
Ubuntu日本語フォーラム

ログインしていません。
ubuntu10.10を使っています。
PCはGatewayのLT1001jを使っています。
このpcには内蔵の子機?が入っているのでこの内蔵の無線LANを使おうと思っています。
このpcでは以前Windows xpを使っていました。
それでWindows xpを使っていた時にには内蔵の子機で無線LANに接続できました。
ちなみにルーターはnecのやつを使っています。
超pc初心者ですがご回答のほどよろしくお願いします。
オフライン
http://lottie.blog42.fc2.com/blog-entry-286.html
によるとAspireOne(AOA150)と中身は同じようです。AOA150であれば、
https://help.ubuntu.com/community/AspireOne/AOA150
によると、無線LANは正常に動作するようです。
スクリーンショットが11.04のものなので多少見た目は異なりますが、ほぼ、
https://wiki.ubuntulinux.jp/UbuntuTips/Hardware/HowToSetupWirelessNic
と同じ手順で無線LANに接続できるかと思います。
オフライン
早速の返信ありがとうございます。
https://wiki.ubuntulinux.jp/UbuntuTips/Hardware/HowToSetupWirelessNic
に書いてあった方法でやってみたのですがやはり無理でした。
オフライン
それでは、どこまで正常に動作していて、どこの設定が悪いのか、
あたりをつけるために下記のコマンドを実行してみて、出力を投稿してみて下さい。
なお、コマンドは、アプリケーション→アクセサリ→端末を起動して、そこで実行して下さい。
lshw -C network lspci -nn iwconfig lfconfig
また、ルータの型式も投稿願います。
# マニュアル掲載サイトへのリンクが分かれば、それもお願いします。
オフライン
lshw -C network
lspci -nn
iwconfig
lfconfig
と実行したところ
you@you-LT-10Q:~$ lshw -C network
WARNING: you should run this program as super-user.
PCI (sysfs)
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 02
serial: 00:23:8b:49:20:9e
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list rom ethernet physical
configuration: broadcast=yes driver=r8169 driverversion=2.3LK-NAPI ip=192.168.0.3 latency=0 multicast=yes
resources: irq:44 ioport:3000(size=256) memory:51010000-51010fff memory:51000000-5100ffff memory:51020000-5103ffff
*-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 01
serial: 00:24:2b:18:7a:bc
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ath5k driverversion=2.6.35-22-generic firmware=N/A latency=0 multicast=yes wireless=IEEE 802.11bg
resources: irq:18 memory:55200000-5520ffff
you@you-LT-10Q:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02)
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
you@you-LT-10Q:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
you@you-LT-10Q:~$ lfconfig
No command 'lfconfig' found, did you mean:
Command 'fconfig' from package 'redboot-tools' (main)
Command 'ifconfig' from package 'net-tools' (main)
Command 'ldconfig' from package 'libc-bin' (main)
lfconfig: command not found
と出てきました。
ちなみにルーターの型式は、Aterm WR6600Hです。
オフライン
まず、最初にお詫びと訂正です。
lfconfig
を実行して下さいと書いていましたが、正しくは、
ifconfig
です。すみません。
ただ、iwconfigの時点で大体の状況は掴めました。
mjww による投稿:
*-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 01
serial: 00:24:2b:18:7a:bc
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ath5k driverversion=2.6.35-22-generic firmware=N/A latency=0 multicast=yes wireless=IEEE 802.11bg
resources: irq:18 memory:55200000-5520ffff
lshwの結果ですが、無線LANデバイスはwlan0のインターフェース名で認識されており、問題なく動作しているように見えます。
mjww による投稿:
03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
手元の環境が11.04であるため、10.10でも同じか確証はありませんが、11.04では上記のデバイスに対応するカーネルモジュール(ドライバ)はath5kしかなく、他のドライバと混在して不安定な動作をしているということも無いと推測します。
ここまででデバイスの認識に問題はなさそうであると推測できます。
あとは、設定の問題です。
mjww による投稿:
wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
SSIDが設定されていないようです。
https://wiki.ubuntulinux.jp/UbuntuTips/Hardware/HowToSetupWirelessNic#head-866b56b3473a18566566807b1dd409b4b28c1bac
を参照して、
ステルス機能がOFFの場合、SSIDの選択ミスが無いか、
