お知らせ

  • 利用規約を守って投稿してください。また、よくある質問および投稿の手引きも参照してください。
  • メッセージの投稿にはアカウントが必要です。未登録の方は、ユーザ登録ページからアカウントを作成することができます。

#1 2007-08-18 11:53:11

youre
メンバ
登録日: 2006-11-07

CFアダプタ(PCMCIA)認識しない(Ubuntu6.10)

PCMCIAへ接続するタイプのCompactFlashCard Adaptorが認識されない様子です.
手元にある2種類のアダプタが共に認識されていない様子なので,パソコン側の
障害以外では,カーネル側でディセーブルされているのかも知れません.

CFアダプタ
メーカー:アドテック(ADTEC)
型番:AD-CFADP
メーカー:パナソニック(Panasonic)
型番:BN-CFADPP3

CFカード
メーカー:アドテック(ADTEC)
型番:AD-CFG (32MB 3.3/5V DUAL)
メーカー:サンディスク(SanDisk)
型番:SDCFB (16MB)

どれも古くて枯れた製品ですので, 製品側の問題は少ないと思います.
ビギナーサポートで触れているCF型SDカードアダプタの件にも関係あるかも知れません.

dmesgを見ても何も検出されていませんので,先に何か設定が必要と思われます.
設定方法を教えて頂ければ試して見たいと思います.
よろしくお願い致します.

使用パソコンの情報
Ubuntu 6.10 + FMV-BIBLO MF7/700
chipset:Intel 440MX,RAM:256MB,HDD:20GB
PCMCIAコントローラー
O2 Micro Inc.
OZ6933/711E1 CardBus/SmartCardBus

オフライン

 

#2 2007-08-19 22:56:44

hito
管理者
登録日: 2007-03-18

Re: CFアダプタ(PCMCIA)認識しない(Ubuntu6.10)

とりあえず sudo lspci -v の出力をください。

以前動いていたかどうかを知りたいのですが、この環境は↓の時と同じものでしょうか?
http://forum.ubuntulinux.jp/viewtopic.php?id=226

オフライン

 

#3 2007-08-20 10:21:23

youre
メンバ
登録日: 2006-11-07

Re: CFアダプタ(PCMCIA)認識しない(Ubuntu6.10)

ご指摘通り,先のスレッドで使用しているものと同じパソコンです.

先のスレッド,
"メモリーカード リーダライターの動作(kernel原因?)"
USBメモリーカードリーダライター (アドテック, AD-MCR/W)
の件ではお世話になりました.対応ありがとうございました〜

1.パソコンの詳細

品名:FMV-BIBLO MF7/700
型番:FMVMF7703

"MF series 仕様一覧"
http://www.fmworld.net/product/hard/bi0105/biblo_mf.html#spec

"搭載チップ情報 > 2001年夏 > FMV-BIBLO MF7/700, MF7/600W, MF7/60R"
http://www.fmworld.net/biz/fmv/annc/linux/chip_info_noteall.html


2.CFアダプタを装着するまえの状態.

# lspci -v

00:00.0 Host bridge: Intel Corporation 82440MX Host Bridge (rev 01)
        Subsystem: Fujitsu Limited. Unknown device 107f
        Flags: bus master, medium devsel, latency 64

00:00.1 Multimedia audio controller: Intel Corporation 82440MX AC'97 Audio Controller
        Subsystem: Fujitsu Limited. Unknown device 10d0
        Flags: bus master, fast devsel, latency 0, IRQ 9
        I/O ports at 1000 [size=256]
        I/O ports at 1cc0 [size=64]

00:00.2 Modem: Intel Corporation 82440MX AC'97 Modem Controller (prog-if 00 [Generic])
        Subsystem: Fujitsu Limited. Unknown device 10d1
        Flags: fast devsel, IRQ 9
        I/O ports at 1400 [size=256]
        I/O ports at 1c00 [size=128]

00:07.0 Bridge: Intel Corporation 82440MX ISA Bridge (rev 01)
        Flags: bus master, medium devsel, latency 0

00:07.1 IDE interface: Intel Corporation 82440MX EIDE Controller (prog-if 80 [Master])
        Flags: bus master, medium devsel, latency 64
        I/O ports at 1c90 [size=16]

00:07.2 USB Controller: Intel Corporation 82440MX USB Universal Host Controller (prog-if 00 [UHCI])
        Flags: bus master, medium devsel, latency 64, IRQ 15
        I/O ports at 1ca0 [size=32]

00:07.3 Bridge: Intel Corporation 82440MX Power Management Controller
        Flags: medium devsel

00:11.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) (prog-if 10 [OHCI])
        Subsystem: Fujitsu Limited. Unknown device 10d9
        Flags: bus master, medium devsel, latency 64, IRQ 9
        Memory at fc005000 (32-bit, non-prefetchable) [size=2K]
        Memory at fc000000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 1

00:12.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Fujitsu Limited. Unknown device 111c
        Flags: bus master, medium devsel, latency 64, IRQ 9
        I/O ports at 1800 [size=256]
        Memory at fc005800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2

00:13.0 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 01)
        Subsystem: Fujitsu Limited. Unknown device 10e7
        Flags: bus master, stepping, slow devsel, latency 168, IRQ 9
        Memory at 28020000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
        Memory window 0: 20000000-21fff000 (prefetchable)
        Memory window 1: 22000000-23fff000
        I/O window 0: 00002400-000024ff
        I/O window 1: 00002800-000028ff
        16-bit legacy interface ports at 0001

00:13.1 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 01)
        Subsystem: Fujitsu Limited. Unknown device 10e7
        Flags: bus master, stepping, slow devsel, latency 168, IRQ 9
        Memory at 28021000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=00, secondary=05, subordinate=08, sec-latency=176
        Memory window 0: 24000000-25fff000 (prefetchable)
        Memory window 1: 26000000-27fff000
        I/O window 0: 00002c00-00002cff
        I/O window 1: 00003000-000030ff
        16-bit legacy interface ports at 0001

00:14.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M (rev 64) (prog-if 00 [VGA])
        Subsystem: Fujitsu Limited. Unknown device 1103
        Flags: bus master, stepping, medium devsel, latency 66, IRQ 9
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        I/O ports at 2000 [size=256]
        Memory at fc004000 (32-bit, non-prefetchable) [size=4K]
        [virtual] Expansion ROM at 28000000 [disabled] [size=128K]
        Capabilities: [5c] Power Management version 1


前回(USB-MR/W)で取る様に言われてたので,一応.

