Ubuntu日本語フォーラム
ログインしていません。
お知らせ
#1 2010-05-04 15:23:29
- wooper194
- メンバ
- From: Yokohama, Japan
- 登録日: 2010-04-30
ログイン後、数秒~１分でフリーズする
Ubuntuを使ってみようと最近思い始めたLinux初心者です。
USBメモリでUbuntu 10.04を使おうと考えて、
Live CDからインストールしたのですが、どうやらログインしてから数秒～１分以内にフリーズしてしまいます。
Live CDから直接起動した場合でも、同様の症状が発生します。
（以前投稿した無線LANは関係なかったようです、すみません）
他のPCでは正常に起動できたので、何かハードウェアに問題があるのかな？ と思って投稿している次第です。
ちなみに、Alt+PSのコマンドは使えました。
どこに問題があるのか全く特定できないのですが、どうすれば良いでしょうか？
＜PC環境＞
o'zzio MX Series MXV4260SDPR
CPU: Intel Celeron 1.60GHz
RAM: 1GB
(OS: Windows Vista Home Premium SP2)
オフライン
#2 2010-05-04 15:30:58
- wooper194
- メンバ
- From: Yokohama, Japan
- 登録日: 2010-04-30
Re: ログイン後、数秒~１分でフリーズする
書き忘れていましたが、インストールしたUSBメモリの情報です。
A-DATA C801
容量: 4GB
USB2.0実装
以上です。
オフライン
#3 2010-05-04 16:13:57
- hmatsue
- アドバイザ
- 登録日: 2009-03-10
Re: ログイン後、数秒~１分でフリーズする
フリーズした、という状態で、
SysReq + Alt + B
とか押すと再起動がかかりますでしょうか。
再起動したあと、/var/log以下を探ってなにかフリーズに関するログを見つけることができれば、なにかコメントがつくかも。
kern.log
syslog
messages
あたりになにか残っていないでしょうか。
オフライン
#4 2010-05-04 16:36:54
- wooper194
- メンバ
- From: Yokohama, Japan
- 登録日: 2010-04-30
Re: ログイン後、数秒~１分でフリーズする
再起動したあと、/var/log以下を探ってなにかフリーズに関するログを見つけることができれば、なにかコメントがつくかも。
これは、Ubuntu上で見るしかないのでしょうか？（Ubuntuにログインしてすぐフリーズするので）
Knoppixも手元にあるのですが、そちらから見ることはできますでしょうか？
オフライン
#5 2010-05-04 16:51:27
- hmatsue
- アドバイザ
- 登録日: 2009-03-10
Re: ログイン後、数秒~１分でフリーズする
Knoppixなどからでも見れます。
Ubuntuパーティションをマウントして、Ubuntuとして起動した際に、/var/logであった場所を探してみて下さい。
オフライン
#6 2010-05-05 11:36:32
- wooper194
- メンバ
- From: Yokohama, Japan
- 登録日: 2010-04-30
Re: ログイン後、数秒~１分でフリーズする
とりあえず、
kern.log
syslog
messages
を引っ張ってきました。かなり長いのですが、とりあえず全てはります。
kern.log
コード:
May 5 18:39:08 wooper194-USB kernel: imklog 4.2.0, log source = /proc/kmsg started. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Initializing cgroup subsys cpuset May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Initializing cgroup subsys cpu May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] KERNEL supported cpus: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Intel GenuineIntel May 5 18:39:08 wooper194-USB kernel: [ 0.000000] AMD AuthenticAMD May 5 18:39:08 wooper194-USB kernel: [ 0.000000] NSC Geode by NSC May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Cyrix CyrixInstead May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Centaur CentaurHauls May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Transmeta GenuineTMx86 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Transmeta TransmetaCPU May 5 18:39:08 wooper194-USB kernel: [ 0.000000] UMC UMC UMC UMC May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-provided physical RAM map: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7c0000 (usable) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 000000003f7c0000 - 000000003f7ce000 (ACPI data) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 000000003f7ce000 - 000000003f800000 (ACPI NVS) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] DMI present. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] last_pfn = 0x3f7c0 max_arch_pfn = 0x100000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] MTRR default type: uncachable May 5 18:39:08 wooper194-USB kernel: [ 0.000000] MTRR fixed ranges enabled: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 00000-9FFFF write-back May 5 18:39:08 wooper194-USB kernel: [ 0.000000] A0000-DFFFF uncachable May 5 18:39:08 wooper194-USB kernel: [ 0.000000] E0000-EFFFF write-through May 5 18:39:08 wooper194-USB kernel: [ 0.000000] F0000-FFFFF write-protect May 5 18:39:08 wooper194-USB kernel: [ 0.000000] MTRR variable ranges enabled: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 1 base 03F800000 mask FFF800000 uncachable May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 2 disabled May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 3 disabled May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 4 disabled May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 5 disabled May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 6 disabled May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 7 disabled May 5 18:39:08 wooper194-USB kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Scanning 0 areas for low memory corruption May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified physical RAM map: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 0000000000100000 - 000000003f7c0000 (usable) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 000000003f7c0000 - 000000003f7ce000 (ACPI data) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 000000003f7ce000 - 000000003f800000 (ACPI NVS) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 00000000ffb80000 - 0000000100000000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] initial memory mapped : 0 - 00c00000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Using x86 segment limits to approximate NX protection May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 0000000000 - 0000400000 page 4k May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 0000400000 - 0037400000 page 2M May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 0037400000 - 00377fe000 page 4k May 5 18:39:08 wooper194-USB kernel: [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] RAMDISK: 2f29c000 - 2fa0f64e May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: RSDP 000fa2d0 00014 (v00 synnex) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: RSDT 3f7c0000 0003C (v01 Mouse Computer 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: FACP 3f7c0200 00084 (v02 Mouse OEMFACP 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: DSDT 3f7c05c0 04FA3 (v01 12345 12345123 00000000 INTL 20051117) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: FACS 3f7ce000 00040 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: APIC 3f7c0390 0006C (v01 Mouse OEMAPIC 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: MCFG 3f7c0400 0003C (v01 Mouse OEMMCFG 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: SLIC 3f7c0440 00176 (v01 Mouse Computer 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: OEMB 3f7ce040 00060 (v01 Mouse AMI_OEM 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: HPET 3f7c5570 00038 (v01 Mouse OEMHPET 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 127MB HIGHMEM available. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 887MB LOWMEM available. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] mapped low ram: 0 - 377fe000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] low ram: 0 - 377fe000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] node 0 low ram: 00000000 - 377fe000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] node 0 bootmap 00011000 - 00017f00 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #4 [002f29c000 - 002fa0f64e] RAMDISK ==> [002f29c000 - 002fa0f64e] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #6 [00008da000 - 00008dd12b] BRK ==> [00008da000 - 00008dd12b] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] found SMP MP-table at [c00ff780] ff780 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Zone PFN ranges: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Normal 0x00001000 -> 0x000377fe May 5 18:39:08 wooper194-USB kernel: [ 0.000000] HighMem 0x000377fe -> 0x0003f7c0 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Movable zone start PFN for each node May 5 18:39:08 wooper194-USB kernel: [ 0.000000] early_node_map[2] active PFN ranges May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 0: 0x00000100 -> 0x0003f7c0 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] On node 0 totalpages: 259919 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001200 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] DMA zone: 32 pages used for memmap May 5 18:39:08 wooper194-USB kernel: [ 0.000000] DMA zone: 0 pages reserved May 5 18:39:08 wooper194-USB kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Normal zone: 1744 pages used for memmap May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] HighMem zone: 256 pages used for memmap May 5 18:39:08 wooper194-USB kernel: [ 0.000000] HighMem zone: 32450 pages, LIFO batch:7 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Using APIC driver default May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: IRQ0 used by override. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: IRQ2 used by override. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: IRQ9 used by override. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs May 5 18:39:08 wooper194-USB kernel: [ 0.000000] nr_irqs_gsi: 24 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware May 5 18:39:08 wooper194-USB kernel: [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u1048576 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257887 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=5e9b7ea4-434a-4639-84d2-32a05de1cd0d ro quiet splash May 5 18:39:08 wooper194-USB kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Enabling fast FPU save and restore... done. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Initializing CPU#0 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] allocated 5200320 bytes of page_cgroup May 5 18:39:08 wooper194-USB kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f7c0) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Memory: 1008932k/1040128k available (4673k kernel code, 29956k reserved, 2122k data, 656k init, 130824k highmem) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] virtual kernel memory layout: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Hierarchical RCU implementation. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:440 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Console: colour VGA+ 80x25 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] console [tty0] enabled May 5 18:39:08 wooper194-USB kernel: [ 0.000000] hpet clockevent registered May 5 18:39:08 wooper194-USB kernel: [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Fast TSC calibration using PIT May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Detected 1596.310 MHz processor. May 5 18:39:08 wooper194-USB kernel: [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.62 BogoMIPS (lpj=6385240) May 5 18:39:08 wooper194-USB kernel: [ 0.004027] Security Framework initialized May 5 18:39:08 wooper194-USB kernel: [ 0.004052] AppArmor: AppArmor initialized May 5 18:39:08 wooper194-USB kernel: [ 0.004060] Mount-cache hash table entries: 512 May 5 18:39:08 wooper194-USB kernel: [ 0.004222] Initializing cgroup subsys ns May 5 18:39:08 wooper194-USB kernel: [ 0.004228] Initializing cgroup subsys cpuacct May 5 18:39:08 wooper194-USB kernel: [ 0.004234] Initializing cgroup subsys memory May 5 18:39:08 wooper194-USB kernel: [ 0.004243] Initializing cgroup subsys devices May 5 18:39:08 wooper194-USB kernel: [ 0.004246] Initializing cgroup subsys freezer May 5 18:39:08 wooper194-USB kernel: [ 0.004248] Initializing cgroup subsys net_cls May 5 18:39:08 wooper194-USB kernel: [ 0.004273] CPU: L1 I cache: 32K, L1 D cache: 32K May 5 18:39:08 wooper194-USB kernel: [ 0.004277] CPU: L2 cache: 512K May 5 18:39:08 wooper194-USB kernel: [ 0.004283] mce: CPU supports 6 MCE banks May 5 18:39:08 wooper194-USB kernel: [ 0.004293] CPU0: Thermal monitoring enabled (TM2) May 5 18:39:08 wooper194-USB kernel: [ 0.004298] using mwait in idle threads. May 5 18:39:08 wooper194-USB kernel: [ 0.004305] Performance Events: Core2 events, Intel PMU driver. May 5 18:39:08 wooper194-USB kernel: [ 0.004315] ... version: 2 May 5 18:39:08 wooper194-USB kernel: [ 0.004317] ... bit width: 40 May 5 18:39:08 wooper194-USB kernel: [ 0.004319] ... generic registers: 2 May 5 18:39:08 wooper194-USB kernel: [ 0.004322] ... value mask: 000000ffffffffff May 5 18:39:08 wooper194-USB kernel: [ 0.004324] ... max period: 000000007fffffff May 5 18:39:08 wooper194-USB kernel: [ 0.004327] ... fixed-purpose events: 3 May 5 18:39:08 wooper194-USB kernel: [ 0.004329] ... event mask: 0000000700000003 May 5 18:39:08 wooper194-USB kernel: [ 0.004335] Checking 'hlt' instruction... OK. May 5 18:39:08 wooper194-USB kernel: [ 0.021100] SMP alternatives: switching to UP code May 5 18:39:08 wooper194-USB kernel: [ 0.030669] ACPI: Core revision 20090903 May 5 18:39:08 wooper194-USB kernel: [ 0.040012] ftrace: converting mcount calls to 0f 1f 44 00 00 May 5 18:39:08 wooper194-USB kernel: [ 0.040019] ftrace: allocating 21771 entries in 43 pages May 5 18:39:08 wooper194-USB kernel: [ 0.044075] Enabling APIC mode: Flat. Using 1 I/O APICs May 5 18:39:08 wooper194-USB kernel: [ 0.044392] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 May 5 18:39:08 wooper194-USB kernel: [ 0.090139] CPU0: Intel(R) Celeron(R) CPU 420 @ 1.60GHz stepping 01 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] Brought up 1 CPUs May 5 18:39:08 wooper194-USB kernel: [ 0.092001] Total of 1 processors activated (3192.62 BogoMIPS). May 5 18:39:08 wooper194-USB kernel: [ 0.092001] CPU0 attaching NULL sched-domain. May 5 18:39:08 wooper194-USB kernel: [ 0.092001] devtmpfs: initialized May 5 18:39:08 wooper194-USB kernel: [ 0.092001] regulator: core version 0.5 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] Time: 18:38:59 Date: 05/05/10 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] NET: Registered protocol family 16 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] EISA bus registered May 5 18:39:08 wooper194-USB kernel: [ 0.092001] ACPI: bus type pci registered May 5 18:39:08 wooper194-USB kernel: [ 0.092001] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support. May 5 18:39:08 wooper194-USB kernel: [ 0.092001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] PCI: Not using MMCONFIG. May 5 18:39:08 wooper194-USB kernel: [ 0.092001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] PCI: Using configuration type 1 for base access May 5 18:39:08 wooper194-USB kernel: [ 0.092001] bio: create slab <bio-0> at 0 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] ACPI: EC: Look up EC in DSDT May 5 18:39:08 wooper194-USB kernel: [ 0.097373] ACPI: Executed 1 blocks of module-level executable AML code May 5 18:39:08 wooper194-USB kernel: [ 0.102832] ACPI: Interpreter enabled May 5 18:39:08 wooper194-USB kernel: [ 0.102840] ACPI: (supports S0 S3 S4 S5) May 5 18:39:08 wooper194-USB kernel: [ 0.102866] ACPI: Using IOAPIC for interrupt routing May 5 18:39:08 wooper194-USB kernel: [ 0.115279] ACPI Warning: Incorrect checksum in table [OEMB] - FF, should be FE (20090903/tbutils-314) May 5 18:39:08 wooper194-USB kernel: [ 0.115415] ACPI: No dock devices found. May 5 18:39:08 wooper194-USB kernel: [ 0.115565] ACPI: PCI Root Bridge [PCI0] (0000:00) May 5 18:39:08 wooper194-USB kernel: [ 0.115666] pci 0000:00:02.0: reg 10 32bit mmio: [0xfea80000-0xfeafffff] May 5 18:39:08 wooper194-USB kernel: [ 0.115672] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07] May 5 18:39:08 wooper194-USB kernel: [ 0.115678] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff] May 5 18:39:08 wooper194-USB kernel: [ 0.115684] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfea40000-0xfea7ffff] May 5 18:39:08 wooper194-USB kernel: [ 0.115770] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfea38000-0xfea3bfff] May 5 18:39:08 wooper194-USB kernel: [ 0.115817] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold May 5 18:39:08 wooper194-USB kernel: [ 0.115822] pci 0000:00:1b.0: PME# disabled May 5 18:39:08 wooper194-USB kernel: [ 0.115868] pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f] May 5 18:39:08 wooper194-USB kernel: [ 0.115921] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f] May 5 18:39:08 wooper194-USB kernel: [ 0.115973] pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f] May 5 18:39:08 wooper194-USB kernel: [ 0.116039] pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f] May 5 18:39:08 wooper194-USB kernel: [ 0.116097] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfea37c00-0xfea37fff] May 5 18:39:08 wooper194-USB kernel: [ 0.116152] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold May 5 18:39:08 wooper194-USB kernel: [ 0.116158] pci 0000:00:1d.7: PME# disabled May 5 18:39:08 wooper194-USB kernel: [ 0.116291] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO May 5 18:39:08 wooper194-USB kernel: [ 0.116296] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO May 5 18:39:08 wooper194-USB kernel: [ 0.116300] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) May 5 18:39:08 wooper194-USB kernel: [ 0.116347] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] May 5 18:39:08 wooper194-USB kernel: [ 0.116354] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] May 5 18:39:08 wooper194-USB kernel: [ 0.116362] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] May 5 18:39:08 wooper194-USB kernel: [ 0.116369] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] May 5 18:39:08 wooper194-USB kernel: [ 0.116377] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] May 5 18:39:08 wooper194-USB kernel: [ 0.116422] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087] May 5 18:39:08 wooper194-USB kernel: [ 0.116429] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003] May 5 18:39:08 wooper194-USB kernel: [ 0.116435] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07] May 5 18:39:08 wooper194-USB kernel: [ 0.116442] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883] May 5 18:39:08 wooper194-USB kernel: [ 0.116449] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f] May 5 18:39:08 wooper194-USB kernel: [ 0.116476] pci 0000:00:1f.2: PME# supported from D3hot May 5 18:39:08 wooper194-USB kernel: [ 0.116480] pci 0000:00:1f.2: PME# disabled May 5 18:39:08 wooper194-USB kernel: [ 0.116529] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] May 5 18:39:08 wooper194-USB kernel: [ 0.116601] pci 0000:01:05.0: reg 10 io port: [0xe800-0xe8ff] May 