ステルス機能がONの場合、SSIDの入力ミスが無いか、
に注意して、もう一度、設定してみて下さい。
判らないところなどがあれば、どこが判らないか、どのような操作をしたのか、など詳しく状況を添えて質問して下さい。
mjww による投稿:
you@you-LT-10Q:~$ lfconfig
No command 'lfconfig' found, did you mean:
Command 'fconfig' from package 'redboot-tools' (main)
Command 'ifconfig' from package 'net-tools' (main)
Command 'ldconfig' from package 'libc-bin' (main)
lfconfig: command not found
と出てきました。
前述のように誤記してしまっていました。ifconfigが正しかったのですが、SSIDが設定されていないことが問題なので、ifconfigの出力は今は必要ありません。
mjww による投稿:
ちなみにルーターの型式は、Aterm WR6600Hです。
http://121ware.com/product/atermstation/manual/download_bb01.html#wr6600
からマニュアルをダウンロードしてみてみました。
P95(5-5)を見るとSSIDのステルス機能は初期状態では無効になっているようです。
またP93(5-3)を見ると、デフォルトでは、
暗号方式: WEP128
キーインデックス: 1
SSID: 本体のラベルに印刷
WEPキー: 本体のラベルに印刷
となっているようです。
もし、ご自身で設定変更されていれば、変更後の内容は把握されているはずだと思います。
変更した覚えが無ければ初期値のままのはずです。
# ただし、WEP128は強度が弱いと言われているので、強い暗号に変えていただいた方がよいような気もします。
オフライン
とりあえず
lshw -C network
lspci -nn
iwconfig
ifconfig
と実行した結果を書きますね
you@you-LT-10Q:~$ lshw -C network
WARNING: you should run this program as super-user.
PCI (sysfs)
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 02
serial: 00:23:8b:49:20:9e
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list rom ethernet physical
configuration: broadcast=yes driver=r8169 driverversion=2.3LK-NAPI ip=192.168.0.3 latency=0 multicast=yes
resources: irq:44 ioport:3000(size=256) memory:51010000-51010fff memory:51000000-5100ffff memory:51020000-5103ffff
*-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:03:00.0
logical name: wlan0
version: 01
serial: 00:24:2b:18:7a:bc
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=ath5k driverversion=2.6.35-30-generic firmware=N/A latency=0 multicast=yes wireless=IEEE 802.11bg
resources: irq:18 memory:55200000-5520ffff
you@you-LT-10Q:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02)
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02)
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
you@you-LT-10Q:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
you@you-LT-10Q:~$ ifconfig
eth0 Link encap:イーサネット ハードウェアアドレス 00:23:8b:49:20:9e
inetアドレス:192.168.0.3 ブロードキャスト:192.168.0.255 マスク:255.255.255.0
inet6アドレス: fe80::223:8bff:fe49:209e/64 範囲:リンク
UP BROADCAST RUNNING MULTICAST MTU:1500 メトリック:1
RXパケット:10952 エラー:0 損失:0 オーバラン:0 フレーム:0
TXパケット:5672 エラー:0 損失:0 オーバラン:0 キャリア:0
衝突(Collisions):0 TXキュー長:1000
RXバイト:15491606 (15.4 MB) TXバイト:484418 (484.4 KB)
割り込み:44 ベースアドレス:0x4000
lo Link encap:ローカルループバック
inetアドレス:127.0.0.1 マスク:255.0.0.0
inet6アドレス: ::1/128 範囲:ホスト
UP LOOPBACK RUNNING MTU:16436 メトリック:1
RXパケット:8 エラー:0 損失:0 オーバラン:0 フレーム:0
TXパケット:8 エラー:0 損失:0 オーバラン:0 キャリア:0
衝突(Collisions):0 TXキュー長:0
RXバイト:480 (480.0 B) TXバイト:480 (480.0 B)
wlan0 Link encap:イーサネット ハードウェアアドレス 00:24:2b:18:7a:bc
inet6アドレス: fe80::224:2bff:fe18:7abc/64 範囲:リンク
UP BROADCAST MULTICAST MTU:1500 メトリック:1
RXパケット:0 エラー:0 損失:0 オーバラン:0 フレーム:0
TXパケット:72 エラー:0 損失:0 オーバラン:0 キャリア:0
衝突(Collisions):0 TXキュー長:1000
RXバイト:0 (0.0 B) TXバイト:23615 (23.6 KB)
と出てきました。
SSIDがよく理解できないのですが、・・・
後、パスワードの所にはSSIDを入力したらいいのですか?
オフライン
すいません
私の初歩的なミスのせいでご迷惑をかけてしまいました。
原因はパスワードの所で大文字と小文字のミスをしていました
hmatsueさんには申し訳ないことをしたなと反省しております。
私のためにいろんな事を調べていただいてありがとうございました。
オフライン