# ps ax | grep hald

4401 ?        Ss     0:03 /usr/sbin/hald
4402 ?        S      0:00 hald-runner
4408 ?        S      0:00 /usr/lib/hal/hald-addon-acpi
4447 ?        S      0:00 /usr/lib/hal/hald-addon-keyboard
4468 ?        S      0:00 /usr/lib/hal/hald-addon-storage
6608 pts/0    R+     0:00 grep hald

#

"lshal" します.

# lshal > lshal.txt

Dumping 65 device(s) from the Global Device List:
-------------------------------------------------
(長いので省略します.)
("storage.media_check_enabled = true  (bool)" の行が見付かるのは,)

udi = '/org/freedesktop/Hal/devices/storage_model_UJDA710'
  info.addons = {'hald-addon-storage'} (string list)
  storage.policy.desired_mount_point = 'cdrecorder'  (string)
  storage.policy.mount_filesystem = 'auto'  (string)
  storage.policy.should_mount = true  (bool)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_model_UJDA710'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_model_UJDA710'  (string)
  storage.cdrom.write_speed = 1411  (0x583)  (int)
  storage.cdrom.read_speed = 4234  (0x108a)  (int)
  storage.cdrom.support_media_changed = true  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.dvdplusrdl = false  (bool)
  storage.cdrom.dvdplusrw = false  (bool)
  storage.cdrom.dvdplusr = false  (bool)
  storage.cdrom.dvdram = false  (bool)
  storage.cdrom.dvdrw = false  (bool)
  storage.cdrom.dvdr = false  (bool)
  storage.cdrom.dvd = true  (bool)
  storage.cdrom.cdrw = true  (bool)
  storage.cdrom.cdr = true  (bool)
  storage.requires_eject = true  (bool)
  storage.hotpluggable = false  (bool)
  info.capabilities = {'storage', 'block', 'storage.cdrom'} (string list)
  info.category = 'storage'  (string)
  info.product = 'UJDA710'  (string)
  storage.removable = true  (bool)
  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_7199_ide_0_1'  (string)
  storage.firmware_version = '1.05'  (string)
  storage.vendor = ''  (string)
  storage.model = 'UJDA710'  (string)
  storage.drive_type = 'cdrom'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.media_check_enabled = true  (bool)  (←ここ)
  storage.no_partitions_hint = true  (bool)
  storage.bus = 'ide'  (string)
  block.is_volume = false  (bool)
  block.minor = 64  (0x40)  (int)
  block.major = 3  (0x3)  (int)
  block.device = '/dev/hdb'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_7199_ide_0_1'  (string)
  linux.sysfs_path_device = '/sys/block/hdb'  (string)
  linux.sysfs_path = '/sys/block/hdb'  (string)

(の項目だけです.(松下製CD-R/RW/DVD-ROM光ドライブ))

("storage.media_check_enabled = false  (bool)"は,)

udi = '/org/freedesktop/Hal/devices/storage_serial_CSH204DMJ7U5XB'
  storage.policy.should_mount = false  (bool)
  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_CSH204DMJ7U5XB'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_CSH204DMJ7U5XB'  (string)
  storage.requires_eject = false  (bool)
  storage.hotpluggable = false  (bool)
  info.capabilities = {'storage', 'block'} (string list)
  info.category = 'storage'  (string)
  info.product = 'IC25N020ATCS04-0'  (string)
  storage.removable = false  (bool)
  storage.physical_device = '/org/freedesktop/Hal/devices/pci_8086_7199_ide_0_0'  (string)
  storage.firmware_version = 'CA2OA74A'  (string)
  storage.serial = 'CSH204DMJ7U5XB'  (string)
  storage.vendor = ''  (string)
  storage.model = 'IC25N020ATCS04-0'  (string)
  storage.drive_type = 'disk'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.media_check_enabled = false  (bool)  (←ここ)
  storage.no_partitions_hint = false  (bool)
  storage.bus = 'ide'  (string)
  block.is_volume = false  (bool)
  block.minor = 0  (0x0)  (int)
  block.major = 3  (0x3)  (int)
  block.device = '/dev/hda'  (string)
  linux.hotplug_type = 3  (0x3)  (int)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_7199_ide_0_0'  (string)
  linux.sysfs_path_device = '/sys/block/hda'  (string)
  linux.sysfs_path = '/sys/block/hda'  (string)

(の項目だけ.(HGST HDD 20GB))

CFを期待してメディア挿入を待っている様子は無い様です
CFアダプタを差し込んだ後にも取ってみましたが変化が見られません.


パソコンやアダプタ,CF等のハード側の故障も危惧されるので,同じパソコンで
Windows XP Professional SP2 で,起動してCFアダプタが認識されるか試してみました.
(Windows XPインストール済みのハードディスクに入れ換えてます.)

パソコン起動後に, ADTECのCF(AD-CFG 32MB)を, ADTECアダプタ(AD-CFADP)に差して
つないだところ,認識されて,CF内部のホルダやデータが見えましたので,ハード的な問題は
無い様です.