5 18:39:08 wooper194-USB kernel: [ 0.116609] pci 0000:01:05.0: reg 14 32bit mmio: [0xfebffc00-0xfebffcff] May 5 18:39:08 wooper194-USB kernel: [ 0.116656] pci 0000:01:05.0: supports D1 D2 May 5 18:39:08 wooper194-USB kernel: [ 0.116659] pci 0000:01:05.0: PME# supported from D1 D2 D3hot D3cold May 5 18:39:08 wooper194-USB kernel: [ 0.116664] pci 0000:01:05.0: PME# disabled May 5 18:39:08 wooper194-USB kernel: [ 0.116707] pci 0000:00:1e.0: transparent bridge May 5 18:39:08 wooper194-USB kernel: [ 0.116712] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] May 5 18:39:08 wooper194-USB kernel: [ 0.116717] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] May 5 18:39:08 wooper194-USB kernel: [ 0.116730] pci_bus 0000:00: on NUMA node 0 May 5 18:39:08 wooper194-USB kernel: [ 0.116736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] May 5 18:39:08 wooper194-USB kernel: [ 0.116877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] May 5 18:39:08 wooper194-USB kernel: [ 0.126032] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) May 5 18:39:08 wooper194-USB kernel: [ 0.126169] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) May 5 18:39:08 wooper194-USB kernel: [ 0.126304] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) May 5 18:39:08 wooper194-USB kernel: [ 0.126442] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) May 5 18:39:08 wooper194-USB kernel: [ 0.126574] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) May 5 18:39:08 wooper194-USB kernel: [ 0.126707] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. May 5 18:39:08 wooper194-USB kernel: [ 0.126839] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. May 5 18:39:08 wooper194-USB kernel: [ 0.126972] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) May 5 18:39:08 wooper194-USB kernel: [ 0.127110] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none May 5 18:39:08 wooper194-USB kernel: [ 0.127120] vgaarb: loaded May 5 18:39:08 wooper194-USB kernel: [ 0.127269] SCSI subsystem initialized May 5 18:39:08 wooper194-USB kernel: [ 0.127356] libata version 3.00 loaded. May 5 18:39:08 wooper194-USB kernel: [ 0.127451] usbcore: registered new interface driver usbfs May 5 18:39:08 wooper194-USB kernel: [ 0.127465] usbcore: registered new interface driver hub May 5 18:39:08 wooper194-USB kernel: [ 0.127497] usbcore: registered new device driver usb May 5 18:39:08 wooper194-USB kernel: [ 0.127665] ACPI: WMI: Mapper loaded May 5 18:39:08 wooper194-USB kernel: [ 0.127667] PCI: Using ACPI for IRQ routing May 5 18:39:08 wooper194-USB kernel: [ 0.127824] NetLabel: Initializing May 5 18:39:08 wooper194-USB kernel: [ 0.127827] NetLabel: domain hash size = 128 May 5 18:39:08 wooper194-USB kernel: [ 0.127828] NetLabel: protocols = UNLABELED CIPSOv4 May 5 18:39:08 wooper194-USB kernel: [ 0.127842] NetLabel: unlabeled traffic allowed by default May 5 18:39:08 wooper194-USB kernel: [ 0.127886] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 May 5 18:39:08 wooper194-USB kernel: [ 0.127892] hpet0: 3 comparators, 64-bit 14.318180 MHz counter May 5 18:39:08 wooper194-USB kernel: [ 0.132018] Switching to clocksource tsc May 5 18:39:08 wooper194-USB kernel: [ 0.134388] AppArmor: AppArmor Filesystem Enabled May 5 18:39:08 wooper194-USB kernel: [ 0.134414] pnp: PnP ACPI init May 5 18:39:08 wooper194-USB kernel: [ 0.134438] ACPI: bus type pnp registered May 5 18:39:08 wooper194-USB kernel: [ 0.141257] pnp: PnP ACPI: found 17 devices May 5 18:39:08 wooper194-USB kernel: [ 0.141261] ACPI: ACPI bus type pnp unregistered May 5 18:39:08 wooper194-USB kernel: [ 0.141266] PnPBIOS: Disabled by ACPI PNP May 5 18:39:08 wooper194-USB kernel: [ 0.141283] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141293] system 00:06: ioport range 0x4d0-0x4d1 has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141297] system 00:06: ioport range 0x800-0x87f has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141300] system 00:06: ioport range 0x480-0x4bf has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141304] system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141308] system 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141315] system 00:09: iomem range 0xffc00000-0xfff7ffff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141322] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141325] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141333] system 00:0d: ioport range 0xa00-0xa0f has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141336] system 00:0d: ioport range 0xa10-0xa1f has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141339] system 00:0d: ioport range 0xa20-0xa2f has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141343] system 00:0d: ioport range 0xa30-0xa3f has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141349] system 00:0f: iomem range 0xe0000000-0xe3ffffff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141356] system 00:10: iomem range 0x0-0x9ffff could not be reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141360] system 00:10: iomem range 0xc0000-0xcffff could not be reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141363] system 00:10: iomem range 0xe0000-0xfffff could not be reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141367] system 00:10: iomem range 0x100000-0x3f7fffff could not be reserved May 5 18:39:08 wooper194-USB kernel: [ 0.176080] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 May 5 18:39:08 wooper194-USB kernel: [ 0.176084] pci 0000:00:1e.0: IO window: 0xe000-0xefff May 5 18:39:08 wooper194-USB kernel: [ 0.176090] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff May 5 18:39:08 wooper194-USB kernel: [ 0.176095] pci 0000:00:1e.0: PREFETCH window: disabled May 5 18:39:08 wooper194-USB kernel: [ 0.176110] pci 0000:00:1e.0: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 0.176115] pci_bus 0000:00: resource 0 io: [0x00-0xffff] May 5 18:39:08 wooper194-USB kernel: [ 0.176119] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] May 5 18:39:08 wooper194-USB kernel: [ 0.176122] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] May 5 18:39:08 wooper194-USB kernel: [ 0.176125] pci_bus 0000:01: resource 1 mem: [0xfeb00000-0xfebfffff] May 5 18:39:08 wooper194-USB kernel: [ 0.176129] pci_bus 0000:01: resource 3 io: [0x00-0xffff] May 5 18:39:08 wooper194-USB kernel: [ 0.176132] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] May 5 18:39:08 wooper194-USB kernel: [ 0.176172] NET: Registered protocol family 2 May 5 18:39:08 wooper194-USB kernel: [ 0.176276] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.176601] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.177280] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.177725] TCP: Hash tables configured (established 131072 bind 65536) May 5 18:39:08 wooper194-USB kernel: [ 0.177730] TCP reno registered May 5 18:39:08 wooper194-USB kernel: [ 0.177884] NET: Registered protocol family 1 May 5 18:39:08 wooper194-USB kernel: [ 0.177912] pci 0000:00:02.0: Boot video device May 5 18:39:08 wooper194-USB kernel: [ 0.178240] cpufreq-nforce2: No nForce2 chipset. May 5 18:39:08 wooper194-USB kernel: [ 0.178274] Scanning for low memory corruption every 60 seconds May 5 18:39:08 wooper194-USB kernel: [ 0.178398] audit: initializing netlink socket (disabled) May 5 18:39:08 wooper194-USB kernel: [ 0.178412] type=2000 audit(1273084738.175:1): initialized May 5 18:39:08 wooper194-USB kernel: [ 0.190852] Trying to unpack rootfs image as initramfs... May 5 18:39:08 wooper194-USB kernel: [ 0.204382] highmem bounce pool size: 64 pages May 5 18:39:08 wooper194-USB kernel: [ 0.204389] HugeTLB registered 4 MB page size, pre-allocated 0 pages May 5 18:39:08 wooper194-USB kernel: [ 0.212214] VFS: Disk quotas dquot_6.5.2 May 5 18:39:08 wooper194-USB kernel: [ 0.212320] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.213056] fuse init (API version 7.13) May 5 18:39:08 wooper194-USB kernel: [ 0.213166] msgmni has been set to 1716 May 5 18:39:08 wooper194-USB kernel: [ 0.213441] alg: No test for stdrng (krng) May 5 18:39:08 wooper194-USB kernel: [ 0.213521] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) May 5 18:39:08 wooper194-USB kernel: [ 0.213524] io scheduler noop registered May 5 18:39:08 wooper194-USB kernel: [ 0.213527] io scheduler anticipatory registered May 5 18:39:08 wooper194-USB kernel: [ 0.213529] io scheduler deadline registered May 5 18:39:08 wooper194-USB kernel: [ 0.213577] io scheduler cfq registered (default) May 5 18:39:08 wooper194-USB kernel: [ 0.213673] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 May 5 18:39:08 wooper194-USB kernel: [ 0.213701] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 May 5 18:39:08 wooper194-USB kernel: [ 0.213812] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 May 5 18:39:08 wooper194-USB kernel: [ 0.213821] ACPI: Power Button [PWRB] May 5 18:39:08 wooper194-USB kernel: [ 0.213873] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 May 5 18:39:08 wooper194-USB kernel: [ 0.213876] ACPI: Power Button [PWRF] May 5 18:39:08 wooper194-USB kernel: [ 0.214524] processor LNXCPU:00: registered as cooling_device0 May 5 18:39:08 wooper194-USB kernel: [ 0.225991] thermal LNXTHERM:01: registered as thermal_zone0 May 5 18:39:08 wooper194-USB kernel: [ 0.226002] ACPI: Thermal Zone [THRM] (40 C) May 5 18:39:08 wooper194-USB kernel: [ 0.229623] isapnp: Scanning for PnP cards... May 5 18:39:08 wooper194-USB kernel: [ 0.240483] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled May 5 18:39:08 wooper194-USB kernel: [ 0.240592] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A May 5 18:39:08 wooper194-USB kernel: [ 0.241226] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A May 5 18:39:08 wooper194-USB kernel: [ 0.242389] brd: module loaded May 5 18:39:08 wooper194-USB kernel: [ 0.242937] loop: module loaded May 5 18:39:08 wooper194-USB kernel: [ 0.243047] input: Macintosh mouse button emulation as /devices/virtual/input/input2 May 5 18:39:08 wooper194-USB kernel: [ 0.243176] ata_piix 0000:00:1f.1: version 2.13 May 5 18:39:08 wooper194-USB kernel: [ 0.243193] alloc irq_desc for 18 on node -1 May 5 18:39:08 wooper194-USB kernel: [ 0.243196] alloc kstat_irqs on node -1 May 5 18:39:08 wooper194-USB kernel: [ 0.243205] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 May 5 18:39:08 wooper194-USB kernel: [ 0.243245] ata_piix 0000:00:1f.1: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 0.243353] scsi0 : ata_piix May 5 18:39:08 wooper194-USB kernel: [ 0.292050] scsi1 : ata_piix May 5 18:39:08 wooper194-USB kernel: [ 0.293729] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 May 5 18:39:08 wooper194-USB kernel: [ 0.293733] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 May 5 18:39:08 wooper194-USB kernel: [ 0.293817] alloc irq_desc for 19 on node -1 May 5 18:39:08 wooper194-USB kernel: [ 0.293820] alloc kstat_irqs on node -1 May 5 18:39:08 wooper194-USB kernel: [ 0.293830] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 May 5 18:39:08 wooper194-USB kernel: [ 0.293836] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] May 5 18:39:08 wooper194-USB kernel: [ 0.293879] ata_piix 0000:00:1f.2: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 0.293966] scsi2 : ata_piix May 5 18:39:08 wooper194-USB kernel: [ 0.294167] scsi3 : ata_piix May 5 18:39:08 wooper194-USB kernel: [ 0.294217] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19 May 5 18:39:08 wooper194-USB kernel: [ 0.294220] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19 May 5 18:39:08 wooper194-USB kernel: [ 0.294604] Fixed MDIO Bus: probed May 5 18:39:08 wooper194-USB kernel: [ 0.294647] PPP generic driver version 2.4.2 May 5 18:39:08 wooper194-USB kernel: [ 0.294723] tun: Universal TUN/TAP device driver, 1.6 May 5 18:39:08 wooper194-USB kernel: [ 0.294725] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> May 5 18:39:08 wooper194-USB kernel: [ 0.294834] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver May 5 18:39:08 wooper194-USB kernel: [ 0.294860] alloc irq_desc for 23 on node -1 May 5 18:39:08 wooper194-USB kernel: [ 0.294862] alloc kstat_irqs on node -1 May 5 18:39:08 wooper194-USB kernel: [ 0.294869] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 May 5 18:39:08 wooper194-USB kernel: [ 0.294888] ehci_hcd 0000:00:1d.7: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 0.294891] ehci_hcd 0000:00:1d.7: EHCI Host Controller May 5 18:39:08 wooper194-USB kernel: [ 0.294937] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 May 5 18:39:08 wooper194-USB kernel: [ 0.294957] ehci_hcd 0000:00:1d.7: using broken periodic workaround May 5 18:39:08 wooper194-USB kernel: [ 0.294969] ehci_hcd 0000:00:1d.7: debug port 1 May 5 18:39:08 wooper194-USB kernel: [ 0.298852] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported May 5 18:39:08 wooper194-USB kernel: [ 0.298926] ata2: port disabled. ignoring. May 5 18:39:08 wooper194-USB kernel: [ 0.299131] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea37c00 May 5 18:39:08 wooper194-USB kernel: [ 0.312349] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 May 5 18:39:08 wooper194-USB kernel: [ 0.312514] usb usb1: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.312548] hub 1-0:1.0: USB hub found May 5 18:39:08 wooper194-USB kernel: [ 0.312560] hub 1-0:1.0: 8 ports detected May 5 18:39:08 wooper194-USB kernel: [ 0.312634] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver May 5 18:39:08 wooper194-USB kernel: [ 0.312652] uhci_hcd: USB Universal Host Controller Interface driver May 5 18:39:08 wooper194-USB kernel: [ 0.312706] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 May 5 18:39:08 wooper194-USB kernel: [ 0.312716] uhci_hcd 0000:00:1d.0: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 0.312720] uhci_hcd 0000:00:1d.0: UHCI Host Controller May 5 18:39:08 wooper194-USB kernel: [ 0.312774] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 May 5 18:39:08 wooper194-USB kernel: [ 0.312803] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880 May 5 18:39:08 wooper194-USB kernel: [ 0.312912] usb usb2: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.312944] hub 2-0:1.0: USB hub found May 5 18:39:08 wooper194-USB kernel: [ 0.312953] hub 2-0:1.0: 2 ports detected May 5 18:39:08 wooper194-USB kernel: [ 0.313005] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 May 5 18:39:08 wooper194-USB kernel: [ 0.313013] uhci_hcd 0000:00:1d.1: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 0.313017] uhci_hcd 0000:00:1d.1: UHCI Host Controller May 5 18:39:08 wooper194-USB kernel: [ 0.313063] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 May 5 18:39:08 wooper194-USB kernel: [ 0.313089] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 May 5 18:39:08 wooper194-USB kernel: [ 0.313194] usb usb3: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.313224] hub 3-0:1.0: USB hub found May 5 18:39:08 wooper194-USB kernel: [ 0.313233] hub 3-0:1.0: 2 ports detected May 5 18:39:08 wooper194-USB kernel: [ 0.313285] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 5 18:39:08 wooper194-USB kernel: [ 0.313293] uhci_hcd 0000:00:1d.2: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 0.313296] uhci_hcd 0000:00:1d.2: UHCI Host Controller May 5 18:39:08 wooper194-USB kernel: [ 0.313338] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 May 5 18:39:08 wooper194-USB kernel: [ 0.313373] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480 May 5 18:39:08 wooper194-USB kernel: [ 0.313479] usb usb4: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.313511] hub 4-0:1.0: USB hub found May 5 18:39:08 wooper194-USB kernel: [ 0.313519] hub 4-0:1.0: 2 ports detected May 5 18:39:08 wooper194-USB kernel: [ 0.313573] alloc irq_desc for 16 on node -1 May 5 18:39:08 wooper194-USB kernel: [ 0.313576] alloc kstat_irqs on node -1 May 5 18:39:08 wooper194-USB kernel: [ 0.313582] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 May 5 18:39:08 wooper194-USB kernel: [ 0.313591] uhci_hcd 0000:00:1d.3: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 0.313594] uhci_hcd 0000:00:1d.3: UHCI Host Controller May 5 18:39:08 wooper194-USB kernel: [ 0.313641] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 May 5 18:39:08 wooper194-USB kernel: [ 0.313675] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400 May 5 18:39:08 wooper194-USB kernel: [ 0.313789] usb usb5: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.313823] hub 5-0:1.0: USB hub found May 5 18:39:08 wooper194-USB kernel: [ 0.313830] hub 5-0:1.0: 2 ports detected May 5 18:39:08 wooper194-USB kernel: [ 0.313951] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 May 5 18:39:08 wooper194-USB kernel: [ 0.314307] serio: i8042 KBD port at 0x60,0x64 irq 1 May 5 18:39:08 wooper194-USB kernel: [ 0.314316] serio: i8042 AUX port at 0x60,0x64 irq 12 May 5 18:39:08 wooper194-USB kernel: [ 0.314464] mice: PS/2 mouse device common for all mice May 5 18:39:08 wooper194-USB kernel: [ 0.314603] rtc_cmos 00:03: RTC can wake from S4 May 5 18:39:08 wooper194-USB kernel: [ 0.314653] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 May 5 18:39:08 wooper194-USB kernel: [ 0.314682] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs May 5 18:39:08 wooper194-USB kernel: [ 0.314815] device-mapper: uevent: version 1.0.3 May 5 18:39:08 wooper194-USB kernel: [ 0.318276] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] May 5 18:39:08 wooper194-USB kernel: [ 0.318369] device-mapper: multipath: version 1.1.0 loaded May 5 18:39:08 wooper194-USB kernel: [ 0.318373] device-mapper: multipath round-robin: version 1.0.0 loaded May 5 18:39:08 wooper194-USB kernel: [ 0.319993] EISA: Probing bus 0 at eisa.0 May 5 18:39:08 wooper194-USB kernel: [ 0.320022] EISA: Detected 0 cards. May 5 18:39:08 wooper194-USB kernel: [ 0.321971] cpuidle: using