May 26 09:53:46 2009: 5164 X: client 3 rejected from local host ( uid=1000 gid=1000 pid=5444 )
(II) NVIDIA(0): Setting mode "1280x960"
(II) NVIDIA(0): Setting mode "1280x1024+0+0"
(II) NVIDIA(0): Setting mode "1280x960"
(II) NVIDIA(0): Setting mode "1280x1024+0+0"

・xorg.confの設定内容(Screen0値が設定値ではなく、初期値のようにも言えるのですが…)

コード:

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    # HorizSync source: edid, VertRefresh source: edid
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "TOSHIBA Internal Panel"
    HorizSync       30.0 - 75.0
    VertRefresh     60.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce Go 6600 TE/6200 TE"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "metamodes" "1280x1024 +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

オフライン

 

#2 2009-05-28 08:45:29

funatogawa
メンバ
From: 関東
登録日: 2009-02-01

Re: 810の砂嵐画面が直らない

こんにちは

810にはdispayconfig-gtkが無いので、804用物を810へインストールして設定した方が良さそうでしょうか？
ただ、nVidia X Server Settingsで解像度は正常に変更出来ることから、出来ることでしたら余分な物は不具合要因になりそうなので避けたいのですが・・・

結論からいうと止めた方が賢明です。
Xsystemの仕様変更で?新しいX.sysのツールを作っているようですが，間に合わなかったらしく、本家のフォーラムでも解決法がアナウンスされていないようです。（推測文で申し訳ありません)
http://ubuntuforums.org/showthread.php?t=996478

オフライン

 

#3 2009-05-28 22:35:08

１kcal
新しいメンバ
登録日: 2009-05-19

Re: 810の砂嵐画面が直らない

funatogawaさん最新情報ありがとうございました。
ダメ元のつもりで、guidance-backends080を入れてからdisplayconfig-gtk0310を入れてみました。
結果は変わらずの意味無しでした。

Xorg.confを設定保存してもX Server Color Correctionの情報は保存されず都度X Server Settingsを起動しなければ認識されず
OSリブートすると情報が一旦失われてOS起動後に再度実行しなければ砂嵐は直らない状況下です。

オフライン

 

#4 2009-05-29 00:53:41

petitbootang
メンバ
From: 東京都
登録日: 2009-02-12

Re: 810の砂嵐画面が直らない

Section "Device" のところに、
Option           "NoAccel"
を加えてみても駄目でしょうか？

オフライン

 

#5 2009-05-30 00:40:32

１kcal
新しいメンバ
登録日: 2009-05-19

Re: 810の砂嵐画面が直らない

petitbootangさん情報ありがとうございました。

xorg.confのSection "Device"へ上記のOption値を設定してみましたが、変わらずでした。

今のところ都度X Server Color Correctionで認識させなければ砂嵐は直らない状況なのですが、
このX Server Color Correctionの情報をOS起動時に読み込めるようなシェルまたは、設定情報ファイルを直接弄ってみようかと
ネットで設定ファイルのありかを検索しているのでが、全くわかりません…

BIOS画面まで砂嵐なのでハードの不具合かと試しに別のディストリビューションとWindowsの両方をマシンに入れてみた結果、
画面は正常に戻りました　うーん…

オフライン

 

#6 2009-06-14 01:23:22

１kcal
新しいメンバ
登録日: 2009-05-19

Re: 810の砂嵐画面が直らない

ご無沙汰しております。

色々とネットで情報を探した結果
TOSHIBAのノートPC製品で多発しているディスプレイの欠陥(東芝は欠陥と認めず)だということがわかりました。

ご回答の皆様色々と貴重な情報ありがとうございました。
この機でXorg.confなどディスプレイに関する多くの知識を得ることが出来ました。

オフライン

 

 

ページ: 1

Board footer

Powered by FluxBB