そのほかの組み合わせも試しています.
ADTEC(AD-CFADP) + ADTEC(AD-CFG 32MB) CF の組み合わせ
Panasonic(BN-CFADPP3) + SunDisk(SDCFB 16MB) CF の組み合わせ
Fujitsu(FMV-J502) + GREENHOUSE(microSD 128MB) SDカードの組み合わせ
Fujitsu(FMV-J502) + SONY(MSA-16A 16MB) MEMORY STICKの組み合わせ
以上も,Windows XPでは問題ありませんでした.

最後の編集者: youre (2007-08-22 14:17:08)

オフライン

 

#4 2007-08-22 15:24:13

youre
メンバ
登録日: 2006-11-07

Re: CFアダプタ(PCMCIA)認識しない(Ubuntu6.10)

Fedora Core 5 で動作しているデスクトップ(FMV-DeskPower CE7/85L)
に入れてみたところ,すべて認識されました.その際の lshal のdiff差分を取ってみました.

## Panasonic(BN-CFADPP3) + SunDisk(SDCFB 16MB) CF の組み合わせ

2c2
< Dumping 78 device(s) from the Global Device List:
---
> Dumping 82 device(s) from the Global Device List:
1304a1305,1403
> udi = '/org/freedesktop/Hal/devices/pcmcia__1__1'
>   info.udi = '/org/freedesktop/Hal/devices/pcmcia__1__1'  (string)
>   linux.subsystem = 'pcmcia'  (string)
>   linux.hotplug_type = 1  (0x1)  (int)
>   info.product = 'SDP'  (string)
>   info.vendor = 'SunDisk'  (string)
>   pcmcia.func_id = 4  (0x4)  (int)
>   pcmcia.card_id = 1025  (0x401)  (int)
>   pcmcia.manf_id = 69  (0x45)  (int)
>   pcmcia.prod_id3 = '5/3 0.6'  (string)
>   pcmcia.prod_id2 = 'SDP'  (string)
>   pcmcia.prod_id1 = 'SunDisk'  (string)
>   pcmcia.socket_number = 0  (0x0)  (int)
>   info.linux.driver = 'ide-cs'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/pci_1180_476_0'  (string)
>   info.bus = 'pcmcia'  (string)
>   linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.0/0.0'  (string)
>   linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/0.0'  (string)
>
> udi = '/org/freedesktop/Hal/devices/pcmcia__1__1_ide_2_0'
>   info.udi = '/org/freedesktop/Hal/devices/pcmcia__1__1_ide_2_0'  (string)
>   linux.subsystem = 'ide'  (string)
>   linux.hotplug_type = 1  (0x1)  (int)
>   info.product = 'IDE device (master)'  (string)
>   ide.channel = 0  (0x0)  (int)
>   ide.host = 2  (0x2)  (int)
>   info.linux.driver = 'ide-disk'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/pcmcia__1__1'  (string)
>   info.bus = 'ide'  (string)
>   linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.0/0.0/ide2/2.0'  (string)
>   linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/0.0/ide2/2.0'  (string)
>
> udi = '/org/freedesktop/Hal/devices/storage_serial_MT310344133'
>   block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_MT310344133'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/storage_serial_MT310344133'  (string)
>   storage.requires_eject = false  (bool)
>   storage.hotpluggable = true  (bool)
>   info.capabilities = {'storage', 'block'} (string list)
>   info.category = 'storage'  (string)
>   info.product = 'SunDisk SDCFB-16'  (string)
>   storage.removable = false  (bool)
>   storage.physical_device = '/org/freedesktop/Hal/devices/pcmcia__1__1'  (string)
>   storage.firmware_version = 'vcb_1.45'  (string)
>   storage.serial = 'MT310344133'  (string)
>   storage.vendor = ''  (string)
>   storage.model = 'SunDisk SDCFB-16'  (string)
>   storage.drive_type = 'disk'  (string)
>   storage.automount_enabled_hint = true  (bool)
>   storage.media_check_enabled = false  (bool)
>   storage.no_partitions_hint = false  (bool)
>   storage.bus = 'pcmcia'  (string)
>   block.is_volume = false  (bool)
>   block.minor = 0  (0x0)  (int)
>   block.major = 33  (0x21)  (int)
>   block.device = '/dev/hde'  (string)
>   linux.hotplug_type = 3  (0x3)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/pcmcia__1__1_ide_2_0'  (string)
>   linux.sysfs_path_device = '/sys/block/hde'  (string)
>   linux.sysfs_path = '/sys/block/hde'  (string)
>
> udi = '/org/freedesktop/Hal/devices/volume_uuid_F84F_8080'
>   info.hal_mount.mounted_by_uid = 500  (0x1f4)  (int)
>   info.hal_mount.created_mount_point = '/media/disk'  (string)
>   volume.unmount.valid_options = {'lazy'} (string list)
>   volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid='} (string list)
>   org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
>   info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
>   volume.ignore = false  (bool)
>   info.udi = '/org/freedesktop/Hal/devices/volume_uuid_F84F_8080'  (string)
>   volume.partition.msdos_part_table_type = 1  (0x1)  (int)
>   info.product = 'Volume (vfat)'  (string)
>   volume.size = 16007168  (0xf44000)  (uint64)
>   volume.num_blocks = 31264  (0x7a20)  (int)
>   volume.block_size = 512  (0x200)  (int)
>   volume.partition.number = 1  (0x1)  (int)
>   info.capabilities = {'volume', 'block'} (string list)
>   info.category = 'volume'  (string)
>   volume.is_partition = true  (bool)
>   volume.is_disc = false  (bool)
>   volume.is_mounted = true  (bool)
>   volume.mount_point = '/media/disk'  (string)
>   volume.label = ''  (string)
>   volume.uuid = 'F84F-8080'  (string)
>   volume.fsversion = 'FAT12'  (string)
>   volume.fsusage = 'filesystem'  (string)
>   volume.fstype = 'vfat'  (string)
>   storage.model = ''  (string)
>   block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_MT310344133'  (string)
>   block.is_volume = true  (bool)
>   block.minor = 1  (0x1)  (int)
>   block.major = 33  (0x21)  (int)
>   block.device = '/dev/hde1'  (string)
>   linux.hotplug_type = 3  (0x3)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/storage_serial_MT310344133'  (string)
>   linux.sysfs_path_device = '/sys/block/hde/hde1'  (string)
>   linux.sysfs_path = '/sys/block/hde/hde1'  (string)
>
1482c1581
< Dumped 78 device(s) from the Global Device List.
---
> Dumped 82 device(s) from the Global Device List.