governor ladder May 5 18:39:08 wooper194-USB kernel: [ 0.321975] cpuidle: using governor menu May 5 18:39:08 wooper194-USB kernel: [ 0.322462] TCP cubic registered May 5 18:39:08 wooper194-USB kernel: [ 0.322638] NET: Registered protocol family 10 May 5 18:39:08 wooper194-USB kernel: [ 0.323131] lo: Disabled Privacy Extensions May 5 18:39:08 wooper194-USB kernel: [ 0.323451] NET: Registered protocol family 17 May 5 18:39:08 wooper194-USB kernel: [ 0.323519] Using IPI No-Shortcut mode May 5 18:39:08 wooper194-USB kernel: [ 0.323632] PM: Resume from disk failed. May 5 18:39:08 wooper194-USB kernel: [ 0.323644] registered taskstats version 1 May 5 18:39:08 wooper194-USB kernel: [ 0.323867] Magic number: 10:857:644 May 5 18:39:08 wooper194-USB kernel: [ 0.323978] rtc_cmos 00:03: setting system clock to 2010-05-05 18:38:59 UTC (1273084739) May 5 18:39:08 wooper194-USB kernel: [ 0.323982] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found May 5 18:39:08 wooper194-USB kernel: [ 0.323984] EDD information not available. May 5 18:39:08 wooper194-USB kernel: [ 0.343763] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 May 5 18:39:08 wooper194-USB kernel: [ 0.491055] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.01, max UDMA/66 May 5 18:39:08 wooper194-USB kernel: [ 0.491202] ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133 May 5 18:39:08 wooper194-USB kernel: [ 0.491207] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) May 5 18:39:08 wooper194-USB kernel: [ 0.496303] ata1.00: configured for UDMA/66 May 5 18:39:08 wooper194-USB kernel: [ 0.504923] ata3.00: configured for UDMA/133 May 5 18:39:08 wooper194-USB kernel: [ 0.667634] usb 1-2: new high speed USB device using ehci_hcd and address 2 May 5 18:39:08 wooper194-USB kernel: [ 0.701174] Freeing initrd memory: 7629k freed May 5 18:39:08 wooper194-USB kernel: [ 0.835677] isapnp: No Plug & Play device found May 5 18:39:08 wooper194-USB kernel: [ 0.837181] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H58N 1.01 PQ: 0 ANSI: 5 May 5 18:39:08 wooper194-USB kernel: [ 0.841629] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray May 5 18:39:08 wooper194-USB kernel: [ 0.841635] Uniform CD-ROM driver Revision: 3.20 May 5 18:39:08 wooper194-USB kernel: [ 0.841788] sr 0:0:0:0: Attached scsi CD-ROM sr0 May 5 18:39:08 wooper194-USB kernel: [ 0.841879] sr 0:0:0:0: Attached scsi generic sg0 type 5 May 5 18:39:08 wooper194-USB kernel: [ 0.842079] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 May 5 18:39:08 wooper194-USB kernel: [ 0.842234] sd 2:0:0:0: Attached scsi generic sg1 type 0 May 5 18:39:08 wooper194-USB kernel: [ 0.842338] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) May 5 18:39:08 wooper194-USB kernel: [ 0.842397] sd 2:0:0:0: [sda] Write Protect is off May 5 18:39:08 wooper194-USB kernel: [ 0.842401] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 May 5 18:39:08 wooper194-USB kernel: [ 0.842431] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 5 18:39:08 wooper194-USB kernel: [ 0.842604] sda: May 5 18:39:08 wooper194-USB kernel: [ 0.856468] usb 1-2: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.867318] sda1 May 5 18:39:08 wooper194-USB kernel: [ 0.867654] sd 2:0:0:0: [sda] Attached SCSI disk May 5 18:39:08 wooper194-USB kernel: [ 0.867669] Freeing unused kernel memory: 656k freed May 5 18:39:08 wooper194-USB kernel: [ 0.867992] Write protecting the kernel text: 4676k May 5 18:39:08 wooper194-USB kernel: [ 0.868023] Write protecting the kernel read-only data: 1840k May 5 18:39:08 wooper194-USB kernel: [ 0.893984] udev: starting version 151 May 5 18:39:08 wooper194-USB kernel: [ 0.968095] usb 1-6: new high speed USB device using ehci_hcd and address 3 May 5 18:39:08 wooper194-USB kernel: [ 1.097950] usb 1-6: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 1.169742] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) May 5 18:39:08 wooper194-USB kernel: [ 1.169774] 8139cp 0000:01:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too May 5 18:39:08 wooper194-USB kernel: [ 1.187827] Initializing USB Mass Storage driver... May 5 18:39:08 wooper194-USB kernel: [ 1.192181] 8139too Fast Ethernet driver 0.9.28 May 5 18:39:08 wooper194-USB kernel: [ 1.192226] alloc irq_desc for 20 on node -1 May 5 18:39:08 wooper194-USB kernel: [ 1.192228] alloc kstat_irqs on node -1 May 5 18:39:08 wooper194-USB kernel: [ 1.192236] 8139too 0000:01:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 May 5 18:39:08 wooper194-USB kernel: [ 1.196429] eth0: RealTek RTL8139 at 0xe800, 00:1b:b9:cd:5c:af, IRQ 20 May 5 18:39:08 wooper194-USB kernel: [ 1.200613] scsi4 : SCSI emulation for USB Mass Storage devices May 5 18:39:08 wooper194-USB kernel: [ 1.200842] usbcore: registered new interface driver usb-storage May 5 18:39:08 wooper194-USB kernel: [ 1.200846] USB Mass Storage support registered. May 5 18:39:08 wooper194-USB kernel: [ 1.201479] usb-storage: device found at 3 May 5 18:39:08 wooper194-USB kernel: [ 1.201482] usb-storage: waiting for device to settle before scanning May 5 18:39:08 wooper194-USB kernel: [ 6.200155] usb-storage: device scan complete May 5 18:39:08 wooper194-USB kernel: [ 6.200916] scsi 4:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2 May 5 18:39:08 wooper194-USB kernel: [ 6.202267] sd 4:0:0:0: Attached scsi generic sg2 type 0 May 5 18:39:08 wooper194-USB kernel: [ 6.203146] sd 4:0:0:0: [sdb] 7897088 512-byte logical blocks: (4.04 GB/3.76 GiB) May 5 18:39:08 wooper194-USB kernel: [ 6.203770] sd 4:0:0:0: [sdb] Write Protect is off May 5 18:39:08 wooper194-USB kernel: [ 6.203775] sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00 May 5 18:39:08 wooper194-USB kernel: [ 6.203778] sd 4:0:0:0: [sdb] Assuming drive cache: write through May 5 18:39:08 wooper194-USB kernel: [ 6.206894] sd 4:0:0:0: [sdb] Assuming drive cache: write through May 5 18:39:08 wooper194-USB kernel: [ 6.206903] sdb: sdb1 sdb2 < sdb5 > May 5 18:39:08 wooper194-USB kernel: [ 6.483352] sd 4:0:0:0: [sdb] Assuming drive cache: write through May 5 18:39:08 wooper194-USB kernel: [ 6.483359] sd 4:0:0:0: [sdb] Attached SCSI removable disk May 5 18:39:08 wooper194-USB kernel: [ 6.552582] EXT4-fs (sdb1): mounted filesystem with ordered data mode May 5 18:39:08 wooper194-USB kernel: [ 7.024596] Adding 228344k swap on /dev/sdb5. Priority:-1 extents:1 across:228344k May 5 18:39:08 wooper194-USB kernel: [ 7.092343] udev: starting version 151 May 5 18:39:08 wooper194-USB kernel: [ 7.632492] Linux agpgart interface v0.103 May 5 18:39:08 wooper194-USB kernel: [ 7.699252] agpgart-intel 0000:00:00.0: Intel 945G Chipset May 5 18:39:08 wooper194-USB kernel: [ 7.699497] agpgart-intel 0000:00:00.0: detected 7932K stolen memory May 5 18:39:08 wooper194-USB kernel: [ 7.775708] intel_rng: FWH not detected May 5 18:39:08 wooper194-USB kernel: [ 7.830348] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 May 5 18:39:08 wooper194-USB kernel: [ 7.921585] psmouse serio1: ID: 10 00 64 May 5 18:39:08 wooper194-USB kernel: [ 8.018701] [drm] Initialized drm 1.1.0 20060810 May 5 18:39:08 wooper194-USB kernel: [ 8.102825] lp: driver loaded but no devices found May 5 18:39:08 wooper194-USB kernel: [ 8.225739] type=1505 audit(1273052347.400:2): operation="profile_load" pid=556 name="/sbin/dhclient3" May 5 18:39:08 wooper194-USB kernel: [ 8.226605] type=1505 audit(1273052347.400:3): operation="profile_load" pid=556 name="/usr/lib/NetworkManager/nm-dhcp-client.action" May 5 18:39:08 wooper194-USB kernel: [ 8.227065] type=1505 audit(1273052347.400:4): operation="profile_load" pid=556 name="/usr/lib/connman/scripts/dhclient-script" May 5 18:39:08 wooper194-USB kernel: [ 8.260628] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 5 18:39:08 wooper194-USB kernel: [ 8.260635] i915 0000:00:02.0: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 8.286190] [drm] set up 7M of stolen space May 5 18:39:08 wooper194-USB kernel: [ 8.287624] [drm] initialized overlay support May 5 18:39:08 wooper194-USB kernel: [ 8.465649] fb0: inteldrmfb frame buffer device May 5 18:39:08 wooper194-USB kernel: [ 8.465653] registered panic notifier May 5 18:39:08 wooper194-USB kernel: [ 8.465663] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 May 5 18:39:08 wooper194-USB kernel: [ 8.536656] vga16fb: initializing May 5 18:39:08 wooper194-USB kernel: [ 8.536663] vga16fb: mapped to 0xc00a0000 May 5 18:39:08 wooper194-USB kernel: [ 8.536668] vga16fb: not registering due to another framebuffer present May 5 18:39:08 wooper194-USB kernel: [ 8.606960] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 May 5 18:39:08 wooper194-USB kernel: [ 8.695035] Console: switching to colour frame buffer device 160x64 May 5 18:39:08 wooper194-USB kernel: [ 9.265862] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 5 18:39:08 wooper194-USB kernel: [ 9.265901] HDA Intel 0000:00:1b.0: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 9.473440] hda_codec: ALC883: BIOS auto-probing. May 5 18:39:08 wooper194-USB kernel: [ 9.475093] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 May 5 18:39:08 wooper194-USB kernel: [ 9.701597] type=1505 audit(1273052348.876:5): operation="profile_load" pid=714 name="/usr/share/gdm/guest-session/Xsession" May 5 18:39:08 wooper194-USB kernel: [ 9.710681] type=1505 audit(1273052348.884:6): operation="profile_replace" pid=715 name="/sbin/dhclient3" May 5 18:39:08 wooper194-USB kernel: [ 9.711559] type=1505 audit(1273052348.884:7): operation="profile_replace" pid=715 name="/usr/lib/NetworkManager/nm-dhcp-client.action" May 5 18:39:08 wooper194-USB kernel: [ 9.712397] type=1505 audit(1273052348.888:8): operation="profile_replace" pid=715 name="/usr/lib/connman/scripts/dhclient-script" May 5 18:39:09 wooper194-USB kernel: [ 10.028781] type=1505 audit(1273052349.204:9): operation="profile_load" pid=716 name="/usr/bin/evince" May 5 18:39:09 wooper194-USB kernel: [ 10.054055] eth0: link down May 5 18:39:09 wooper194-USB kernel: [ 10.054492] ADDRCONF(NETDEV_UP): eth0: link is not ready May 5 18:39:09 wooper194-USB kernel: [ 10.103380] type=1505 audit(1273052349.276:10): operation="profile_load" pid=716 name="/usr/bin/evince-previewer" May 5 18:39:09 wooper194-USB kernel: [ 10.158607] type=1505 audit(1273052349.332:11): operation="profile_load" pid=716 name="/usr/bin/evince-thumbnailer" May 5 18:39:10 wooper194-USB kernel: [ 11.112868] ppdev: user-space parallel port driver
オフライン
#7 2010-05-05 11:38:11
- wooper194
- メンバ
- From: Yokohama, Japan
- 登録日: 2010-04-30
Re: ログイン後、数秒~１分でフリーズする
messages
コード:
May 5 18:39:08 wooper194-USB kernel: imklog 4.2.0, log source = /proc/kmsg started. May 5 18:39:08 wooper194-USB rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="613" x-info="http://www.rsyslog.com"] (re)start May 5 18:39:08 wooper194-USB rsyslogd: rsyslogd's groupid changed to 103 May 5 18:39:08 wooper194-USB rsyslogd: rsyslogd's userid changed to 101 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Initializing cgroup subsys cpuset May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Initializing cgroup subsys cpu May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] KERNEL supported cpus: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Intel GenuineIntel May 5 18:39:08 wooper194-USB kernel: [ 0.000000] AMD AuthenticAMD May 5 18:39:08 wooper194-USB kernel: [ 0.000000] NSC Geode by NSC May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Cyrix CyrixInstead May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Centaur CentaurHauls May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Transmeta GenuineTMx86 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Transmeta TransmetaCPU May 5 18:39:08 wooper194-USB kernel: [ 0.000000] UMC UMC UMC UMC May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-provided physical RAM map: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7c0000 (usable) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 000000003f7c0000 - 000000003f7ce000 (ACPI data) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 000000003f7ce000 - 000000003f800000 (ACPI NVS) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] DMI present. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] last_pfn = 0x3f7c0 max_arch_pfn = 0x100000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Scanning 0 areas for low memory corruption May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified physical RAM map: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 0000000000100000 - 000000003f7c0000 (usable) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 000000003f7c0000 - 000000003f7ce000 (ACPI data) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 000000003f7ce000 - 000000003f800000 (ACPI NVS) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 00000000ffb80000 - 0000000100000000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Using x86 segment limits to approximate NX protection May 5 18:39:08 wooper194-USB kernel: [ 0.000000] RAMDISK: 2f29c000 - 2fa0f64e May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: RSDP 000fa2d0 00014 (v00 synnex) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: RSDT 3f7c0000 0003C (v01 Mouse Computer 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: FACP 3f7c0200 00084 (v02 Mouse OEMFACP 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: DSDT 3f7c05c0 04FA3 (v01 12345 12345123 00000000 INTL 20051117) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: FACS 3f7ce000 00040 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: APIC 3f7c0390 0006C (v01 Mouse OEMAPIC 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: MCFG 3f7c0400 0003C (v01 Mouse OEMMCFG 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: SLIC 3f7c0440 00176 (v01 Mouse Computer 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: OEMB 3f7ce040 00060 (v01 Mouse AMI_OEM 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: HPET 3f7c5570 00038 (v01 Mouse OEMHPET 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 127MB HIGHMEM available. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 887MB LOWMEM available. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] mapped low ram: 0 - 377fe000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] low ram: 0 - 377fe000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] node 0 low ram: 00000000 - 377fe000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] node 0 bootmap 00011000 - 00017f00 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #4 [002f29c000 - 002fa0f64e] RAMDISK ==> [002f29c000 - 002fa0f64e] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #6 [00008da000 - 00008dd12b] BRK ==> [00008da000 - 00008dd12b] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] found SMP MP-table at [c00ff780] ff780 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Zone PFN ranges: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Normal 0x00001000 -> 0x000377fe May 5 18:39:08 wooper194-USB kernel: [ 0.000000] HighMem 0x000377fe -> 0x0003f7c0 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Movable zone start PFN for each node May 5 18:39:08 wooper194-USB kernel: [ 0.000000] early_node_map[2] active PFN ranges May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 0: 0x00000100 -> 0x0003f7c0 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Using APIC driver default May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs May 5 18:39:08 wooper194-USB kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware May 5 18:39:08 wooper194-USB kernel: [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u1048576 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257887 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=5e9b7ea4-434a-4639-84d2-32a05de1cd0d ro quiet splash May 5 18:39:08 wooper194-USB kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Enabling fast FPU save and restore... done. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Initializing CPU#0 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] allocated 5200320 bytes of page_cgroup May 5 18:39:08 wooper194-USB kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f7c0) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Memory: 1008932k/1040128k available (4673k kernel code, 29956k reserved, 2122k data, 656k init, 130824k highmem) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] virtual kernel memory layout: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Hierarchical RCU implementation. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:440 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Console: colour VGA+ 80x25 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] console [tty0] enabled May 5 18:39:08 wooper194-USB kernel: [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Fast TSC calibration using PIT May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Detected 1596.310 MHz processor. May 5 18:39:08 wooper194-USB kernel: [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.62 BogoMIPS (lpj=6385240) May 5 18:39:08 wooper194-USB kernel: [ 0.004027] Security Framework initialized May 5 18:39:08 wooper194-USB kernel: [ 0.004052] AppArmor: AppArmor initialized May 5 18:39:08 wooper194-USB kernel: [ 0.004060] Mount-cache hash table entries: 512 May 5 18:39:08 wooper194-USB kernel: [ 0.004222] Initializing cgroup subsys ns May 5 18:39:08 wooper194-USB kernel: [ 0.004228] Initializing cgroup subsys cpuacct May 5 18:39:08 wooper194-USB kernel: [ 0.004234] Initializing cgroup subsys memory May 5 18:39:08 wooper194-USB kernel: [ 0.004243] Initializing cgroup subsys devices May 5 18:39:08 wooper194-USB kernel: [ 0.004246] Initializing cgroup subsys freezer May 5 18:39:08 wooper194-USB kernel: [ 0.004248] Initializing cgroup subsys net_cls May 5 18:39:08 wooper194-USB kernel: [ 0.004273] CPU: L1 I cache: 32K, L1 D cache: 32K May 5 18:39:08 wooper194-USB kernel: [ 0.004277] CPU: L2 cache: 512K May 5 18:39:08 wooper194-USB kernel: [ 0.004283] mce: CPU supports 6 MCE banks May 5 18:39:08 wooper194-USB kernel: [ 0.004293] CPU0: Thermal monitoring enabled (TM2) May 5 18:39:08 wooper194-USB kernel: [ 0.004298] using mwait in idle threads. May 5 18:39:08 wooper194-USB kernel: [ 0.004305] Performance Events: Core2 events, Intel PMU driver. May 5 18:39:08 wooper194-USB kernel: [ 0.004315] ... version: 2 May 5 18:39:08 wooper194-USB kernel: [ 0.004317] ... bit width: 40 May 5 18:39:08 wooper194-USB kernel: [ 0.004319] ... generic registers: 2 May 5 18:39:08 wooper194-USB kernel: [ 0.004322] ... value mask: 000000ffffffffff May 5 18:39:08 wooper194-USB kernel: [ 0.004324] ... max period: 000000007fffffff May 5 18:39:08 wooper194-USB kernel: [ 0.004327] ... fixed-purpose events: 3 May 5 18:39:08 wooper194-USB kernel: [ 0.004329] ... event mask: 0000000700000003 May 5 18:39:08 wooper194-USB kernel: [ 0.004335] Checking 'hlt' instruction... OK. May 5 18:39:08 wooper194-USB kernel: [ 0.021100] SMP alternatives: switching to UP code May 5 18:39:08 wooper194-USB kernel: [ 0.030669] ACPI: Core revision 20090903 May 5 18:39:08 wooper194-USB kernel: [ 0.040012] ftrace: converting mcount calls to 0f 1f 44 00 00 May 5 18:39:08 wooper194-USB kernel: [ 0.040019] ftrace: allocating 21771 entries in 43 pages May 5 18:39:08 wooper194-USB kernel: [ 0.044075] Enabling APIC mode: Flat. Using 1 I/O APICs May 5 18:39:08 wooper194-USB kernel: [ 0.044392] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 May 5 18:39:08 wooper194-USB kernel: [ 0.090139] CPU0: Intel(R) Celeron(R) CPU 420 @ 1.60GHz stepping 01 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] Brought up 1 CPUs May 5 18:39:08 wooper194-USB kernel: [ 0.092001] Total of 1 processors activated (3192.62 BogoMIPS). May 5 18:39:08 wooper194-USB kernel: [ 0.092001] devtmpfs: initialized May 5 18:39:08 wooper194-USB kernel: [ 0.092001] regulator: core version 0.5 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] Time: 18:38:59 Date: 05/05/10 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] NET: Registered protocol family 16 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] EISA bus registered May 5 18:39:08 wooper194-USB kernel: [ 0.092001] ACPI: bus type pci registered May 5 18:39:08 wooper194-USB kernel: [ 0.092001] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support. May 5 18:39:08 wooper194-USB kernel: [ 0.092001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] PCI: Not using MMCONFIG. May 5 18:39:08 wooper194-USB kernel: [ 0.092001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] PCI: Using configuration type 1 for base access May 5 18:39:08 wooper194-USB kernel: [ 0.092001] bio: create slab <bio-0> at 0 May 5 18:39:08 wooper194-USB kernel: [ 0.097373] ACPI: Executed 1 blocks of module-level executable AML code May 5 18:39:08 wooper194-USB kernel: [ 0.102832] ACPI: Interpreter enabled May 5 18:39:08 wooper194-USB kernel: [ 0.102840] ACPI: (supports S0 S3 S4 S5) May 5 18:39:08 wooper194-USB kernel: [ 0.102866] ACPI: Using IOAPIC for interrupt routing May 5 18:39:08 wooper194-USB kernel: [ 0.115279] ACPI Warning: Incorrect checksum in table [OEMB] - FF, should be FE (20090903/tbutils-314) May 5 18:39:08 wooper194-USB kernel: [ 0.115415] ACPI: No dock devices found. May 5 18:39:08 wooper194-USB kernel: [ 0.115565] ACPI: PCI Root Bridge [PCI0] (0000:00) May 5 18:39:08 wooper194-USB kernel: [ 0.115817] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold May 5 18:39:08 wooper194-USB kernel: [ 0.115822] pci 0000:00:1b.0: PME# disabled May 5 18:39:08 wooper194-USB kernel: [ 0.116152] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold May 5 18:39:08 wooper194-USB kernel: [ 0.116158] pci 0000:00:1d.7: PME# disabled May 5 18:39:08 wooper194-USB kernel: [ 0.116291] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO May 5 18:39:08 wooper194-USB kernel: [ 0.116296] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO May 5 18:39:08 wooper194-USB kernel: [ 0.116300] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) May 5 18:39:08 wooper194-USB kernel: [ 0.116476] pci 0000:00:1f.2: PME# supported from D3hot May 5 18:39:08 wooper194-USB kernel: [ 0.116480] pci 0000:00:1f.2: PME# disabled May 5 18:39:08 wooper194-USB kernel: [ 0.116659] pci 0000:01:05.0: PME# supported from D1 D2 D3hot D3cold May 5 18:39:08 wooper194-USB kernel: [ 0.116664] pci 0000:01:05.0: PME# disabled May 5 18:39:08 wooper194-USB kernel: [ 0.116707] pci 0000:00:1e.0: transparent bridge May 5 18:39:08 wooper194-USB kernel: [ 0.126032] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) May 5 18:39:08 wooper194-USB kernel: [ 0.126169] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) May 5 18:39:08 wooper194-USB kernel: [ 0.126304] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) May 5 18:39:08 wooper194-USB kernel: [ 0.126442] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) May 5 18:39:08 wooper194-USB kernel: [ 0.126574] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) May 5 18:39:08 wooper194-USB kernel: [ 0.126707] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. May 5 18:39:08 wooper194-USB kernel: [ 0.126839] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. May 5 18:39:08 wooper194-USB kernel: [ 0.126972] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) May 5 18:39:08 wooper194-USB kernel: [ 0.127110] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none May 5 18:39:08 wooper194-USB kernel: [ 0.127120] vgaarb: loaded May 5 18:39:08 wooper194-USB kernel: [ 0.127269] SCSI subsystem initialized May 5 18:39:08 wooper194-USB kernel: [ 0.127451] usbcore: registered new interface driver usbfs May 5 18:39:08 wooper194-USB kernel: [ 0.127465] usbcore: registered new interface driver hub May 5 18:39:08 wooper194-USB kernel: [ 0.127497] usbcore: registered new device driver usb May 5 18:39:08 wooper194-USB kernel: [ 0.127665] ACPI: WMI: Mapper loaded May 5 18:39:08 wooper194-USB kernel: [ 0.127667] PCI: Using ACPI for IRQ routing May 5 18:39:08 wooper194-USB kernel: [ 0.127824] NetLabel: Initializing May 5 18:39:08 wooper194-USB kernel: [ 0.127827] NetLabel: domain hash size = 128 May 5 18:39:08 wooper194-USB kernel: [ 0.127828] NetLabel: protocols = UNLABELED CIPSOv4 May 5 18:39:08 wooper194-USB kernel: [ 0.127842] NetLabel: unlabeled traffic allowed by default May 5 18:39:08 wooper194-USB kernel: [ 0.127886] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 May 5 18:39:08 wooper194-USB kernel: [ 0.127892] hpet0: 3 comparators, 64-bit 14.318180 MHz counter May 5 18:39:08 wooper194-USB kernel: [ 0.132018] Switching to clocksource tsc May 5 18:39:08 wooper194-USB kernel: [ 0.134388] AppArmor: AppArmor Filesystem Enabled May 5 18:39:08 wooper194-USB kernel: [ 0.134414] pnp: PnP ACPI init May 5 18:39:08 wooper194-USB kernel: [ 0.134438] ACPI: bus type pnp registered May 5 18:39:08 wooper194-USB kernel: [ 0.141257] pnp: PnP ACPI: found 17 devices May 5 18:39:08 wooper194-USB kernel: [ 0.141261] ACPI: ACPI bus type pnp unregistered May 5 18:39:08 wooper194-USB kernel: [ 0.141266] PnPBIOS: Disabled by ACPI PNP May 5 18:39:08 wooper194-USB kernel: [ 0.141283] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141293] system 00:06: ioport range 0x4d0-0x4d1 has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141297] system 00:06: ioport range 0x800-0x87f has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141300] system 00:06: ioport range 0x480-0x4bf has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141304] system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141308] system 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141315] system 00:09: iomem range 0xffc00000-0xfff7ffff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141322] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141325] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141333] system 00:0d: ioport range 0xa00-0xa0f has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141336] system 00:0d: ioport range 0xa10-0xa1f has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141339] system 00:0d: ioport range 0xa20-0xa2f has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141343] system 00:0d: ioport range 0xa30-0xa3f has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141349] system 00:0f: iomem range 0xe0000000-0xe3ffffff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141356] system 00:10: iomem range 0x0-0x9ffff could not be reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141360] system 00:10: iomem range 0xc0000-0xcffff could not be reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141363] system 00:10: iomem range 0xe0000-0xfffff could not be reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141367] system 00:10: iomem range 0x100000-0x3f7fffff could not be reserved May 5 18:39:08 wooper194-USB kernel: [ 0.176080] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 May 5 18:39:08 wooper194-USB kernel: [ 0.176084] pci 0000:00:1e.0: IO window: 0xe000-0xefff May 5 18:39:08 wooper194-USB kernel: [ 0.176090] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff May 5 18:39:08 wooper194-USB kernel: [ 0.176095] pci 0000:00:1e.0: PREFETCH window: disabled May 5 18:39:08 wooper194-USB kernel: [ 0.176172] NET: Registered protocol family 2 May 5 18:39:08 wooper194-USB kernel: [ 0.176276] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.176601] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.177280] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.177725] TCP: Hash tables configured (established 131072 bind 65536) May 5 18:39:08 wooper194-USB kernel: [ 0.177730] TCP reno registered May 5 18:39:08 wooper194-USB kernel: [ 0.177884] NET: Registered protocol family 1 May 5 18:39:08 wooper194-USB kernel: [ 0.178240] cpufreq-nforce2: No nForce2 chipset. May 5 18:39:08 wooper194-USB kernel: [ 0.178274] Scanning for low memory corruption every 60 seconds May 5 18:39:08 wooper194-USB kernel: [ 0.178398] audit: initializing netlink socket (disabled) May 5 18:39:08 wooper194-USB kernel: [ 0.178412] type=2000 audit(1273084738.175:1): initialized May 5 18:39:08 wooper194-USB kernel: [ 0.190852] Trying to unpack rootfs image as initramfs... May 5 18:39:08 wooper194-USB kernel: [ 0.204382] highmem bounce pool size: 64 pages May 5 18:39:08 wooper194-USB kernel: [ 0.204389] HugeTLB registered 4 MB page size, pre-allocated 0 pages May 5 18:39:08 wooper194-USB kernel: [ 0.212214] VFS: Disk quotas dquot_6.5.2 May 5 18:39:08 wooper194-USB kernel: [ 0.212320] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.213056] fuse init (API version 7.13) May 5 18:39:08 wooper194-USB kernel: [ 0.213166] msgmni has been set to 1716 May 5 18:39:08 wooper194-USB kernel: [ 0.213441] alg: No test for stdrng (krng) May 5 18:39:08 wooper194-USB kernel: [ 0.213521] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) May 5 18:39:08 wooper194-USB kernel: [ 0.213524] io scheduler noop registered May 5 18:39:08 wooper194-USB kernel: [ 0.213527] io scheduler anticipatory registered May 5 18:39:08 wooper194-USB kernel: [ 0.213529] io scheduler deadline registered May 5 18:39:08 wooper194-USB kernel: [ 0.213577] io scheduler cfq registered (default) May 5 18:39:08 wooper194-USB kernel: [ 0.213673] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 May 5 18:39:08 wooper194-USB kernel: [ 0.213701] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 May 5 18:39:08 wooper194-USB kernel: [ 0.213812] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 May 5 18:39:08 wooper194-USB kernel: [ 0.213821] ACPI: Power Button [PWRB] May 5 18:39:08 wooper194-USB kernel: [ 0.213873] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 May 5 18:39:08 wooper194-USB kernel: [ 0.213876] ACPI: Power Button [PWRF] May 5 18:39:08 wooper194-USB kernel: [ 0.214524] processor LNXCPU:00: registered as cooling_device0 May 5 18:39:08 wooper194-USB kernel: [ 0.225991] thermal LNXTHERM:01: registered as thermal_zone0 May 5 18:39:08 wooper194-USB kernel: [ 0.226002] ACPI: Thermal Zone [THRM] (40 C) May 5 18:39:08 wooper194-USB kernel: [ 0.229623] isapnp: Scanning for PnP cards... May 5 18:39:08 wooper194-USB kernel: [ 0.240483] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled May 5 18:39:08 wooper194-USB kernel: [ 0.240592] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A May 5 18:39:08 wooper194-USB kernel: [ 0.241226] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A May 5 18:39:08 wooper194-USB kernel: [ 0.242389] brd: module loaded May 5 18:39:08 wooper194-USB kernel: [ 0.242937] loop: module loaded May 5 18:39:08 wooper194-USB kernel: [ 0.243047] input: Macintosh mouse button emulation as /devices/virtual/input/input2 May 5 18:39:08 wooper194-USB kernel: [ 0.243205] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 May 5 18:39:08 wooper194-USB kernel: [ 0.243353] scsi0 : ata_piix May 5 18:39:08 wooper194-USB kernel: [ 0.292050] scsi1 : ata_piix May 5 18:39:08 wooper194-USB kernel: [ 0.293729] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 May 5 18:39:08 wooper194-USB kernel: [ 0.293733] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 May 5 18:39:08 wooper194-USB kernel: [ 0.293830] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 May 5 18:39:08 wooper194-USB kernel: [ 0.293836] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] May 5 18:39:08 wooper194-USB kernel: [ 0.293966] scsi2 : ata_piix May 5 18:39:08 wooper194-USB kernel: [ 0.294167] scsi3 : ata_piix May 5 18:39:08 wooper194-USB kernel: [ 0.294217] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19 May 5 18:39:08 wooper194-USB kernel: [ 0.294220] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19 May 5 18:39:08 wooper194-USB kernel: [ 0.294604] Fixed MDIO Bus: probed May 5 18:39:08 wooper194-USB kernel: [ 0.294647] PPP generic driver version 2.4.2 May 5 18:39:08 wooper194-USB kernel: [ 0.294723] tun: Universal TUN/TAP device driver, 1.6 May 5 18:39:08 wooper194-USB kernel: [ 0.294725] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> May 5 18:39:08 wooper194-USB kernel: [ 0.294834] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver May 5 18:39:08 wooper194-USB kernel: [ 0.294869] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 May 5 18:39:08 wooper194-USB kernel: [ 0.294891] ehci_hcd 0000:00:1d.7: EHCI Host Controller May 5 18:39:08 wooper194-USB kernel: [ 0.294937] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 May 5 18:39:08 wooper194-USB kernel: [ 0.294957] ehci_hcd 0000:00:1d.7: using broken periodic workaround May 5 18:39:08 wooper194-USB kernel: [ 0.294969] ehci_hcd 0000:00:1d.7: debug port 1 May 5 18:39:08 wooper194-USB kernel: [ 0.299131] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea37c00 May 5 18:39:08 wooper194-USB kernel: [ 0.312349] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 May 5 18:39:08 wooper194-USB kernel: [ 0.312514] usb usb1: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.312548] hub 1-0:1.0: USB hub found May 5 18:39:08 wooper194-USB kernel: [ 0.312560] hub 1-0:1.0: 8 ports detected May 5 18:39:08 wooper194-USB kernel: [ 0.312634] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver May 5 18:39:08 wooper194-USB kernel: [ 0.312652] uhci_hcd: USB Universal Host Controller Interface driver May 5 18:39:08 wooper194-USB kernel: [ 0.312706] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 May 5 18:39:08 wooper194-USB kernel: [ 0.312720] uhci_hcd 0000:00:1d.0: UHCI Host Controller May 5 18:39:08 wooper194-USB kernel: [ 0.312774] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 May 5 18:39:08 wooper194-USB kernel: [ 0.312803] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880 May 5 18:39:08 wooper194-USB kernel: [ 0.312912] usb usb2: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.312944] hub 2-0:1.0: USB hub found May 5 18:39:08 wooper194-USB kernel: [ 0.312953] hub 2-0:1.0: 2 ports detected May 5 18:39:08 wooper194-USB kernel: [ 0.313005] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 May 5 18:39:08 wooper194-USB kernel: [ 0.313017] uhci_hcd 0000:00:1d.1: UHCI Host Controller May 5 18:39:08 wooper194-USB kernel: [ 0.313063] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 May 5 18:39:08 wooper194-USB kernel: [ 0.313089] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 May 5 18:39:08 wooper194-USB kernel: [ 0.313194] usb usb3: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.313224] hub 3-0:1.0: USB hub found May 5 18:39:08 wooper194-USB kernel: [ 0.313233] hub 3-0:1.0: 2 ports detected May 5 18:39:08 wooper194-USB kernel: [ 0.313285] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 5 18:39:08 wooper194-USB kernel: [ 0.313296] uhci_hcd 0000:00:1d.2: UHCI Host Controller May 5 18:39:08 wooper194-USB kernel: [ 0.313338] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 May 5 18:39:08 wooper194-USB kernel: [ 0.313373] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480 May 5 18:39:08 wooper194-USB kernel: [ 0.313479] usb usb4: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.313511] hub 4-0:1.0: USB hub found May 5 18:39:08 wooper194-USB kernel: [ 0.313519] hub 4-0:1.0: 2 ports detected May 5 18:39:08 wooper194-USB kernel: [ 0.313582] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 May 5 18:39:08 wooper194-USB kernel: [ 0.313594] uhci_hcd 0000:00:1d.3: UHCI Host Controller May 5 18:39:08 wooper194-USB kernel: [ 0.313641] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 May 5 18:39:08 wooper194-USB kernel: [ 0.313675] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400 May 5 18:39:08 wooper194-USB kernel: [ 0.313789] usb usb5: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.313823] hub 5-0:1.0: USB hub found May 5 18:39:08 wooper194-USB kernel: [ 0.313830] hub 5-0:1.0: 2 ports detected May 5 18:39:08 wooper194-USB kernel: [ 