オフライン

 

#5 2007-08-22 15:25:38

youre
メンバ
登録日: 2006-11-07

Re: CFアダプタ(PCMCIA)認識しない(Ubuntu6.10)

## ADTEC(AD-CFADP) + ADTEC(AD-CFG 32MB) CF の組み合わせ

2c2
< Dumping 78 device(s) from the Global Device List:
---
> Dumping 82 device(s) from the Global Device List:
1304a1305,1401
> udi = '/org/freedesktop/Hal/devices/pcmcia__1__1'
>   info.udi = '/org/freedesktop/Hal/devices/pcmcia__1__1'  (string)
>   linux.subsystem = 'pcmcia'  (string)
>   linux.hotplug_type = 1  (0x1)  (int)
>   info.product = 'Unknown (0x0401)'  (string)
>   info.vendor = '32MB'  (string)
>   pcmcia.func_id = 4  (0x4)  (int)
>   pcmcia.card_id = 1025  (0x401)  (int)
>   pcmcia.manf_id = 69  (0x45)  (int)
>   pcmcia.prod_id1 = '32MB'  (string)
>   pcmcia.socket_number = 0  (0x0)  (int)
>   info.linux.driver = 'ide-cs'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/pci_1180_476_0'  (string)
>   info.bus = 'pcmcia'  (string)
>   linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.0/0.0'  (string)
>   linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/0.0'  (string)
>
> udi = '/org/freedesktop/Hal/devices/pcmcia__1__1_ide_2_0'
>   info.udi = '/org/freedesktop/Hal/devices/pcmcia__1__1_ide_2_0'  (string)
>   linux.subsystem = 'ide'  (string)
>   linux.hotplug_type = 1  (0x1)  (int)
>   info.product = 'IDE device (master)'  (string)
>   ide.channel = 0  (0x0)  (int)
>   ide.host = 2  (0x2)  (int)
>   info.linux.driver = 'ide-disk'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/pcmcia__1__1'  (string)
>   info.bus = 'ide'  (string)
>   linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.0/0.0/ide2/2.0'  (string)
>   linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/0.0/ide2/2.0'  (string)
>
> udi = '/org/freedesktop/Hal/devices/storage_serial_PQI0000000000'
>   block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_PQI0000000000'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/storage_serial_PQI0000000000'  (string)
>   storage.requires_eject = false  (bool)
>   storage.hotpluggable = true  (bool)
>   info.capabilities = {'storage', 'block'} (string list)
>   info.category = 'storage'  (string)
>   info.product = 'PQI ATA Rev6.0'  (string)
>   storage.removable = false  (bool)
>   storage.physical_device = '/org/freedesktop/Hal/devices/pcmcia__1__1'  (string)
>   storage.firmware_version = 'XS3.00'  (string)
>   storage.serial = 'PQI0000000000'  (string)
>   storage.vendor = ''  (string)
>   storage.model = 'PQI ATA Rev6.0'  (string)
>   storage.drive_type = 'disk'  (string)
>   storage.automount_enabled_hint = true  (bool)
>   storage.media_check_enabled = false  (bool)
>   storage.no_partitions_hint = false  (bool)
>   storage.bus = 'pcmcia'  (string)
>   block.is_volume = false  (bool)
>   block.minor = 0  (0x0)  (int)
>   block.major = 33  (0x21)  (int)
>   block.device = '/dev/hde'  (string)
>   linux.hotplug_type = 3  (0x3)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/pcmcia__1__1_ide_2_0'  (string)
>   linux.sysfs_path_device = '/sys/block/hde'  (string)
>   linux.sysfs_path = '/sys/block/hde'  (string)
>
> udi = '/org/freedesktop/Hal/devices/volume_uuid_40C4_4EEA'
>   info.hal_mount.mounted_by_uid = 500  (0x1f4)  (int)
>   info.hal_mount.created_mount_point = '/media/disk'  (string)
>   volume.unmount.valid_options = {'lazy'} (string list)
>   volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid='} (string list)
>   org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
>   info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
>   volume.ignore = false  (bool)
>   info.udi = '/org/freedesktop/Hal/devices/volume_uuid_40C4_4EEA'  (string)
>   volume.partition.msdos_part_table_type = 4  (0x4)  (int)
>   info.product = 'Volume (vfat)'  (string)
>   volume.size = 32761856  (0x1f3e800)  (uint64)
>   volume.num_blocks = 63988  (0xf9f4)  (int)
>   volume.block_size = 512  (0x200)  (int)
>   volume.partition.number = 1  (0x1)  (int)
>   info.capabilities = {'volume', 'block'} (string list)
>   info.category = 'volume'  (string)
>   volume.is_partition = true  (bool)
>   volume.is_disc = false  (bool)
>   volume.is_mounted = true  (bool)
>   volume.mount_point = '/media/disk'  (string)
>   volume.label = ''  (string)
>   volume.uuid = '40C4-4EEA'  (string)
>   volume.fsversion = 'FAT16'  (string)
>   volume.fsusage = 'filesystem'  (string)
>   volume.fstype = 'vfat'  (string)
>   storage.model = ''  (string)
>   block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_PQI0000000000'  (string)
>   block.is_volume = true  (bool)
>   block.minor = 1  (0x1)  (int)
>   block.major = 33  (0x21)  (int)
>   block.device = '/dev/hde1'  (string)
>   linux.hotplug_type = 3  (0x3)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/storage_serial_PQI0000000000'  (string)
>   linux.sysfs_path_device = '/sys/block/hde/hde1'  (string)
>   linux.sysfs_path = '/sys/block/hde/hde1'  (string)
>
1482c1579
< Dumped 78 device(s) from the Global Device List.
---
> Dumped 82 device(s) from the Global Device List.