0.313951] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 May 5 18:39:08 wooper194-USB kernel: [ 0.314307] serio: i8042 KBD port at 0x60,0x64 irq 1 May 5 18:39:08 wooper194-USB kernel: [ 0.314316] serio: i8042 AUX port at 0x60,0x64 irq 12 May 5 18:39:08 wooper194-USB kernel: [ 0.314464] mice: PS/2 mouse device common for all mice May 5 18:39:08 wooper194-USB kernel: [ 0.314603] rtc_cmos 00:03: RTC can wake from S4 May 5 18:39:08 wooper194-USB kernel: [ 0.314653] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 May 5 18:39:08 wooper194-USB kernel: [ 0.314682] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs May 5 18:39:08 wooper194-USB kernel: [ 0.314815] device-mapper: uevent: version 1.0.3 May 5 18:39:08 wooper194-USB kernel: [ 0.318276] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] May 5 18:39:08 wooper194-USB kernel: [ 0.318369] device-mapper: multipath: version 1.1.0 loaded May 5 18:39:08 wooper194-USB kernel: [ 0.318373] device-mapper: multipath round-robin: version 1.0.0 loaded May 5 18:39:08 wooper194-USB kernel: [ 0.319993] EISA: Probing bus 0 at eisa.0 May 5 18:39:08 wooper194-USB kernel: [ 0.320022] EISA: Detected 0 cards. May 5 18:39:08 wooper194-USB kernel: [ 0.321971] cpuidle: using governor ladder May 5 18:39:08 wooper194-USB kernel: [ 0.321975] cpuidle: using governor menu May 5 18:39:08 wooper194-USB kernel: [ 0.322462] TCP cubic registered May 5 18:39:08 wooper194-USB kernel: [ 0.322638] NET: Registered protocol family 10 May 5 18:39:08 wooper194-USB kernel: [ 0.323131] lo: Disabled Privacy Extensions May 5 18:39:08 wooper194-USB kernel: [ 0.323451] NET: Registered protocol family 17 May 5 18:39:08 wooper194-USB kernel: [ 0.323519] Using IPI No-Shortcut mode May 5 18:39:08 wooper194-USB kernel: [ 0.323644] registered taskstats version 1 May 5 18:39:08 wooper194-USB kernel: [ 0.323867] Magic number: 10:857:644 May 5 18:39:08 wooper194-USB kernel: [ 0.323978] rtc_cmos 00:03: setting system clock to 2010-05-05 18:38:59 UTC (1273084739) May 5 18:39:08 wooper194-USB kernel: [ 0.323982] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found May 5 18:39:08 wooper194-USB kernel: [ 0.323984] EDD information not available. May 5 18:39:08 wooper194-USB kernel: [ 0.343763] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 May 5 18:39:08 wooper194-USB kernel: [ 0.491055] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.01, max UDMA/66 May 5 18:39:08 wooper194-USB kernel: [ 0.491202] ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133 May 5 18:39:08 wooper194-USB kernel: [ 0.491207] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) May 5 18:39:08 wooper194-USB kernel: [ 0.496303] ata1.00: configured for UDMA/66 May 5 18:39:08 wooper194-USB kernel: [ 0.504923] ata3.00: configured for UDMA/133 May 5 18:39:08 wooper194-USB kernel: [ 0.667634] usb 1-2: new high speed USB device using ehci_hcd and address 2 May 5 18:39:08 wooper194-USB kernel: [ 0.701174] Freeing initrd memory: 7629k freed May 5 18:39:08 wooper194-USB kernel: [ 0.835677] isapnp: No Plug & Play device found May 5 18:39:08 wooper194-USB kernel: [ 0.837181] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H58N 1.01 PQ: 0 ANSI: 5 May 5 18:39:08 wooper194-USB kernel: [ 0.841629] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray May 5 18:39:08 wooper194-USB kernel: [ 0.841635] Uniform CD-ROM driver Revision: 3.20 May 5 18:39:08 wooper194-USB kernel: [ 0.841879] sr 0:0:0:0: Attached scsi generic sg0 type 5 May 5 18:39:08 wooper194-USB kernel: [ 0.842079] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 May 5 18:39:08 wooper194-USB kernel: [ 0.842234] sd 2:0:0:0: Attached scsi generic sg1 type 0 May 5 18:39:08 wooper194-USB kernel: [ 0.842338] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) May 5 18:39:08 wooper194-USB kernel: [ 0.842397] sd 2:0:0:0: [sda] Write Protect is off May 5 18:39:08 wooper194-USB kernel: [ 0.842431] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 5 18:39:08 wooper194-USB kernel: [ 0.842604] sda: May 5 18:39:08 wooper194-USB kernel: [ 0.856468] usb 1-2: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.867318] sda1 May 5 18:39:08 wooper194-USB kernel: [ 0.867654] sd 2:0:0:0: [sda] Attached SCSI disk May 5 18:39:08 wooper194-USB kernel: [ 0.867669] Freeing unused kernel memory: 656k freed May 5 18:39:08 wooper194-USB kernel: [ 0.867992] Write protecting the kernel text: 4676k May 5 18:39:08 wooper194-USB kernel: [ 0.868023] Write protecting the kernel read-only data: 1840k May 5 18:39:08 wooper194-USB kernel: [ 0.893984] udev: starting version 151 May 5 18:39:08 wooper194-USB kernel: [ 0.968095] usb 1-6: new high speed USB device using ehci_hcd and address 3 May 5 18:39:08 wooper194-USB kernel: [ 1.097950] usb 1-6: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 1.169742] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) May 5 18:39:08 wooper194-USB kernel: [ 1.169774] 8139cp 0000:01:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too May 5 18:39:08 wooper194-USB kernel: [ 1.187827] Initializing USB Mass Storage driver... May 5 18:39:08 wooper194-USB kernel: [ 1.192181] 8139too Fast Ethernet driver 0.9.28 May 5 18:39:08 wooper194-USB kernel: [ 1.192236] 8139too 0000:01:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 May 5 18:39:08 wooper194-USB kernel: [ 1.196429] eth0: RealTek RTL8139 at 0xe800, 00:1b:b9:cd:5c:af, IRQ 20 May 5 18:39:08 wooper194-USB kernel: [ 1.200613] scsi4 : SCSI emulation for USB Mass Storage devices May 5 18:39:08 wooper194-USB kernel: [ 1.200842] usbcore: registered new interface driver usb-storage May 5 18:39:08 wooper194-USB kernel: [ 1.200846] USB Mass Storage support registered. May 5 18:39:08 wooper194-USB kernel: [ 6.200916] scsi 4:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2 May 5 18:39:08 wooper194-USB kernel: [ 6.202267] sd 4:0:0:0: Attached scsi generic sg2 type 0 May 5 18:39:08 wooper194-USB kernel: [ 6.203146] sd 4:0:0:0: [sdb] 7897088 512-byte logical blocks: (4.04 GB/3.76 GiB) May 5 18:39:08 wooper194-USB kernel: [ 6.203770] sd 4:0:0:0: [sdb] Write Protect is off May 5 18:39:08 wooper194-USB kernel: [ 6.206903] sdb: sdb1 sdb2 < sdb5 > May 5 18:39:08 wooper194-USB kernel: [ 6.483359] sd 4:0:0:0: [sdb] Attached SCSI removable disk May 5 18:39:08 wooper194-USB kernel: [ 6.552582] EXT4-fs (sdb1): mounted filesystem with ordered data mode May 5 18:39:08 wooper194-USB kernel: [ 7.024596] Adding 228344k swap on /dev/sdb5. Priority:-1 extents:1 across:228344k May 5 18:39:08 wooper194-USB kernel: [ 7.092343] udev: starting version 151 May 5 18:39:08 wooper194-USB kernel: [ 7.632492] Linux agpgart interface v0.103 May 5 18:39:08 wooper194-USB kernel: [ 7.699252] agpgart-intel 0000:00:00.0: Intel 945G Chipset May 5 18:39:08 wooper194-USB kernel: [ 7.699497] agpgart-intel 0000:00:00.0: detected 7932K stolen memory May 5 18:39:08 wooper194-USB kernel: [ 7.775708] intel_rng: FWH not detected May 5 18:39:08 wooper194-USB kernel: [ 7.830348] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 May 5 18:39:08 wooper194-USB kernel: [ 8.018701] [drm] Initialized drm 1.1.0 20060810 May 5 18:39:08 wooper194-USB kernel: [ 8.102825] lp: driver loaded but no devices found May 5 18:39:08 wooper194-USB kernel: [ 8.225739] type=1505 audit(1273052347.400:2): operation="profile_load" pid=556 name="/sbin/dhclient3" May 5 18:39:08 wooper194-USB kernel: [ 8.226605] type=1505 audit(1273052347.400:3): operation="profile_load" pid=556 name="/usr/lib/NetworkManager/nm-dhcp-client.action" May 5 18:39:08 wooper194-USB kernel: [ 8.227065] type=1505 audit(1273052347.400:4): operation="profile_load" pid=556 name="/usr/lib/connman/scripts/dhclient-script" May 5 18:39:08 wooper194-USB kernel: [ 8.260628] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 5 18:39:08 wooper194-USB kernel: [ 8.286190] [drm] set up 7M of stolen space May 5 18:39:08 wooper194-USB kernel: [ 8.287624] [drm] initialized overlay support May 5 18:39:08 wooper194-USB kernel: [ 8.465649] fb0: inteldrmfb frame buffer device May 5 18:39:08 wooper194-USB kernel: [ 8.465653] registered panic notifier May 5 18:39:08 wooper194-USB kernel: [ 8.465663] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 May 5 18:39:08 wooper194-USB kernel: [ 8.536663] vga16fb: mapped to 0xc00a0000 May 5 18:39:08 wooper194-USB kernel: [ 8.536668] vga16fb: not registering due to another framebuffer present May 5 18:39:08 wooper194-USB kernel: [ 8.606960] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 May 5 18:39:08 wooper194-USB kernel: [ 8.695035] Console: switching to colour frame buffer device 160x64 May 5 18:39:08 wooper194-USB kernel: [ 9.265862] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 5 18:39:08 wooper194-USB kernel: [ 9.473440] hda_codec: ALC883: BIOS auto-probing. May 5 18:39:08 wooper194-USB kernel: [ 9.475093] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 May 5 18:39:08 wooper194-USB kernel: [ 9.701597] type=1505 audit(1273052348.876:5): operation="profile_load" pid=714 name="/usr/share/gdm/guest-session/Xsession" May 5 18:39:08 wooper194-USB kernel: [ 9.710681] type=1505 audit(1273052348.884:6): operation="profile_replace" pid=715 name="/sbin/dhclient3" May 5 18:39:08 wooper194-USB kernel: [ 9.711559] type=1505 audit(1273052348.884:7): operation="profile_replace" pid=715 name="/usr/lib/NetworkManager/nm-dhcp-client.action" May 5 18:39:08 wooper194-USB kernel: [ 9.712397] type=1505 audit(1273052348.888:8): operation="profile_replace" pid=715 name="/usr/lib/connman/scripts/dhclient-script" May 5 18:39:09 wooper194-USB kernel: [ 10.028781] type=1505 audit(1273052349.204:9): operation="profile_load" pid=716 name="/usr/bin/evince" May 5 18:39:09 wooper194-USB kernel: [ 10.054055] eth0: link down May 5 18:39:09 wooper194-USB kernel: [ 10.054492] ADDRCONF(NETDEV_UP): eth0: link is not ready May 5 18:39:09 wooper194-USB kernel: [ 10.103380] type=1505 audit(1273052349.276:10): operation="profile_load" pid=716 name="/usr/bin/evince-previewer" May 5 18:39:09 wooper194-USB kernel: [ 10.158607] type=1505 audit(1273052349.332:11): operation="profile_load" pid=716 name="/usr/bin/evince-thumbnailer" May 5 18:39:10 wooper194-USB kernel: [ 11.112868] ppdev: user-space parallel port driver
オフライン
#8 2010-05-05 11:43:41
- wooper194
- メンバ
- From: Yokohama, Japan
- 登録日: 2010-04-30
Re: ログイン後、数秒~１分でフリーズする
65535文字を超えているので2つに分けます。
syslog
コード:
May 5 18:39:08 wooper194-USB kernel: imklog 4.2.0, log source = /proc/kmsg started. May 5 18:39:08 wooper194-USB rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="613" x-info="http://www.rsyslog.com"] (re)start May 5 18:39:08 wooper194-USB rsyslogd: rsyslogd's groupid changed to 103 May 5 18:39:08 wooper194-USB rsyslogd: rsyslogd's userid changed to 101 May 5 18:39:08 wooper194-USB rsyslogd-2039: Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Initializing cgroup subsys cpuset May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Initializing cgroup subsys cpu May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] KERNEL supported cpus: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Intel GenuineIntel May 5 18:39:08 wooper194-USB kernel: [ 0.000000] AMD AuthenticAMD May 5 18:39:08 wooper194-USB kernel: [ 0.000000] NSC Geode by NSC May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Cyrix CyrixInstead May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Centaur CentaurHauls May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Transmeta GenuineTMx86 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Transmeta TransmetaCPU May 5 18:39:08 wooper194-USB kernel: [ 0.000000] UMC UMC UMC UMC May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-provided physical RAM map: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7c0000 (usable) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 000000003f7c0000 - 000000003f7ce000 (ACPI data) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 000000003f7ce000 - 000000003f800000 (ACPI NVS) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] DMI present. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] last_pfn = 0x3f7c0 max_arch_pfn = 0x100000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] MTRR default type: uncachable May 5 18:39:08 wooper194-USB kernel: [ 0.000000] MTRR fixed ranges enabled: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 00000-9FFFF write-back May 5 18:39:08 wooper194-USB kernel: [ 0.000000] A0000-DFFFF uncachable May 5 18:39:08 wooper194-USB kernel: [ 0.000000] E0000-EFFFF write-through May 5 18:39:08 wooper194-USB kernel: [ 0.000000] F0000-FFFFF write-protect May 5 18:39:08 wooper194-USB kernel: [ 0.000000] MTRR variable ranges enabled: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 0 base 000000000 mask FC0000000 write-back May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 1 base 03F800000 mask FFF800000 uncachable May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 2 disabled May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 3 disabled May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 4 disabled May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 5 disabled May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 6 disabled May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 7 disabled May 5 18:39:08 wooper194-USB kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Scanning 0 areas for low memory corruption May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified physical RAM map: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 0000000000100000 - 000000003f7c0000 (usable) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 000000003f7c0000 - 000000003f7ce000 (ACPI data) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 000000003f7ce000 - 000000003f800000 (ACPI NVS) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] modified: 00000000ffb80000 - 0000000100000000 (reserved) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] initial memory mapped : 0 - 00c00000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Using x86 segment limits to approximate NX protection May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 0000000000 - 0000400000 page 4k May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 0000400000 - 0037400000 page 2M May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 0037400000 - 00377fe000 page 4k May 5 18:39:08 wooper194-USB kernel: [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] RAMDISK: 2f29c000 - 2fa0f64e May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: RSDP 000fa2d0 00014 (v00 synnex) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: RSDT 3f7c0000 0003C (v01 Mouse Computer 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: FACP 3f7c0200 00084 (v02 Mouse OEMFACP 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: DSDT 3f7c05c0 04FA3 (v01 12345 12345123 00000000 INTL 20051117) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: FACS 3f7ce000 00040 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: APIC 3f7c0390 0006C (v01 Mouse OEMAPIC 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: MCFG 3f7c0400 0003C (v01 Mouse OEMMCFG 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: SLIC 3f7c0440 00176 (v01 Mouse Computer 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: OEMB 3f7ce040 00060 (v01 Mouse AMI_OEM 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: HPET 3f7c5570 00038 (v01 Mouse OEMHPET 06000701 MSFT 00000097) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 127MB HIGHMEM available. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 887MB LOWMEM available. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] mapped low ram: 0 - 377fe000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] low ram: 0 - 377fe000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] node 0 low ram: 00000000 - 377fe000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] node 0 bootmap 00011000 - 00017f00 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #4 [002f29c000 - 002fa0f64e] RAMDISK ==> [002f29c000 - 002fa0f64e] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #6 [00008da000 - 00008dd12b] BRK ==> [00008da000 - 00008dd12b] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] May 5 18:39:08 wooper194-USB kernel: [ 0.000000] found SMP MP-table at [c00ff780] ff780 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Zone PFN ranges: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Normal 0x00001000 -> 0x000377fe May 5 18:39:08 wooper194-USB kernel: [ 0.000000] HighMem 0x000377fe -> 0x0003f7c0 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Movable zone start PFN for each node May 5 18:39:08 wooper194-USB kernel: [ 0.000000] early_node_map[2] active PFN ranges May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f May 5 18:39:08 wooper194-USB kernel: [ 0.000000] 0: 0x00000100 -> 0x0003f7c0 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] On node 0 totalpages: 259919 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001200 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] DMA zone: 32 pages used for memmap May 5 18:39:08 wooper194-USB kernel: [ 0.000000] DMA zone: 0 pages reserved May 5 18:39:08 wooper194-USB kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Normal zone: 1744 pages used for memmap May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] HighMem zone: 256 pages used for memmap May 5 18:39:08 wooper194-USB kernel: [ 0.000000] HighMem zone: 32450 pages, LIFO batch:7 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Using APIC driver default May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: IRQ0 used by override. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: IRQ2 used by override. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: IRQ9 used by override. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information May 5 18:39:08 wooper194-USB kernel: [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs May 5 18:39:08 wooper194-USB kernel: [ 0.000000] nr_irqs_gsi: 24 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Booting paravirtualized kernel on bare hardware May 5 18:39:08 wooper194-USB kernel: [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36024 r0 d21320 u1048576 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] pcpu-alloc: [0] 0 1 2 3 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257887 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=5e9b7ea4-434a-4639-84d2-32a05de1cd0d ro quiet splash May 5 18:39:08 wooper194-USB kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Enabling fast FPU save and restore... done. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Initializing CPU#0 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] allocated 5200320 bytes of page_cgroup May 5 18:39:08 wooper194-USB kernel: [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Initializing HighMem for node 0 (000377fe:0003f7c0) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Memory: 1008932k/1040128k available (4673k kernel code, 29956k reserved, 2122k data, 656k init, 130824k highmem) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] virtual kernel memory layout: May 5 18:39:08 wooper194-USB kernel: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB) May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Hierarchical RCU implementation. May 5 18:39:08 wooper194-USB kernel: [ 0.000000] NR_IRQS:2304 nr_irqs:440 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Console: colour VGA+ 80x25 May 5 18:39:08 wooper194-USB kernel: [ 0.000000] console [tty0] enabled May 5 18:39:08 wooper194-USB kernel: [ 0.000000] hpet clockevent registered May 5 18:39:08 wooper194-USB kernel: [ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Fast TSC calibration using PIT May 5 18:39:08 wooper194-USB kernel: [ 0.000000] Detected 1596.310 MHz processor. May 5 18:39:08 wooper194-USB kernel: [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.62 BogoMIPS (lpj=6385240) May 5 18:39:08 wooper194-USB kernel: [ 0.004027] Security Framework initialized May 5 18:39:08 wooper194-USB kernel: [ 0.004052] AppArmor: AppArmor initialized May 5 18:39:08 wooper194-USB kernel: [ 0.004060] Mount-cache hash table entries: 512 May 5 18:39:08 wooper194-USB kernel: [ 0.004222] Initializing cgroup subsys ns May 5 18:39:08 wooper194-USB kernel: [ 0.004228] Initializing cgroup subsys cpuacct May 5 18:39:08 wooper194-USB kernel: [ 0.004234] Initializing cgroup subsys memory May 5 18:39:08 wooper194-USB kernel: [ 0.004243] Initializing cgroup subsys devices May 5 18:39:08 wooper194-USB kernel: [ 0.004246] Initializing cgroup subsys freezer May 5 18:39:08 wooper194-USB kernel: [ 0.004248] Initializing cgroup subsys net_cls May 5 18:39:08 wooper194-USB kernel: [ 0.004273] CPU: L1 I cache: 32K, L1 D cache: 32K May 5 18:39:08 wooper194-USB kernel: [ 0.004277] CPU: L2 cache: 512K May 5 18:39:08 wooper194-USB kernel: [ 0.004283] mce: CPU supports 6 MCE banks May 5 18:39:08 wooper194-USB kernel: [ 0.004293] CPU0: Thermal monitoring enabled (TM2) May 5 18:39:08 wooper194-USB kernel: [ 0.004298] using mwait in idle threads. May 5 18:39:08 wooper194-USB kernel: [ 0.004305] Performance Events: Core2 events, Intel PMU driver. May 5 18:39:08 wooper194-USB kernel: [ 0.004315] ... version: 2 May 5 18:39:08 wooper194-USB kernel: [ 0.004317] ... bit width: 40 May 5 18:39:08 wooper194-USB kernel: [ 0.004319] ... generic registers: 2 May 5 18:39:08 wooper194-USB kernel: [ 0.004322] ... value mask: 000000ffffffffff May 5 18:39:08 wooper194-USB kernel: [ 0.004324] ... max period: 000000007fffffff May 5 18:39:08 wooper194-USB kernel: [ 0.004327] ... fixed-purpose events: 3 May 5 18:39:08 wooper194-USB kernel: [ 0.004329] ... event mask: 0000000700000003 May 5 18:39:08 wooper194-USB kernel: [ 0.004335] Checking 'hlt' instruction... OK. May 5 18:39:08 wooper194-USB kernel: [ 0.021100] SMP alternatives: switching to UP code May 5 18:39:08 wooper194-USB kernel: [ 0.030669] ACPI: Core revision 20090903 May 5 18:39:08 wooper194-USB kernel: [ 0.040012] ftrace: converting mcount calls to 0f 1f 44 00 00 May 5 18:39:08 wooper194-USB kernel: [ 0.040019] ftrace: allocating 21771 entries in 43 pages May 5 18:39:08 wooper194-USB kernel: [ 0.044075] Enabling APIC mode: Flat. Using 1 I/O APICs May 5 18:39:08 wooper194-USB kernel: [ 0.044392] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 May 5 18:39:08 wooper194-USB kernel: [ 0.090139] CPU0: Intel(R) Celeron(R) CPU 420 @ 1.60GHz stepping 01 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] Brought up 1 CPUs May 5 18:39:08 wooper194-USB kernel: [ 0.092001] Total of 1 processors activated (3192.62 BogoMIPS). May 5 18:39:08 wooper194-USB kernel: [ 0.092001] CPU0 attaching NULL sched-domain. May 5 18:39:08 wooper194-USB kernel: [ 0.092001] devtmpfs: initialized May 5 18:39:08 wooper194-USB kernel: [ 0.092001] regulator: core version 0.5 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] Time: 18:38:59 Date: 05/05/10 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] NET: Registered protocol family 16 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] EISA bus registered May 5 18:39:08 wooper194-USB kernel: [ 0.092001] ACPI: bus type pci registered May 5 18:39:08 wooper194-USB kernel: [ 0.092001] PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support. May 5 18:39:08 wooper194-USB kernel: [ 0.092001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] PCI: Not using MMCONFIG. May 5 18:39:08 wooper194-USB kernel: [ 0.092001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] PCI: Using configuration type 1 for base access May 5 18:39:08 wooper194-USB kernel: [ 0.092001] bio: create slab <bio-0> at 0 May 5 18:39:08 wooper194-USB kernel: [ 0.092001] ACPI: EC: Look up EC in DSDT May 5 18:39:08 wooper194-USB kernel: [ 0.097373] ACPI: Executed 1 blocks of module-level executable AML code May 5 18:39:08 wooper194-USB kernel: [ 0.102832] ACPI: Interpreter enabled May 5 18:39:08 wooper194-USB kernel: [ 0.102840] ACPI: (supports S0 S3 S4 S5) May 5 18:39:08 wooper194-USB kernel: [ 0.102866] ACPI: Using IOAPIC for interrupt routing May 5 18:39:08 wooper194-USB kernel: [ 0.115279] ACPI Warning: Incorrect checksum in table [OEMB] - FF, should be FE (20090903/tbutils-314) May 5 18:39:08 wooper194-USB kernel: [ 0.115415] ACPI: No dock devices found. May 5 18:39:08 wooper194-USB kernel: [ 0.115565] ACPI: PCI Root Bridge [PCI0] (0000:00) May 5 18:39:08 wooper194-USB kernel: [ 0.115666] pci 0000:00:02.0: reg 10 32bit mmio: [0xfea80000-0xfeafffff] May 5 18:39:08 wooper194-USB kernel: [ 0.115672] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07] May 5 18:39:08 wooper194-USB kernel: [ 0.115678] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff] May 5 18:39:08 wooper194-USB kernel: [ 0.115684] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfea40000-0xfea7ffff] May 5 18:39:08 wooper194-USB kernel: [ 0.115770] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfea38000-0xfea3bfff] May 5 18:39:08 wooper194-USB kernel: [ 0.115817] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold May 5 18:39:08 wooper194-USB kernel: [ 0.115822] pci 0000:00:1b.0: PME# disabled May 5 18:39:08 wooper194-USB kernel: [ 0.115868] pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f] May 5 18:39:08 wooper194-USB kernel: [ 0.115921] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f] May 5 18:39:08 wooper194-USB kernel: [ 0.115973] pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f] May 5 18:39:08 wooper194-USB kernel: [ 0.116039] pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f] May 5 18:39:08 wooper194-USB kernel: [ 0.116097] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfea37c00-0xfea37fff] May 5 18:39:08 wooper194-USB kernel: [ 0.116152] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold May 5 18:39:08 wooper194-USB kernel: [ 0.116158] pci 0000:00:1d.7: PME# disabled May 5 18:39:08 wooper194-USB kernel: [ 0.116291] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO May 5 18:39:08 wooper194-USB kernel: [ 0.116296] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO May 5 18:39:08 wooper194-USB kernel: [ 0.116300] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) May 5 18:39:08 wooper194-USB kernel: [ 0.116347] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] May 5 18:39:08 wooper194-USB kernel: [ 0.116354] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] May 5 18:39:08 wooper194-USB kernel: [ 0.116362] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] May 5 18:39:08 wooper194-USB kernel: [ 0.116369] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] May 5 18:39:08 wooper194-USB kernel: [ 0.116377] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] May 5 18:39:08 wooper194-USB kernel: [ 0.116422] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087] May 5 18:39:08 wooper194-USB kernel: [ 0.116429] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003] May 5 18:39:08 wooper194-USB kernel: [ 0.116435] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07] May 5 18:39:08 wooper194-USB kernel: [ 0.116442] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883] May 5 18:39:08 wooper194-USB kernel: [ 0.116449] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f] May 5 18:39:08 wooper194-USB kernel: [ 0.116476] pci 0000:00:1f.2: PME# supported from D3hot May 5 18:39:08 wooper194-USB kernel: [ 0.116480] pci 0000:00:1f.2: PME# disabled May 5 18:39:08 wooper194-USB kernel: [ 0.116529] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] May 5 18:39:08 wooper194-USB kernel: [ 0.116601] pci 0000:01:05.0: reg 10 io port: [0xe800-0xe8ff] May 5 18:39:08 wooper194-USB kernel: [ 0.116609] pci 0000:01:05.0: reg 14 32bit mmio: [0xfebffc00-0xfebffcff] May 5 18:39:08 wooper194-USB kernel: [ 0.116656] pci 0000:01:05.0: supports D1 D2 May 5 18:39:08 wooper194-USB kernel: [ 0.116659] pci 0000:01:05.0: PME# supported from D1 D2 D3hot D3cold May 5 18:39:08 wooper194-USB kernel: [ 0.116664] pci 0000:01:05.0: PME# disabled May 5 18:39:08 wooper194-USB kernel: [ 0.116707] pci 0000:00:1e.0: transparent bridge May 5 18:39:08 wooper194-USB kernel: [ 0.116712] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] May 5 18:39:08 wooper194-USB kernel: [ 0.116717] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] May 5 18:39:08 wooper194-USB kernel: [ 0.116730] pci_bus 0000:00: on NUMA node 0 May 5 18:39:08 wooper194-USB kernel: [ 0.116736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] May 5 18:39:08 wooper194-USB kernel: [ 0.116877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] May 5 18:39:08 wooper194-USB kernel: [ 0.126032] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) May 5 18:39:08 wooper194-USB kernel: [ 0.126169] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) May 5 18:39:08 wooper194-USB kernel: [ 0.126304] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) May 5 18:39:08 wooper194-USB kernel: [ 0.126442] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) May 5 18:39:08 wooper194-USB kernel: [ 0.126574] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15) May 5 18:39:08 wooper194-USB kernel: [ 0.126707] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. May 5 18:39:08 wooper194-USB kernel: [ 0.126839] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. May 5 18:39:08 wooper194-USB kernel: [ 0.126972] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) May 5 18:39:08 wooper194-USB kernel: [ 0.127110] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none May 5 18:39:08 wooper194-USB kernel: [ 0.127120] vgaarb: loaded May 5 18:39:08 wooper194-USB kernel: [ 0.127269] SCSI subsystem initialized May 5 18:39:08 wooper194-USB kernel: [ 0.127356] libata version 3.00 loaded. May 5 18:39:08 wooper194-USB kernel: [ 0.127451] usbcore: registered new interface driver usbfs May 5 18:39:08 wooper194-USB kernel: [ 0.127465] usbcore: registered new interface driver hub May 5 18:39:08 wooper194-USB kernel: [ 0.127497] usbcore: registered new device driver usb May 5 18:39:08 wooper194-USB kernel: [ 0.127665] ACPI: WMI: Mapper loaded May 5 18:39:08 wooper194-USB kernel: [ 0.127667] PCI: Using ACPI for IRQ routing May 5 18:39:08 wooper194-USB kernel: [ 0.127824] NetLabel: Initializing May 5 18:39:08 wooper194-USB kernel: [ 0.127827] NetLabel: domain hash size = 128 May 5 18:39:08 wooper194-USB kernel: [ 0.127828] NetLabel: protocols = UNLABELED CIPSOv4 May 5 18:39:08 wooper194-USB kernel: [ 0.127842] NetLabel: unlabeled traffic allowed by default May 5 18:39:08 wooper194-USB kernel: [ 0.127886] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 May 5 18:39:08 wooper194-USB kernel: [ 0.127892] hpet0: 3 comparators, 64-bit 14.318180 MHz counter May 5 18:39:08 wooper194-USB kernel: [ 0.132018] Switching to clocksource tsc May 5 18:39:08 wooper194-USB kernel: [ 0.134388] AppArmor: AppArmor Filesystem Enabled May 5 18:39:08 wooper194-USB kernel: [ 0.134414] pnp: PnP ACPI init May 5 18:39:08 wooper194-USB kernel: [ 0.134438] ACPI: bus type pnp registered May 5 18:39:08 wooper194-USB kernel: [ 0.141257] pnp: PnP ACPI: found 17 devices May 5 18:39:08 wooper194-USB kernel: [ 0.141261] ACPI: ACPI bus type pnp unregistered May 5 18:39:08 wooper194-USB kernel: [ 0.141266] PnPBIOS: Disabled by ACPI PNP May 5 18:39:08 wooper194-USB kernel: [ 0.141283] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141293] system 00:06: ioport range 0x4d0-0x4d1 has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141297] system 00:06: ioport range 0x800-0x87f has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141300] system 00:06: ioport range 0x480-0x4bf has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141304] system 00:06: iomem range 0xfed1c000-0xfed1ffff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141308] system 00:06: iomem range 0xfed20000-0xfed8ffff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141315] system 00:09: iomem range 0xffc00000-0xfff7ffff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141322] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141325] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141333] system 00:0d: ioport range 0xa00-0xa0f has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141336] system 00:0d: ioport range 0xa10-0xa1f has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141339] system 00:0d: ioport range 0xa20-0xa2f has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141343] system 00:0d: ioport range 0xa30-0xa3f has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141349] system 00:0f: iomem range 0xe0000000-0xe3ffffff has been reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141356] system 00:10: iomem range 0x0-0x9ffff could not be reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141360] system 00:10: iomem range 0xc0000-0xcffff could not be reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141363] system 00:10: iomem range 0xe0000-0xfffff could not be reserved May 5 18:39:08 wooper194-USB kernel: [ 0.141367] system 00:10: iomem range 0x100000-0x3f7fffff could not be reserved May 5 18:39:08 wooper194-USB kernel: [ 0.176080] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 May 5 18:39:08 wooper194-USB kernel: [ 0.176084] pci 0000:00:1e.0: IO window: 0xe000-0xefff May 5 18:39:08 wooper194-USB kernel: [ 0.176090] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff May 5 18:39:08 wooper194-USB kernel: [ 0.176095] pci 0000:00:1e.0: PREFETCH window: disabled May 5 18:39:08 wooper194-USB kernel: [ 0.176110] pci 0000:00:1e.0: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 0.176115] pci_bus 0000:00: resource 0 io: [0x00-0xffff] May 5 18:39:08 wooper194-USB kernel: [ 0.176119] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] May 5 18:39:08 wooper194-USB kernel: [ 0.176122] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] May 5 18:39:08 wooper194-USB kernel: [ 0.176125] pci_bus 0000:01: resource 1 mem: [0xfeb00000-0xfebfffff] May 5 18:39:08 wooper194-USB kernel: [ 0.176129] pci_bus 0000:01: resource 3 io: [0x00-0xffff] May 5 18:39:08 wooper194-USB kernel: [ 0.176132] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] May 5 18:39:08 wooper194-USB kernel: [ 0.176172] NET: Registered protocol family 2 May 5 18:39:08 wooper194-USB kernel: [ 0.176276] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.176601] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.177280] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.177725] TCP: Hash tables configured (established 131072 bind 65536) May 5 18:39:08 wooper194-USB kernel: [ 0.177730] TCP reno registered May 5 18:39:08 wooper194-USB kernel: [ 0.177884] NET: Registered protocol family 1 May 5 18:39:08 wooper194-USB kernel: [ 0.177912] pci 0000:00:02.0: Boot video device May 5 18:39:08 wooper194-USB kernel: [ 0.178240] cpufreq-nforce2: No nForce2 chipset. May 5 18:39:08 wooper194-USB kernel: [ 0.178274] Scanning for low memory corruption every 60 seconds May 5 18:39:08 wooper194-USB kernel: [ 0.178398] audit: initializing netlink socket (disabled) May 5 18:39:08 wooper194-USB kernel: [ 0.178412] type=2000 audit(1273084738.175:1): initialized May 5 18:39:08 wooper194-USB kernel: [ 0.190852] Trying to unpack rootfs image as initramfs... May 5 18:39:08 wooper194-USB kernel: [ 0.204382] highmem bounce pool size: 64 pages May 5 18:39:08 wooper194-USB kernel: [ 0.204389] HugeTLB registered 4 MB page size, pre-allocated 0 pages May 5 18:39:08 wooper194-USB kernel: [ 0.212214] VFS: Disk quotas dquot_6.5.2 May 5 18:39:08 wooper194-USB kernel: [ 0.212320] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) May 5 18:39:08 wooper194-USB kernel: [ 0.213056] fuse init (API version 7.13) May 5 18:39:08 wooper194-USB kernel: [ 0.213166] msgmni has been set to 1716 May 5 18:39:08 wooper194-USB kernel: [ 0.213441] alg: No test for stdrng (krng) May 5 18:39:08 wooper194-USB kernel: [ 0.213521] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) May 5 18:39:08 wooper194-USB kernel: [ 0.213524] io scheduler noop registered May 5 18:39:08 wooper194-USB kernel: [ 0.213527] io scheduler anticipatory registered May 5 18:39:08 wooper194-USB kernel: [ 0.213529] io scheduler deadline registered May 5 18:39:08 wooper194-USB kernel: [ 0.213577] io scheduler cfq registered (default) May 5 18:39:08 wooper194-USB kernel: [ 0.213673] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 May 5 18:39:08 wooper194-USB kernel: [ 0.213701] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 May 5 18:39:08 wooper194-USB kernel: [ 0.213812] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 May 5 18:39:08 wooper194-USB kernel: [ 0.213821] ACPI: Power Button [PWRB] May 5 18:39:08 wooper194-USB kernel: [ 0.213873] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 May 5 18:39:08 wooper194-USB kernel: [ 0.213876] ACPI: Power Button [PWRF] May 5 18:39:08 wooper194-USB kernel: [ 0.214524] processor LNXCPU:00: registered as cooling_device0 May 5 18:39:08 wooper194-USB kernel: [ 0.225991] thermal LNXTHERM:01: registered as thermal_zone0 May 5 18:39:08 wooper194-USB kernel: [ 0.226002] ACPI: Thermal Zone [THRM] (40 C) May 5 18:39:08 wooper194-USB kernel: [ 0.229623] isapnp: Scanning for PnP cards... May 5 18:39:08 wooper194-USB kernel: [ 0.240483] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled May 5 18:39:08 wooper194-USB kernel: [ 0.240592] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A May 5 18:39:08 wooper194-USB kernel: [ 0.241226] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A May 5 18:39:08 wooper194-USB kernel: [ 0.242389] brd: module loaded May 5 18:39:08 wooper194-USB kernel: [ 0.242937] loop: module loaded May 5 18:39:08 wooper194-USB kernel: [ 0.243047] input: Macintosh mouse button emulation as /devices/virtual/input/input2 May 5 18:39:08 wooper194-USB kernel: [ 0.243176] ata_piix 0000:00:1f.1: version 2.13 May 5 18:39:08 wooper194-USB kernel: [ 0.243193] alloc irq_desc for 18 on node -1 May 5 18:39:08 wooper194-USB kernel: [ 0.243196] alloc kstat_irqs on node -1 May 5 18:39:08 wooper194-USB kernel: [ 0.243205] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 May 5 18:39:08 wooper194-USB kernel: [ 0.243245] ata_piix 0000:00:1f.1: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 0.243353] scsi0 : ata_piix May 5 18:39:08 wooper194-USB kernel: [ 0.292050] scsi1 : ata_piix May 5 18:39:08 wooper194-USB kernel: [ 0.293729] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 May 5 18:39:08 wooper194-USB kernel: [ 0.293733] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 May 5 18:39:08 wooper194-USB kernel: [ 0.293817] alloc irq_desc for 19 on node -1 May 5 18:39:08 wooper194-USB kernel: [ 0.293820] alloc kstat_irqs on node -1 May 5 18:39:08 wooper194-USB kernel: [ 0.293830] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 May 5 18:39:08 wooper194-USB kernel: [ 0.293836] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] May 5 18:39:08 wooper194-USB kernel: [ 0.293879] ata_piix 0000:00:1f.2: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 0.293966] scsi2 : ata_piix May 5 18:39:08 wooper194-USB kernel: [ 0.294167] scsi3 : ata_piix May 5 18:39:08 wooper194-USB kernel: [ 0.294217] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19 May 5 18:39:08 wooper194-USB kernel: [ 0.294220] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19 May 5 18:39:08 wooper194-USB kernel: [ 0.294604] Fixed MDIO Bus: probed May 5 18:39:08 wooper194-USB kernel: [ 0.294647] PPP generic driver version 2.4.2 May 5 18:39:08 wooper194-USB kernel: [ 0.294723] tun: Universal TUN/TAP device driver, 1.6 May 5 18:39:08 wooper194-USB kernel: [ 0.294725] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> May 5 18:39:08 wooper194-USB kernel: [ 0.294834] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver May 5 18:39:08 wooper194-USB kernel: [ 0.294860] alloc irq_desc for 23 on node -1 May 5 18:39:08 wooper194-USB kernel: [ 0.294862] alloc kstat_irqs on node -1 May 5 18:39:08 wooper194-USB kernel: [ 0.294869] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 May 5 18:39:08 wooper194-USB kernel: [ 0.294888] ehci_hcd 0000:00:1d.7: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 0.294891] ehci_hcd 0000:00:1d.7: EHCI Host Controller May 5 18:39:08 wooper194-USB kernel: [ 0.294937] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 May 5 18:39:08 wooper194-USB kernel: [ 0.294957] ehci_hcd 0000:00:1d.7: using broken periodic workaround May 5 18:39:08 wooper194-USB kernel: [ 0.294969] ehci_hcd 0000:00:1d.7: debug port 1 May 5 18:39:08 wooper194-USB kernel: [ 0.298852] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported May 5 18:39:08 wooper194-USB kernel: [ 0.298926] ata2: port disabled. ignoring. May 5 18:39:08 wooper194-USB kernel: [ 0.299131] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea37c00 May 5 18:39:08 wooper194-USB kernel: [ 0.312349] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 May 5 18:39:08 wooper194-USB kernel: [ 0.312514] usb usb1: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.312548] hub 1-0:1.0: USB hub found May 5 18:39:08 wooper194-USB kernel: [ 0.312560] hub 1-0:1.0: 8 ports detected May 5 18:39:08 wooper194-USB kernel: [ 0.312634] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver May 5 18:39:08 wooper194-USB kernel: [ 0.312652] uhci_hcd: USB Universal Host Controller Interface driver May 5 18:39:08 wooper194-USB kernel: [ 0.312706] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 May 5 18:39:08 wooper194-USB kernel: [ 0.312716] uhci_hcd 0000:00:1d.0: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 0.312720] uhci_hcd 0000:00:1d.0: UHCI Host Controller May 5 18:39:08 wooper194-USB kernel: [ 0.312774] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 May 5 18:39:08 wooper194-USB kernel: [ 0.312803] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880 May 5 18:39:08 wooper194-USB kernel: [ 0.312912] usb usb2: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.312944] hub 2-0:1.0: USB hub found May 5 18:39:08 wooper194-USB kernel: [ 0.312953] hub 2-0:1.0: 2 ports detected May 5 18:39:08 wooper194-USB kernel: [ 0.313005] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 May 5 18:39:08 wooper194-USB kernel: [ 0.313013] uhci_hcd 0000:00:1d.1: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 0.313017] uhci_hcd 0000:00:1d.1: UHCI Host Controller May 5 18:39:08 wooper194-USB kernel: [ 0.313063] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 May 5 18:39:08 wooper194-USB kernel: [ 0.313089] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 May 5 18:39:08 wooper194-USB kernel: [ 0.313194] usb usb3: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.313224] hub 3-0:1.0: USB hub found May 5 18:39:08 wooper194-USB kernel: [ 0.313233] hub 3-0:1.0: 2 ports detected May 5 18:39:08 wooper194-USB kernel: [ 0.313285] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 May 5 18:39:08 wooper194-USB kernel: [ 0.313293] uhci_hcd 0000:00:1d.2: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 0.313296] uhci_hcd 0000:00:1d.2: UHCI Host Controller May 5 18:39:08 wooper194-USB kernel: [ 0.313338] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 May 5 18:39:08 wooper194-USB kernel: [ 0.313373] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480 May 5 18:39:08 wooper194-USB kernel: [ 0.313479] usb usb4: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.313511] hub 4-0:1.0: USB hub found May 5 18:39:08 wooper194-USB kernel: [ 0.313519] hub 4-0:1.0: 2 ports detected May 5 18:39:08 wooper194-USB kernel: [ 0.313573] alloc irq_desc for 16 on node -1 May 5 18:39:08 wooper194-USB kernel: [ 0.313576] alloc kstat_irqs on node -1 May 5 18:39:08 wooper194-USB kernel: [ 0.313582] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 May 5 18:39:08 wooper194-USB kernel: [ 0.313591] uhci_hcd 0000:00:1d.3: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 0.313594] uhci_hcd 0000:00:1d.3: UHCI Host Controller May 5 18:39:08 wooper194-USB kernel: [ 0.313641] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 May 5 18:39:08 wooper194-USB kernel: [ 0.313675] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400 May 5 18:39:08 wooper194-USB kernel: [ 0.313789] usb usb5: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.313823] hub 5-0:1.0: USB hub found May 5 18:39:08 wooper194-USB kernel: [ 0.313830] hub 5-0:1.0: 2 ports detected May 5 18:39:08 wooper194-USB kernel: [ 0.313951] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 May 5 18:39:08 wooper194-USB kernel: [ 0.314307] serio: i8042 KBD port at 0x60,0x64 irq 1 May 5 18:39:08 wooper194-USB kernel: [ 0.314316] serio: i8042 AUX port at 0x60,0x64 irq 12 May 5 18:39:08 wooper194-USB kernel: [ 0.314464] mice: PS/2 mouse device common for all mice May 5 18:39:08 wooper194-USB kernel: [ 0.314603] rtc_cmos 00:03: RTC can wake from S4 May 5 18:39:08 wooper194-USB kernel: [ 0.314653] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 May 5 18:39:08 wooper194-USB kernel: [ 0.314682] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs May 5 18:39:08 wooper194-USB kernel: [ 0.314815] device-mapper: uevent: version 1.0.3 May 5 18:39:08 wooper194-USB kernel: [ 0.318276] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected] May 5 18:39:08 wooper194-USB kernel: [ 0.318369] device-mapper: multipath: version 1.1.0 loaded May 5 18:39:08 wooper194-USB kernel: [ 0.318373] device-mapper: multipath round-robin: version 1.0.0 loaded May 5 18:39:08 wooper194-USB kernel: [ 0.319993] EISA: Probing bus 0 at eisa.0 May 5 18:39:08 wooper194-USB kernel: [ 0.320022] EISA: Detected 0 cards. May 5 18:39:08 wooper194-USB kernel: [ 0.321971] cpuidle: using governor ladder May 5 18:39:08 wooper194-USB kernel: [ 0.321975] cpuidle: using governor menu May 5 18:39:08 wooper194-USB kernel: [ 0.322462] TCP cubic registered May 5 18:39:08 wooper194-USB kernel: [ 0.322638] NET: Registered protocol family 10 May 5 18:39:08 wooper194-USB kernel: [ 0.323131] lo: Disabled Privacy Extensions May 5 18:39:08 wooper194-USB kernel: [ 0.323451] NET: Registered protocol family 17 May 5 18:39:08 wooper194-USB kernel: [ 0.323519] Using IPI No-Shortcut mode May 5 18:39:08 wooper194-USB kernel: [ 0.323632] PM: Resume from disk failed. May 5 18:39:08 wooper194-USB kernel: [ 0.323644] registered taskstats version 1 May 5 18:39:08 wooper194-USB kernel: [ 0.323867] Magic number: 10:857:644 May 5 18:39:08 wooper194-USB kernel: [ 0.323978] rtc_cmos 00:03: setting system clock to 2010-05-05 18:38:59 UTC (1273084739) May 5 18:39:08 wooper194-USB kernel: [ 0.323982] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found May 5 18:39:08 wooper194-USB kernel: [ 0.323984] EDD information not available. May 5 18:39:08 wooper194-USB kernel: [ 0.343763] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 May 5 18:39:08 wooper194-USB kernel: [ 0.491055] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.01, max UDMA/66 May 5 18:39:08 wooper194-USB kernel: [ 0.491202] ata3.00: ATA-7: Hitachi HDS721616PLA380, P22OABEA, max UDMA/133 May 5 18:39:08 wooper194-USB kernel: [ 0.491207] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) May 5 18:39:08 wooper194-USB kernel: [ 0.496303] ata1.00: configured for UDMA/66 May 5 18:39:08 wooper194-USB kernel: [ 0.504923] ata3.00: configured for UDMA/133 May 5 18:39:08 wooper194-USB kernel: [ 0.667634] usb 1-2: new high speed USB device using ehci_hcd and address 2 May 5 18:39:08 wooper194-USB kernel: [ 0.701174] Freeing initrd memory: 7629k freed May 5 18:39:08 wooper194-USB kernel: [ 0.835677] isapnp: No Plug & Play device found May 5 18:39:08 wooper194-USB kernel: [ 0.837181] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H58N 1.01 PQ: 0 ANSI: 5 May 5 18:39:08 wooper194-USB kernel: [ 0.841629] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray May 5 18:39:08 wooper194-USB kernel: [ 0.841635] Uniform CD-ROM driver Revision: 3.20 May 5 18:39:08 wooper194-USB kernel: [ 0.841788] sr 0:0:0:0: Attached scsi CD-ROM sr0 May 5 18:39:08 wooper194-USB kernel: [ 0.841879] sr 0:0:0:0: Attached scsi generic sg0 type 5 May 5 18:39:08 wooper194-USB kernel: [ 0.842079] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72161 P22O PQ: 0 ANSI: 5 May 5 18:39:08 wooper194-USB kernel: [ 0.842234] sd 2:0:0:0: Attached scsi generic sg1 type 0 May 5 18:39:08 wooper194-USB kernel: [ 0.842338] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) May 5 18:39:08 wooper194-USB kernel: [ 0.842397] sd 2:0:0:0: [sda] Write Protect is off May 5 18:39:08 wooper194-USB kernel: [ 0.842401] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 May 5 18:39:08 wooper194-USB kernel: [ 0.842431] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 5 18:39:08 wooper194-USB kernel: [ 0.842604] sda: May 5 18:39:08 wooper194-USB kernel: [ 0.856468] usb 1-2: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 0.867318] sda1 May 5 18:39:08 wooper194-USB kernel: [ 0.867654] sd 2:0:0:0: [sda] Attached SCSI disk May 5 18:39:08 wooper194-USB kernel: [ 0.867669] Freeing unused kernel memory: 656k freed May 5 18:39:08 wooper194-USB kernel: [ 0.867992] Write protecting the kernel text: 4676k May 5 18:39:08 wooper194-USB kernel: [ 0.868023] Write protecting the kernel read-only data: 1840k May 5 18:39:08 wooper194-USB kernel: [ 0.893984] udev: starting version 151 May 5 18:39:08 wooper194-USB kernel: [ 0.968095] usb 1-6: new high speed USB device using ehci_hcd and address 3 May 5 18:39:08 wooper194-USB kernel: [ 1.097950] usb 1-6: configuration #1 chosen from 1 choice May 5 18:39:08 wooper194-USB kernel: [ 1.169742] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) May 5 18:39:08 wooper194-USB kernel: [ 1.169774] 8139cp 0000:01:05.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too May 5 18:39:08 wooper194-USB kernel: [ 1.187827] Initializing USB Mass Storage driver... May 5 18:39:08 wooper194-USB kernel: [ 1.192181] 8139too Fast Ethernet driver 0.9.28 May 5 18:39:08 wooper194-USB kernel: [ 1.192226] alloc irq_desc for 20 on node -1 May 5 18:39:08 wooper194-USB kernel: [ 1.192228] alloc kstat_irqs on node -1 May 5 18:39:08 wooper194-USB kernel: [ 1.192236] 8139too 0000:01:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 May 5 18:39:08 wooper194-USB kernel: [ 1.196429] eth0: RealTek RTL8139 at 0xe800, 00:1b:b9:cd:5c:af, IRQ 20 May 5 18:39:08 wooper194-USB kernel: [ 1.200613] scsi4 : SCSI emulation for USB Mass Storage devices May 5 18:39:08 wooper194-USB kernel: [ 1.200842] usbcore: registered new interface driver usb-storage May 5 18:39:08 wooper194-USB kernel: [ 1.200846] USB Mass Storage support registered. May 5 18:39:08 wooper194-USB kernel: [ 1.201479] usb-storage: device found at 3 May 5 18:39:08 wooper194-USB kernel: [ 1.201482] usb-storage: waiting for device to settle before scanning May 5 18:39:08 wooper194-USB kernel: [ 6.200155] usb-storage: device scan complete May 5 18:39:08 wooper194-USB kernel: [ 6.200916] scsi 4:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2 May 5 18:39:08 wooper194-USB kernel: [ 6.202267] sd 4:0:0:0: Attached scsi generic sg2 type 0 May 5 18:39:08 wooper194-USB kernel: [ 6.203146] sd 4:0:0:0: [sdb] 7897088 512-byte logical blocks: (4.04 GB/3.76 GiB) May 5 18:39:08 wooper194-USB kernel: [ 6.203770] sd 4:0:0:0: [sdb] Write Protect is off May 5 18:39:08 wooper194-USB kernel: [ 6.203775] sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00 May 5 18:39:08 wooper194-USB kernel: [ 6.203778] sd 4:0:0:0: [sdb] Assuming drive cache: write through May 5 18:39:08 wooper194-USB kernel: [ 6.206894] sd 4:0:0:0: [sdb] Assuming drive cache: write through May 5 18:39:08 wooper194-USB kernel: [ 6.206903] sdb: sdb1 sdb2 < sdb5 > May 5 18:39:08 wooper194-USB kernel: [ 6.483352] sd 4:0:0:0: [sdb] Assuming drive cache: write through May 5 18:39:08 wooper194-USB kernel: [ 6.483359] sd 4:0:0:0: [sdb] Attached SCSI removable disk May 5 18:39:08 wooper194-USB kernel: [ 6.552582] EXT4-fs (sdb1): mounted filesystem with ordered data mode May 5 18:39:08 wooper194-USB kernel: [ 7.024596] Adding 228344k swap on /dev/sdb5. Priority:-1 extents:1 across:228344k May 5 18:39:08 wooper194-USB kernel: [ 7.092343] udev: starting version 151 May 5 18:39:08 wooper194-USB kernel: [ 7.632492] Linux agpgart interface v0.103 May 5 18:39:08 wooper194-USB kernel: [ 7.699252] agpgart-intel 0000:00:00.0: Intel 945G Chipset May 5 18:39:08 wooper194-USB kernel: [ 7.699497] agpgart-intel 0000:00:00.0: detected 7932K stolen memory May 5 18:39:08 wooper194-USB kernel: [ 7.775708] intel_rng: FWH not detected May 5 18:39:08 wooper194-USB kernel: [ 7.830348] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 May 5 18:39:08 wooper194-USB kernel: [ 7.921585] psmouse serio1: ID: 10 00 64 May 5 18:39:08 wooper194-USB kernel: [ 8.018701] [drm] Initialized drm 1.1.0 20060810 May 5 18:39:08 wooper194-USB kernel: [ 8.102825] lp: driver loaded but no devices found May 5 18:39:08 wooper194-USB kernel: [ 8.225739] type=1505 audit(1273052347.400:2): operation="profile_load" pid=556 name="/sbin/dhclient3" May 5 18:39:08 wooper194-USB kernel: [ 8.226605] type=1505 audit(1273052347.400:3): operation="profile_load" pid=556 name="/usr/lib/NetworkManager/nm-dhcp-client.action" May 5 18:39:08 wooper194-USB kernel: [ 8.227065] type=1505 audit(1273052347.400:4): operation="profile_load" pid=556 name="/usr/lib/connman/scripts/dhclient-script" May 5 18:39:08 wooper194-USB kernel: [ 8.260628] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 5 18:39:08 wooper194-USB kernel: [ 8.260635] i915 0000:00:02.0: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 8.286190] [drm] set up 7M of stolen space May 5 18:39:08 wooper194-USB kernel: [ 8.287624] [drm] initialized overlay support May 5 18:39:08 wooper194-USB kernel: [ 8.465649] fb0: inteldrmfb frame buffer device May 5 18:39:08 wooper194-USB kernel: [ 8.465653] registered panic notifier May 5 18:39:08 wooper194-USB kernel: [ 8.465663] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 May 5 18:39:08 wooper194-USB kernel: [ 8.536656] vga16fb: initializing May 5 18:39:08 wooper194-USB kernel: [ 8.536663] vga16fb: mapped to 0xc00a0000 May 5 18:39:08 wooper194-USB kernel: [ 8.536668] vga16fb: not registering due to another framebuffer present May 5 18:39:08 wooper194-USB kernel: [ 8.606960] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 May 5 18:39:08 wooper194-USB kernel: [ 8.695035] Console: switching to colour frame buffer device 160x64 May 5 18:39:08 wooper194-USB kernel: [ 9.265862] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 May 5 18:39:08 wooper194-USB kernel: [ 9.265901] HDA Intel 0000:00:1b.0: setting latency timer to 64 May 5 18:39:08 wooper194-USB kernel: [ 9.473440] hda_codec: ALC883: BIOS auto-probing. May 5 18:39:08 wooper194-USB kernel: [ 9.475093] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