オフライン

 

#6 2007-08-22 15:26:56

youre
メンバ
登録日: 2006-11-07

Re: CFアダプタ(PCMCIA)認識しない(Ubuntu6.10)

## Fujitsu(FMV-J502) + SONY(MSA-16A 16MB) MEMORY STICKの組み合わせ

2c2
< Dumping 78 device(s) from the Global Device List:
---
> Dumping 82 device(s) from the Global Device List:
1304a1305,1401
> udi = '/org/freedesktop/Hal/devices/pcmcia__1__1'
>   info.udi = '/org/freedesktop/Hal/devices/pcmcia__1__1'  (string)
>   linux.subsystem = 'pcmcia'  (string)
>   linux.hotplug_type = 1  (0x1)  (int)
>   info.product = 'Memory Card Adapter'  (string)
>   info.vendor = ''  (string)
>   pcmcia.func_id = 4  (0x4)  (int)
>   pcmcia.card_id = 1025  (0x401)  (int)
>   pcmcia.manf_id = 69  (0x45)  (int)
>   pcmcia.prod_id2 = 'Memory Card Adapter'  (string)
>   pcmcia.prod_id1 = ''  (string)
>   pcmcia.socket_number = 0  (0x0)  (int)
>   info.linux.driver = 'ide-cs'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/pci_1180_476_0'  (string)
>   info.bus = 'pcmcia'  (string)
>   linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.0/0.0'  (string)
>   linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/0.0'  (string)
>
> udi = '/org/freedesktop/Hal/devices/pcmcia__1__1_ide_2_0'
>   info.udi = '/org/freedesktop/Hal/devices/pcmcia__1__1_ide_2_0'  (string)
>   linux.subsystem = 'ide'  (string)
>   linux.hotplug_type = 1  (0x1)  (int)
>   info.product = 'IDE device (master)'  (string)
>   ide.channel = 0  (0x0)  (int)
>   ide.host = 2  (0x2)  (int)
>   info.linux.driver = 'ide-disk'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/pcmcia__1__1'  (string)
>   info.bus = 'ide'  (string)
>   linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.0/0.0/ide2/2.0'  (string)
>   linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/0.0/ide2/2.0'  (string)
>
> udi = '/org/freedesktop/Hal/devices/storage_model_Memory_Card_Adapter'
>   block.storage_device = '/org/freedesktop/Hal/devices/storage_model_Memory_Card_Adapter'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/storage_model_Memory_Card_Adapter'  (string)
>   storage.requires_eject = false  (bool)
>   storage.hotpluggable = true  (bool)
>   info.capabilities = {'storage', 'block'} (string list)
>   info.category = 'storage'  (string)
>   info.product = 'Memory Card Adapter'  (string)
>   storage.removable = false  (bool)
>   storage.physical_device = '/org/freedesktop/Hal/devices/pcmcia__1__1'  (string)
>   storage.firmware_version = '20011212'  (string)
>   storage.vendor = ''  (string)
>   storage.model = 'Memory Card Adapter'  (string)
>   storage.drive_type = 'disk'  (string)
>   storage.automount_enabled_hint = true  (bool)
>   storage.media_check_enabled = false  (bool)
>   storage.no_partitions_hint = false  (bool)
>   storage.bus = 'pcmcia'  (string)
>   block.is_volume = false  (bool)
>   block.minor = 0  (0x0)  (int)
>   block.major = 33  (0x21)  (int)
>   block.device = '/dev/hde'  (string)
>   linux.hotplug_type = 3  (0x3)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/pcmcia__1__1_ide_2_0'  (string)
>   linux.sysfs_path_device = '/sys/block/hde'  (string)
>   linux.sysfs_path = '/sys/block/hde'  (string)
>
> udi = '/org/freedesktop/Hal/devices/volume_part1_size_16174592'
>   info.hal_mount.mounted_by_uid = 500  (0x1f4)  (int)
>   info.hal_mount.created_mount_point = '/media/disk'  (string)
>   volume.unmount.valid_options = {'lazy'} (string list)
>   volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid='} (string list)
>   org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
>   info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
>   volume.ignore = false  (bool)
>   info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_16174592'  (string)
>   volume.partition.msdos_part_table_type = 1  (0x1)  (int)
>   info.product = 'Volume (vfat)'  (string)
>   volume.size = 16174592  (0xf6ce00)  (uint64)
>   volume.num_blocks = 31591  (0x7b67)  (int)
>   volume.block_size = 512  (0x200)  (int)
>   volume.partition.number = 1  (0x1)  (int)
>   info.capabilities = {'volume', 'block'} (string list)
>   info.category = 'volume'  (string)
>   volume.is_partition = true  (bool)
>   volume.is_disc = false  (bool)
>   volume.is_mounted = true  (bool)
>   volume.mount_point = '/media/disk'  (string)
>   volume.label = ''  (string)
>   volume.uuid = ''  (string)
>   volume.fsversion = 'FAT12'  (string)
>   volume.fsusage = 'filesystem'  (string)
>   volume.fstype = 'vfat'  (string)
>   storage.model = ''  (string)
>   block.storage_device = '/org/freedesktop/Hal/devices/storage_model_Memory_Card_Adapter'  (string)
>   block.is_volume = true  (bool)
>   block.minor = 1  (0x1)  (int)
>   block.major = 33  (0x21)  (int)
>   block.device = '/dev/hde1'  (string)
>   linux.hotplug_type = 3  (0x3)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/storage_model_Memory_Card_Adapter'  (string)
>   linux.sysfs_path_device = '/sys/block/hde/hde1'  (string)
>   linux.sysfs_path = '/sys/block/hde/hde1'  (string)
>
1482c1579
< Dumped 78 device(s) from the Global Device List.
---
> Dumped 82 device(s) from the Global Device List.