オフライン
#9 2010-05-05 11:45:22
- wooper194
- メンバ
- From: Yokohama, Japan
- 登録日: 2010-04-30
Re: ログイン後、数秒~１分でフリーズする
syslog (2)
コード:
May 5 18:39:08 wooper194-USB avahi-daemon[672]: Found user 'avahi' (UID 104) and group 'avahi' (GID 111). May 5 18:39:08 wooper194-USB avahi-daemon[672]: Successfully dropped root privileges. May 5 18:39:08 wooper194-USB avahi-daemon[672]: avahi-daemon 0.6.25 starting up. May 5 18:39:08 wooper194-USB gdm-binary[659]: WARNING: Unable to load file '/etc/gdm/custom.conf': No such file or directory May 5 18:39:08 wooper194-USB avahi-daemon[672]: Successfully called chroot(). May 5 18:39:08 wooper194-USB avahi-daemon[672]: Successfully dropped remaining capabilities. May 5 18:39:08 wooper194-USB avahi-daemon[673]: chroot.c: open() failed: No such file or directory May 5 18:39:08 wooper194-USB avahi-daemon[672]: Failed to open /etc/resolv.conf: Invalid argument May 5 18:39:08 wooper194-USB avahi-daemon[672]: No service file found in /etc/avahi/services. May 5 18:39:08 wooper194-USB avahi-daemon[672]: Network interface enumeration completed. May 5 18:39:08 wooper194-USB avahi-daemon[672]: Registering HINFO record with values 'I686'/'LINUX'. May 5 18:39:08 wooper194-USB avahi-daemon[672]: Server startup complete. Host name is wooper194-USB.local. Local service cookie is 3637006096. May 5 18:39:08 wooper194-USB NetworkManager: <info> starting... May 5 18:39:08 wooper194-USB NetworkManager: <info> Trying to start the modem-manager... May 5 18:39:08 wooper194-USB NetworkManager: SCPlugin-Ifupdown: init! May 5 18:39:08 wooper194-USB NetworkManager: SCPlugin-Ifupdown: update_system_hostname May 5 18:39:08 wooper194-USB NetworkManager: SCPluginIfupdown: management mode: unmanaged May 5 18:39:08 wooper194-USB NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:01:05.0/net/eth0, iface: eth0) May 5 18:39:08 wooper194-USB NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1e.0/0000:01:05.0/net/eth0, iface: eth0): no ifupdown configuration found. May 5 18:39:08 wooper194-USB NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/lo, iface: lo) May 5 18:39:08 wooper194-USB NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/lo, iface: lo): no ifupdown configuration found. May 5 18:39:08 wooper194-USB NetworkManager: SCPlugin-Ifupdown: end _init. May 5 18:39:08 wooper194-USB NetworkManager: Loaded plugin ifupdown: (C) 2008 Canonical Ltd. To report bugs please use the NetworkManager mailing list. May 5 018:39:08 wooper194-USB kernel: [ 9.701597] type=1505 audit(1273052348.876:5): operation="profile_load" pid=714 name="/usr/share/gdm/guest-session/Xsession" May 5 18:39:08 wooper194-USB kernel: [ 9.710681] type=1505 audit(1273052348.884:6): operation="profile_replace" pid=715 name="/sbin/dhclient3" May 5 18:39:08 wooper194-USB kernel: [ 9.711559] type=1505 audit(1273052348.884:7): operation="profile_replace" pid=715 name="/usr/lib/NetworkManager/nm-dhcp-client.action" May 5 18:39:08 wooper194-USB kernel: [ 9.712397] type=1505 audit(1273052348.888:8): operation="profile_replace" pid=715 name="/usr/lib/connman/scripts/dhclient-script" May 5 18:39:08 wooper194-USB NetworkManager: Loaded plugin keyfile: (c) 2007 - 2008 Red Hat, Inc. To report bugs please use the NetworkManager mailing list. May 5 18:39:08 wooper194-USB NetworkManager: <info> WiFi enabled by radio killswitch; enabled by state file May 5 18:39:08 wooper194-USB NetworkManager: <info> WWAN enabled by radio killswitch; enabled by state file May 5 18:39:08 wooper194-USB NetworkManager: SCPlugin-Ifupdown: (155532112) ... get_connections. May 5 18:39:08 wooper194-USB NetworkManager: SCPlugin-Ifupdown: (155532112) ... get_connections (managed=false): return empty list. May 5 18:39:09 wooper194-USB modem-manager: Loaded plugin MotoC May 5 18:39:09 wooper194-USB NetworkManager: Ifupdown: get unmanaged devices count: 0 May 5 18:39:09 wooper194-USB kernel: [ 10.028781] type=1505 audit(1273052349.204:9): operation="profile_load" pid=716 name="/usr/bin/evince" May 5 18:39:09 wooper194-USB modem-manager: Loaded plugin Gobi May 5 18:39:09 wooper194-USB modem-manager: Loaded plugin Longcheer May 5 18:39:09 wooper194-USB modem-manager: Loaded plugin Novatel May 5 18:39:09 wooper194-USB modem-manager: Loaded plugin Ericsson MBM May 5 18:39:09 wooper194-USB modem-manager: Loaded plugin Option High-Speed May 5 18:39:09 wooper194-USB modem-manager: Loaded plugin Option May 5 18:39:09 wooper194-USB modem-manager: Loaded plugin Generic May 5 18:39:09 wooper194-USB modem-manager: Loaded plugin Sierra May 5 18:39:09 wooper194-USB modem-manager: Loaded plugin AnyData May 5 18:39:09 wooper194-USB modem-manager: Loaded plugin ZTE May 5 18:39:09 wooper194-USB modem-manager: Loaded plugin Nokia May 5 18:39:09 wooper194-USB modem-manager: Loaded plugin Huawei May 5 18:39:09 wooper194-USB NetworkManager: <info> (eth0): carrier is OFF May 5 18:39:09 wooper194-USB NetworkManager: <info> (eth0): new Ethernet device (driver: '8139too') May 5 18:39:09 wooper194-USB NetworkManager: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/0 May 5 18:39:09 wooper194-USB NetworkManager: <info> (eth0): now managed May 5 18:39:09 wooper194-USB NetworkManager: <info> (eth0): device state change: 1 -> 2 (reason 2) May 5 18:39:09 wooper194-USB NetworkManager: <info> (eth0): bringing up device. May 5 18:39:09 wooper194-USB NetworkManager: <info> (eth0): preparing device. May 5 18:39:09 wooper194-USB NetworkManager: <info> (eth0): deactivating device (reason: 2). May 5 18:39:09 wooper194-USB kernel: [ 10.054055] eth0: link down May 5 18:39:09 wooper194-USB kernel: [ 10.054492] ADDRCONF(NETDEV_UP): eth0: link is not ready May 5 18:39:09 wooper194-USB NetworkManager: Added default wired connection 'Auto eth0' for /sys/devices/pci0000:00/0000:00:1e.0/0000:01:05.0/net/eth0 May 5 18:39:09 wooper194-USB NetworkManager: <WARN> default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files May 5 18:39:09 wooper194-USB NetworkManager: <info> modem-manager is now available May 5 18:39:09 wooper194-USB NetworkManager: <info> Trying to start the supplicant... May 5 18:39:09 wooper194-USB kernel: [ 10.103380] type=1505 audit(1273052349.276:10): operation="profile_load" pid=716 name="/usr/bin/evince-previewer" May 5 18:39:09 wooper194-USB kernel: [ 10.158607] type=1505 audit(1273052349.332:11): operation="profile_load" pid=716 name="/usr/bin/evince-thumbnailer" May 5 18:39:09 wooper194-USB gdm-binary[659]: WARNING: Unable to find users: no seat-id found May 5 18:39:09 wooper194-USB gdm-simple-slave[868]: WARNING: Unable to load file '/etc/gdm/custom.conf': No such file or directory May 5 18:39:09 wooper194-USB cron[964]: (CRON) INFO (pidfile fd = 3) May 5 18:39:09 wooper194-USB init: apport pre-start process (959) terminated with status 1 May 5 18:39:09 wooper194-USB anacron[972]: Anacron 2.3 started on 2010-05-05 May 5 18:39:09 wooper194-USB cron[976]: (CRON) STARTUP (fork ok) May 5 18:39:09 wooper194-USB acpid: starting up with proc fs May 5 18:39:09 wooper194-USB init: apport post-stop process (974) terminated with status 1 May 5 18:39:09 wooper194-USB anacron[972]: Will run job `cron.daily' in 5 min. May 5 18:39:09 wooper194-USB anacron[972]: Will run job `cron.weekly' in 10 min. May 5 18:39:09 wooper194-USB anacron[972]: Will run job `cron.monthly' in 15 min. May 5 18:39:09 wooper194-USB anacron[972]: Jobs will be executed sequentially May 5 18:39:10 wooper194-USB cron[976]: (CRON) INFO (Running @reboot jobs) May 5 18:39:10 wooper194-USB acpid: 36 rules loaded May 5 18:39:10 wooper194-USB acpid: waiting for events: event logging is off May 5 18:39:10 wooper194-USB kernel: [ 11.112868] ppdev: user-space parallel port driver May 5 18:39:14 wooper194-USB acpid: client connected from 1121[0:0] May 5 18:39:14 wooper194-USB acpid: 1 client rule loaded May 5 18:39:15 wooper194-USB gdm-session-worker[1160]: WARNING: Unable to load file '/etc/gdm/custom.conf': No such file or directory May 5 18:39:15 wooper194-USB rtkit-daemon[1168]: Sucessfully called chroot. May 5 18:39:15 wooper194-USB rtkit-daemon[1168]: Sucessfully dropped privileges. May 5 18:39:15 wooper194-USB rtkit-daemon[1168]: Sucessfully limited resources. May 5 18:39:15 wooper194-USB rtkit-daemon[1168]: Running. May 5 18:39:15 wooper194-USB rtkit-daemon[1168]: Watchdog thread running. May 5 18:39:15 wooper194-USB rtkit-daemon[1168]: Canary thread running. May 5 18:39:16 wooper194-USB polkitd[1172]: started daemon version 0.96 using authority implementation `local' version `0.96' May 5 18:39:16 wooper194-USB rtkit-daemon[1168]: Sucessfully made thread 1166 of process 1166 (n/a) owned by '114' high priority at nice level -11. May 5 18:39:16 wooper194-USB rtkit-daemon[1168]: Supervising 1 threads of 1 processes of 1 users. May 5 18:39:16 wooper194-USB rtkit-daemon[1168]: Sucessfully made thread 1213 of process 1166 (n/a) owned by '114' RT at priority 5. May 5 18:39:16 wooper194-USB rtkit-daemon[1168]: Supervising 2 threads of 1 processes of 1 users. May 5 18:39:16 wooper194-USB rtkit-daemon[1168]: Sucessfully made thread 1214 of process 1166 (n/a) owned by '114' RT at priority 5. May 5 18:39:16 wooper194-USB rtkit-daemon[1168]: Supervising 3 threads of 1 processes of 1 users. May 5 18:39:16 wooper194-USB gdm-simple-greeter[1159]: Gtk-WARNING: /build/buildd/gtk+2.0-2.20.0/gtk/gtkwidget.c:5636: widget not within a GtkWindow May 5 18:39:18 wooper194-USB acpid: client connected from 1252[108:114] May 5 18:39:18 wooper194-USB acpid: 1 client rule loaded May 5 18:39:19 wooper194-USB gdm-session-worker[1160]: GLib-GObject-CRITICAL: g_value_get_boolean: assertion `G_VALUE_HOLDS_BOOLEAN (value)' failed May 5 18:39:24 wooper194-USB rtkit-daemon[1168]: Sucessfully made thread 1352 of process 1352 (n/a) owned by '1000' high priority at nice level -11. May 5 18:39:24 wooper194-USB rtkit-daemon[1168]: Supervising 4 threads of 2 processes of 2 users. May 5 18:39:24 wooper194-USB rtkit-daemon[1168]: Sucessfully made thread 1360 of process 1352 (n/a) owned by '1000' RT at priority 5. May 5 18:39:24 wooper194-USB rtkit-daemon[1168]: Supervising 5 threads of 2 processes of 2 users. May 5 18:39:24 wooper194-USB rtkit-daemon[1168]: Sucessfully made thread 1361 of process 1352 (n/a) owned by '1000' RT at priority 5. May 5 18:39:24 wooper194-USB rtkit-daemon[1168]: Supervising 6 threads of 2 processes of 2 users. May 5 18:39:25 wooper194-USB rtkit-daemon[1168]: Sucessfully made thread 1367 of process 1367 (n/a) owned by '1000' high priority at nice level -11. May 5 18:39:25 wooper194-USB rtkit-daemon[1168]: Supervising 7 threads of 3 processes of 2 users. May 5 18:39:25 wooper194-USB pulseaudio[1367]: pid.c: Daemon already running. May 5 18:40:29 wooper194-USB AptDaemon: INFO: Initializing daemon May 5 18:41:15 wooper194-USB ntfs-3g[1547]: Version 2010.3.6 external FUSE 28 May 5 18:41:15 wooper194-USB ntfs-3g[1547]: Mounted /dev/sda1 (Read-Write, label "", NTFS 3.1) May 5 18:41:15 wooper194-USB ntfs-3g[1547]: Cmdline options: rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000,dmask=0077 May 5 18:41:15 wooper194-USB ntfs-3g[1547]: Mount options: rw,nosuid,nodev,uhelper=udisks,silent,allow_other,nonempty,relatime,fsname=/dev/sda1,blkdev,blksize=4096,default_permissions May 5 18:41:15 wooper194-USB ntfs-3g[1547]: Global ownership and permissions enforced, configuration type 1
オフライン
#10 2010-05-05 12:49:18
- hmatsue
- アドバイザ
- 登録日: 2009-03-10
Re: ログイン後、数秒~１分でフリーズする
フリーズした状態のログが上記のものでしょうか。
これといってクリティカルなものは無いような。。
強いていうなら、起動後1分ほどしてからntfsな内蔵HDDと思われるものをマウントしているようですが、これが悪さをしているとは考えにくいような。。
システムは生きているけど、GUIだけ凍っているのかな。
ログイン画面で、ユーザ名選択後、Failsaveなgnomeを選択してログインするとフリーズしなかったりしますでしょうか。
オフライン
#11 2010-05-05 13:24:39
- wooper194
- メンバ
- From: Yokohama, Japan
- 登録日: 2010-04-30
Re: ログイン後、数秒~１分でフリーズする
hmatsue による投稿:
ログイン画面で、ユーザ名選択後、Failsaveなgnomeを選択してログインするとフリーズしなかったりしますでしょうか。
初歩的な質問で申し訳ないのですが、どのようにして選択するのでしょうか？
オフライン
#12 2010-05-05 15:36:42
- hmatsue
- アドバイザ
- 登録日: 2009-03-10
Re: ログイン後、数秒~１分でフリーズする
誤記ってました。
Failsafeですね。
ログイン画面で、最初にユーザ名を選択するかと思います。
そうすると画面下にセッションを選択する項目が表示されるかと思います。
そこをクリックすると、Failsafe Gnomeが選択できたかと思います。
オフライン
#13 2010-05-05 18:22:43
- Templer
- メンバ
- 登録日: 2009-07-08
Re: ログイン後、数秒~１分でフリーズする
「Failsafe GNOME」はUbuntu9.10以降（もっと前かも）はなくなっていると思います。
ので、とりあえず、下記リンクの方法で「Run in failsafe graphic mode」で起動させ、大まかな切り分けをしてみるというのはどうでしょう。
https://wiki.ubuntu.com/LucidLynx/Relea … A%E3%81%84 [Friendly Recovery（リカバリーモード）時、一部の文字が読めない]
オフライン
#14 2010-05-05 21:47:12
- hmatsue
- アドバイザ
- 登録日: 2009-03-10
Re: ログイン後、数秒~１分でフリーズする
うーん。少なくとも10.04のUbuntu StudioではFailsafe Gnomeは選択できるようですが。。
切り分けという意味ではfailsafe graphic modeでやっても大体の問題の発生箇所の切り分けができると思いますので、やりやすい方でやってもらえればよいかと思います。
オフライン
#15 2010-05-05 22:27:25
- Templer
- メンバ
- 登録日: 2009-07-08
Re: ログイン後、数秒~１分でフリーズする
すみません、「Failsafe Gnome」ありました。
私が視界から外していただけでした。
お騒がせして申し訳ありませんでした。
オフライン
#16 2010-05-06 21:28:51
- wooper194
- メンバ
- From: Yokohama, Japan
- 登録日: 2010-04-30
Re: ログイン後、数秒~１分でフリーズする
Failsave GNOMEでの起動を試みました。
無事フリーズせず、正常に動作しました。
問題箇所の特定にはどうすれば良いでしょうか？
オフライン
#17 2010-05-07 09:36:38
- hmatsue
- アドバイザ
- 登録日: 2009-03-10
Re: ログイン後、数秒~１分でフリーズする
Failsafeで問題が再現しなかったということは、compiz(視覚効果)あたりが悪さをしていたということかと思います。
ただ、compiz自体は私の環境では問題無く動作しているので、本質的な問題はグラフィックドライバにあるのではないかと思います。
そちらのPCは
http://www1.pcdepot.co.jp/webshop/commerce/CSfEcLastBtoGoodsPage_001.jsp?GOODS_NO=32014
でよかったでしょうか。
https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/552903
の件と同じ現象かも。
https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/552903
の#6の対応で改善しないでしょうか。
オフライン
#18 2010-05-07 19:42:07
- wooper194
- メンバ
- From: Yokohama, Japan
- 登録日: 2010-04-30
Re: ログイン後、数秒~１分でフリーズする
Ok found the problem.
Removing fglrx or deactivating it doesn't remove the file
/etc/X11/Xsession.d/10fglrx
That is run sometime after the /etc/environment (since i tried to put the correct values there, but was replaced by this)
これは#17のリンク先にあった情報ですが、
/etc/X11/Xsession.d/10fglrx
を削除すれば良いということでしょうか？
オフライン
#19 2010-05-07 20:33:30
- hmatsue
- アドバイザ
- 登録日: 2009-03-10
Re: ログイン後、数秒~１分でフリーズする
ごめんなさい。
なにか勘違いしていたのか、全然関係ない投稿をしてしまいました。
#17は無かったことにして下さい。。
GMA950についての既知のバグ、および、ワークアラウンドが無いか調べてみます。
少々お時間下さい。
オフライン
#20 2010-05-07 20:59:46
- hmatsue
- アドバイザ
- 登録日: 2009-03-10
Re: ログイン後、数秒~１分でフリーズする
https://wiki.ubuntu.com/X/Lucidi945Freezes
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/450853
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/475429
などが既知の例としてあるようですが、イマイチ、これといった対策が無いような。。
ためしに、Failsafeでログイン後、端末を開いて、
コード:
$ gconftool-2 -t string --set /desktop/gnome/applications/window_manager/current /usr/bin/metacity $ gconftool-2 -t string --set /desktop/gnome/applications/window_manager/default /usr/bin/metacity
で通常のgnomeでログインしなおしてみるとどうでしょうか。
オフライン
#21 2010-05-07 21:07:51
- hmatsue
- アドバイザ
- 登録日: 2009-03-10
Re: ログイン後、数秒~１分でフリーズする
何度もすいません。追加で下記も実行しておいて下さい。
コード:
$ gconftool -t string --set /desktop/gnome/session/required_components/windowmanager metacity
オフライン
#22 2010-05-07 21:19:14
- hmatsue
- アドバイザ
- 登録日: 2009-03-10
Re: ログイン後、数秒~１分でフリーズする
hmatsue による投稿:
何度もすいません。追加で下記も実行しておいて下さい。
コード:
$ gconftool -t string --set /desktop/gnome/session/required_components/windowmanager metacity
うそです。間違いました。
コード:
$ gconftool-2 -t string --set /desktop/gnome/session/required_components/windowmanager metacity
です。
# 本当にすいません。。
オフライン
#23 2010-05-28 19:57:16
- wooper194
- メンバ
- From: Yokohama, Japan
- 登録日: 2010-04-30
Re: ログイン後、数秒~１分でフリーズする
返事が遅れて大変申し訳ございません。（このところUbuntuをさわる暇がなかったのです…。）
コード:
$ gconftool-2 -t string --set /desktop/gnome/applications/window_manager/current /usr/bin/metacity $ gconftool-2 -t string --set /desktop/gnome/applications/window_manager/default /usr/bin/metacity $ gconftool-2 -t string --set /desktop/gnome/session/required_components/windowmanager metacity
このコマンドを実行してみましたが、特に変化は起きませんでした。
GNOMEに切り替わったかどうか怪しいのですが、どのようにして判別できますか？
ところで、Failsave GNOMEはWindowsで言うセーフモードのような解釈で正しいでしょうか？
オフライン
#24 2010-05-28 20:50:23
- hmatsue
- アドバイザ
- 登録日: 2009-03-10
Re: ログイン後、数秒~１分でフリーズする
Failsafe GNOMEは、「GNOMEレベルでの特殊効果を極力削ぎ落としたシンプルな状態」と認識しています。Windowsでいうセーフモードとの比較は難しいです。
上記のコマンド実行後に、通常のGNOMEセッションでログインしてもフリーズ現象が発生した、という理解でよろしいでしょうか。
上記コマンドはGNOMEの機能を一部シンプルなものに切替えることができると考えています(もし改善が見られなかったのであれば、私の理解が不足していて設定項目が間違えている、あるいは、足りない可能性が高いです)。
一度、ログアウトして、通常のGNOMEセッションでログインし直したときにこれまでと差がみられるかどうかがポイントになります。
ダメだったら、xorg.confを書いてintelドライバの方で機能を制限する方法もありますが、そちらを試してみますか?
あと、前回から少し時間が開いたので、システムを最新に更新して再起動で問題が解決しないかも念の為確認してみて下さい。
オフライン
#25 2010-05-30 18:00:12
- wooper194
- メンバ
- From: Yokohama, Japan
- 登録日: 2010-04-30
Re: ログイン後、数秒~１分でフリーズする
なるほど、パネルのアイコンをクリックしても視覚効果が出ないのはそういうことだったんですね。
システムを一通り更新しましたが、まったく改善しません。
どうしても解決が見られないなら、Failsafeでの運用を継続しても問題ないでしょうか…？
オフライン
2007年10月11日以降の投稿は、クリエイティブ・コモンズ-表示-継承-3.0 (Cc-by-sa-3.0)で提供されます。
著作権等の他者の権利を不当に侵害するような投稿、特定の個人や団体などへの誹謗中傷を含む投稿、個人情報を含む投稿など、違法性のある投稿は行わないでください。
Ubuntu and Canonical are registered trademarks of Canonical Ltd.