オフライン

 

#7 2007-08-22 15:29:07

youre
メンバ
登録日: 2006-11-07

Re: CFアダプタ(PCMCIA)認識しない(Ubuntu6.10)

## Fujitsu(FMV-J502) + GREENHOUSE(microSD 128MB) SDカードの組み合わせ


2c2
< Dumping 78 device(s) from the Global Device List:
---
> Dumping 82 device(s) from the Global Device List:
1304a1305,1402
> udi = '/org/freedesktop/Hal/devices/pcmcia__1__1'
>   info.udi = '/org/freedesktop/Hal/devices/pcmcia__1__1'  (string)
>   linux.subsystem = 'pcmcia'  (string)
>   linux.hotplug_type = 1  (0x1)  (int)
>   info.product = 'Memory Card Adapter'  (string)
>   info.vendor = ''  (string)
>   pcmcia.func_id = 4  (0x4)  (int)
>   pcmcia.card_id = 1025  (0x401)  (int)
>   pcmcia.manf_id = 69  (0x45)  (int)
>   pcmcia.prod_id2 = 'Memory Card Adapter'  (string)
>   pcmcia.prod_id1 = ''  (string)
>   pcmcia.socket_number = 0  (0x0)  (int)
>   info.linux.driver = 'ide-cs'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/pci_1180_476_0'  (string)
>   info.bus = 'pcmcia'  (string)
>   linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.0/0.0'  (string)
>   linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/0.0'  (string)
>
> udi = '/org/freedesktop/Hal/devices/pcmcia__1__1_ide_2_0'
>   info.udi = '/org/freedesktop/Hal/devices/pcmcia__1__1_ide_2_0'  (string)
>   linux.subsystem = 'ide'  (string)
>   linux.hotplug_type = 1  (0x1)  (int)
>   info.product = 'IDE device (master)'  (string)
>   ide.channel = 0  (0x0)  (int)
>   ide.host = 2  (0x2)  (int)
>   info.linux.driver = 'ide-disk'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/pcmcia__1__1'  (string)
>   info.bus = 'ide'  (string)
>   linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:0e.0/0.0/ide2/2.0'  (string)
>   linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/0.0/ide2/2.0'  (string)
>
> udi = '/org/freedesktop/Hal/devices/storage_serial_000000000000'
>   block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_000000000000'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/storage_serial_000000000000'  (string)
>   storage.requires_eject = false  (bool)
>   storage.hotpluggable = true  (bool)
>   info.capabilities = {'storage', 'block'} (string list)
>   info.category = 'storage'  (string)
>   info.product = 'Memory Card Adapter'  (string)
>   storage.removable = false  (bool)
>   storage.physical_device = '/org/freedesktop/Hal/devices/pcmcia__1__1'  (string)
>   storage.firmware_version = '20011212'  (string)
>   storage.serial = '000000000000'  (string)
>   storage.vendor = ''  (string)
>   storage.model = 'Memory Card Adapter'  (string)
>   storage.drive_type = 'disk'  (string)
>   storage.automount_enabled_hint = true  (bool)
>   storage.media_check_enabled = false  (bool)
>   storage.no_partitions_hint = false  (bool)
>   storage.bus = 'pcmcia'  (string)
>   block.is_volume = false  (bool)
>   block.minor = 0  (0x0)  (int)
>   block.major = 33  (0x21)  (int)
>   block.device = '/dev/hde'  (string)
>   linux.hotplug_type = 3  (0x3)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/pcmcia__1__1_ide_2_0'  (string)
>   linux.sysfs_path_device = '/sys/block/hde'  (string)
>   linux.sysfs_path = '/sys/block/hde'  (string)
>
> udi = '/org/freedesktop/Hal/devices/volume_uuid_17B8_C05B'
>   info.hal_mount.mounted_by_uid = 500  (0x1f4)  (int)
>   info.hal_mount.created_mount_point = '/media/disk'  (string)
>   volume.unmount.valid_options = {'lazy'} (string list)
>   volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'noexec', 'quiet', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid='} (string list)
>   org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-system-storage-mount', 'hal-system-storage-unmount', 'hal-system-storage-eject'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
>   info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
>   volume.ignore = false  (bool)
>   info.udi = '/org/freedesktop/Hal/devices/volume_uuid_17B8_C05B'  (string)
>   volume.partition.msdos_part_table_type = 6  (0x6)  (int)
>   info.product = 'Volume (vfat)'  (string)
>   volume.size = 126303744  (0x7873e00)  (uint64)
>   volume.num_blocks = 246687  (0x3c39f)  (int)
>   volume.block_size = 512  (0x200)  (int)
>   volume.partition.number = 1  (0x1)  (int)
>   info.capabilities = {'volume', 'block'} (string list)
>   info.category = 'volume'  (string)
>   volume.is_partition = true  (bool)
>   volume.is_disc = false  (bool)
>   volume.is_mounted = true  (bool)
>   volume.mount_point = '/media/disk'  (string)
>   volume.label = ''  (string)
>   volume.uuid = '17B8-C05B'  (string)
>   volume.fsversion = 'FAT16'  (string)
>   volume.fsusage = 'filesystem'  (string)
>   volume.fstype = 'vfat'  (string)
>   storage.model = ''  (string)
>   block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_000000000000'  (string)
>   block.is_volume = true  (bool)
>   block.minor = 1  (0x1)  (int)
>   block.major = 33  (0x21)  (int)
>   block.device = '/dev/hde1'  (string)
>   linux.hotplug_type = 3  (0x3)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/storage_serial_000000000000'  (string)
>   linux.sysfs_path_device = '/sys/block/hde/hde1'  (string)
>   linux.sysfs_path = '/sys/block/hde/hde1'  (string)
>
1482c1580
< Dumped 78 device(s) from the Global Device List.
---
> Dumped 82 device(s) from the Global Device List.

オフライン

 

#8 2007-08-22 15:37:05

youre
メンバ
登録日: 2006-11-07

Re: CFアダプタ(PCMCIA)認識しない(Ubuntu6.10)

フォーラム内で"CF"で検索したときに得られた記事

"リムーバブルメディアのアンマウント不可"
http://forum.ubuntulinux.jp/viewtopic.php?pid=1496#p1496

USBストレージメディアのことだったので, 関係なさそうに思っていたのですが,
/usr/share/hal/fdi/policy/10osvendor/10-storage-policy.fdi
とかが関係しているのかも知れません.

もう少し調べてみます.

オフライン

 

#9 2007-08-23 00:46:04

hito
管理者
登録日: 2007-03-18

Re: CFアダプタ(PCMCIA)認識しない(Ubuntu6.10)

えーと、halの問題に限定して調べられているようですが、dmesgでは見えているのでしょうか?

オフライン

 

#10 2007-08-23 09:50:46

youre
メンバ
登録日: 2006-11-07

Re: CFアダプタ(PCMCIA)認識しない(Ubuntu6.10)

おはようございます
いつもおさがわせしています〜

> dmesgでは見えているのでしょうか?

dmesgにはなにも出ていません.
何か出ていると期待していたのですが…

上記の lshal 出力はすべて Fedora Core 5 で取ったもので,
Ubuntu 6.10 ではなにも出ていません.
自動検出が働いていないみたいです.

追試で同じパソコンに, ほかのOSを入れて期待する動作ができるかやっています.
Windows XP Professional SP2 では, 期待どおりに動いています.
VineLinux 4.1 では, Ubuntu 6.10と同じ状況の様です. dmesg出力もありません.


スレッドが長くなってしまったので,
もういちど何をしたいのかですが…

1. なにをしたいのか,
    PCMCIA接続のメモリカードアダプタを使用したい.

2. 使用するメディア
    CF, SD, MemoryStick
    (いま手元にあるメディアがこれだけなので…)

3. 期待している操作
    メディアをセットしたアダプタをPCMCIAスロットへ差し込み
    自動認識→メディアのオートマウントをさせたい.


調べ始めた発端は, 初心者サポートの このスレッドです.
"CFタイプのPCカードアダプタが認識しない"
http://forum.ubuntulinux.jp/viewtopic.php?id=631

カメラのUSB接続ができないのかな〜と言ってありますけれど.
PCMCIA接続のメディアアダプタが全滅(?)はマズイのではないかと…


同じメディアをUSB接続のリーダライタで接続した際に言われていた
自動認識のプロセスが1つだけしか動いていない気がするのですが,
これは気にしないで良いのでしょうか?

> 前回(USB-MR/W)で取る様に言われてたので,一応.
> # ps ax | grep hald
> 4401 ?        Ss     0:03 /usr/sbin/hald
> 4402 ?        S      0:00 hald-runner
> 4408 ?        S      0:00 /usr/lib/hal/hald-addon-acpi
> 4447 ?        S      0:00 /usr/lib/hal/hald-addon-keyboard
> 4468 ?        S      0:00 /usr/lib/hal/hald-addon-storage    (←これだけ?)
> 6608 pts/0    R+     0:00 grep hald

dmesgはもういちど良くみてみます.

PS.
VineLinux4.1でもバグレポートが出ているみたいです.

"388: KDEで自動マウントができない"
http://bts.vinelinux.org/guest.cgi?project=VineLinux&action=view_report&id=388

このスレッドの中に

> 私の環境(ThinkPad X31)では、
> 1. PCMCIAスロットに入れたCFやSDカードが自動マウントされない
    (中略)
> という内容の50-pcmcia-compact-flash.fdiなんて名前のファイルを
> /usr/share/hal/fde/policy/10osvendorの中に置いて、
> haldaemonをrestartしたら解決しました。

と,ありました.これを追試中です.
まだエラーが出ていてOS自体が落ちそうなので〜
内容をみて頂いて,こうしたほうが良いと指示して頂けたらと思います.

更にPS.
上記の "50-pcmcia-compact-flash.fdi" を追加して.
# /etc/rc.d/init.d/haldaemon restart して,
Adaptecのアダプタを挿入したあと,dmesgを見ると
以下のメッセージが出ていました.
自動認識が動き始めているみたいです.

pccard: PCMCIA card inserted into slot 0
cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia: registering new device pcmcia0.0
Probing IDE interface ide1...
hdc: , ATA DISK drive
ide1 at 0x3e0-0x3e7,0x3ee on irq 3
hdc: max request size: 128KiB
hdc: 314432 sectors (160 MB) w/34KiB Cache, CHS=68/68/68
hdc: INVALID GEOMETRY: 68 PHYSICAL HEADS?
hdc:hdc: set_multmode: status=0x51 { DriveReady SeekComplete Error }
hdc: set_multmode: error=0x00 { }
ide: failed opcode was: unknown
unknown partition table
ide-cs: hdc: Vcc = 3.3, Vpp = 0.0
hdc: status timeout: status=0xff { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
ide1: reset timed-out, status=0xff
hdc: status timeout: status=0xff { Busy }
ide: failed opcode was: unknown
hdc: drive not ready for command
ide1: reset timed-out, status=0xff
end_request: I/O error, dev hdc, sector 314240
Buffer I/O error on device hdc, logical block 39280
end_request: I/O error, dev hdc, sector 314240
Buffer I/O error on device hdc, logical block 39280
end_request: I/O error, dev hdc, sector 314424
Buffer I/O error on device hdc, logical block 39303
end_request: I/O error, dev hdc, sector 314424
Buffer I/O error on device hdc, logical block 39303
end_request: I/O error, dev hdc, sector 314424
Buffer I/O error on device hdc, logical block 39303
end_request: I/O error, dev hdc, sector 314424
Buffer I/O error on device hdc, logical block 39303
end_request: I/O error, dev hdc, sector 314424
Buffer I/O error on device hdc, logical block 39303
end_request: I/O error, dev hdc, sector 314424
Buffer I/O error on device hdc, logical block 39303
end_request: I/O error, dev hdc, sector 314368
Buffer I/O error on device hdc, logical block 39296
end_request: I/O error, dev hdc, sector 314368
Buffer I/O error on device hdc, logical block 39296
end_request: I/O error, dev hdc, sector 314416
end_request: I/O error, dev hdc, sector 314416
end_request: I/O error, dev hdc, sector 314424
end_request: I/O error, dev hdc, sector 314424
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 8
end_request: I/O error, dev hdc, sector 16
end_request: I/O error, dev hdc, sector 24
end_request: I/O error, dev hdc, sector 32
end_request: I/O error, dev hdc, sector 40
end_request: I/O error, dev hdc, sector 48
end_request: I/O error, dev hdc, sector 56
end_request: I/O error, dev hdc, sector 64
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 72
end_request: I/O error, dev hdc, sector 80
end_request: I/O error, dev hdc, sector 88
end_request: I/O error, dev hdc, sector 96
end_request: I/O error, dev hdc, sector 104
end_request: I/O error, dev hdc, sector 112
end_request: I/O error, dev hdc, sector 120
end_request: I/O error, dev hdc, sector 128
end_request: I/O error, dev hdc, sector 136
end_request: I/O error, dev hdc, sector 144
end_request: I/O error, dev hdc, sector 152
end_request: I/O error, dev hdc, sector 160
end_request: I/O error, dev hdc, sector 168
end_request: I/O error, dev hdc, sector 176
end_request: I/O error, dev hdc, sector 184
end_request: I/O error, dev hdc, sector 192
end_request: I/O error, dev hdc, sector 200
end_request: I/O error, dev hdc, sector 208
end_request: I/O error, dev hdc, sector 216
end_request: I/O error, dev hdc, sector 224
end_request: I/O error, dev hdc, sector 232
end_request: I/O error, dev hdc, sector 240
end_request: I/O error, dev hdc, sector 248
end_request: I/O error, dev hdc, sector 256
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 8
end_request: I/O error, dev hdc, sector 16
end_request: I/O error, dev hdc, sector 24
end_request: I/O error, dev hdc, sector 32
end_request: I/O error, dev hdc, sector 40
end_request: I/O error, dev hdc, sector 48
end_request: I/O error, dev hdc, sector 56
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 64
end_request: I/O error, dev hdc, sector 72
end_request: I/O error, dev hdc, sector 80
end_request: I/O error, dev hdc, sector 88
end_request: I/O error, dev hdc, sector 96
end_request: I/O error, dev hdc, sector 104
end_request: I/O error, dev hdc, sector 112
end_request: I/O error, dev hdc, sector 120
end_request: I/O error, dev hdc, sector 128
end_request: I/O error, dev hdc, sector 136
end_request: I/O error, dev hdc, sector 144
end_request: I/O error, dev hdc, sector 152
end_request: I/O error, dev hdc, sector 160
end_request: I/O error, dev hdc, sector 168
end_request: I/O error, dev hdc, sector 176
end_request: I/O error, dev hdc, sector 184
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 192
end_request: I/O error, dev hdc, sector 200
end_request: I/O error, dev hdc, sector 208
end_request: I/O error, dev hdc, sector 216
end_request: I/O error, dev hdc, sector 224
end_request: I/O error, dev hdc, sector 232
end_request: I/O error, dev hdc, sector 240
end_request: I/O error, dev hdc, sector 248
end_request: I/O error, dev hdc, sector 256
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0
end_request: I/O error, dev hdc, sector 0

デバイスのパラメータ(CHS)をいろいろ変えてアクセスを試しているみたいですね.

最後の編集者: youre (2007-08-23 11:25:14)

オフライン

 

#11 2007-08-23 16:50:54

youre
メンバ
登録日: 2006-11-07

Re: CFアダプタ(PCMCIA)認識しない(Ubuntu6.10)

Fedora Core 5 で, 上手くオートマウント出来ている時の dmesg 出力

pccard: PCMCIA card inserted into slot 0
cs: memory probe 0xa0000000-0xa0ffffff: clean.
pcmcia: registering new device pcmcia0.0
Probing IDE interface ide1...
hdc: PQI ATA Rev6.0, CFA DISK drive
ide1 at 0x100-0x107,0x10e on irq 3
hdc: max request size: 128KiB
hdc: 64000 sectors (32 MB) w/0KiB Cache, CHS=1000/16/4
hdc: hdc1
ide-cs: hdc: Vpp = 0.0
SELinux: initialized (dev hdc1, type vfat), uses genfs_contexts
$

オフライン

 

Board footer

Powered by FluxBB