お知らせ

  • 利用規約を守って投稿してください。また、よくある質問および投稿の手引きも参照してください。
  • メッセージの投稿にはアカウントが必要です。未登録の方は、ユーザ登録ページからアカウントを作成することができます。

#1 2015-01-26 13:00:05

souhalt
メンバ
登録日: 2015-01-26

どうすれば問題なく Ubuntu サーバをインストールできますか?

どうすれば問題なく Ubuntu サーバをインストールできますか?

* Problems of installation (for ubuntu-14.10-server-amd64, Broadcom 57780;tg3)

1.  何故、インストール中に下記の問題が発生するのでしょうか? どうすれば、それらの問題が解決するのでしょうか?

(1) 何故、 "ネットワークハードウェアの検出" の設定で、イーサネットコントローラ (Broadcom 57780) が検出されず、デバイスドライバ (tg3.ko) が使用されないのでしょうか?

  インストーラのデバイスドライバ (tg3.ko) を、インストールされたデバイスドライバ (tg3.ko) とバイナリコンペアすると、それらは全く同一です。
  インストール後にシステムをブートさせた時には、ネットワーク (eth0) を有効にできて、デバイスドライバ (tg3.ko) が使用されます。
  下に示す "How to install Ubuntu server from iso file on HDD" と "System conditions" を参照。

(2) 何故、 "インストーラコンポーネントのダウンロード" の設定で、インストーラはアーカイブミラー (jp.archive.ubuntu.com) からファイルをダウンロードするのに失敗するのでしょうか?

  もし、インストール中にネットワーク (eth0) を有効にできれば、それは成功するのでしょうか?
  インストール後にシステムをブートさせた時には、ネットワーク (eth0) を有効にできて、アーカイブミラー (jp.archive.ubuntu.com) への ping が成功します。
  下に示す "System conditions" を参照。

(3) 何故、 "Install or Enlist with Ubuntu MAAS Server" の設定で、システムが強制的にパワーオフされるのでしょうか?

(4) 何故、 "ユーザとパスワードのセットアップ" の設定で、 "一般ユーザアカウント" を作成中に、ユーザ名が尋ねられないのでしょうか?

(5) 何故、 "ディスクの検出" の設定で、インストーラはアーカイブミラー (jp.archive.ubuntu.com) からファイルをダウンロードするのに失敗するのでしょうか?

  これは 1. (2) と同様です。

(6) 何故、 "LTSP chroot を構築する" の設定で、インストールステップが失敗するのでしょうか?

  もし、インストール中にネットワーク (eth0) を有効にできれば、それは成功するのでしょうか?

2.  デバイスドライバ (tg3.ko) を "make" (コンパイル、ビルド) して、インストーラにそのドライバをロードさせることが (どうすれば) 可能でしょうか?

(1) 何故、デバイスドライバ (tg3.ko) を "make" (コンパイル、ビルド) するのに失敗するのでしょうか? どうすれば、この問題が解決するのでしょうか?

  いくつかのパッケージが不足しているのでしょうか? もしそうなら、どの追加パッケージをインストールする必要があるのでしょうか?
  下に示す "make conditions" と "make.log" を参照。

(2) "ドライバをリムーバブルメディアからロード" または "ハードウェア製造元からの仮想ドライバディスクの検出" の設定で、インストーラにデバイスドライバ (tg3.ko) をロードさせることが (どうすれば) 可能でしょうか?

  デバイスドライバ (tg3.ko) を (どのように) パッケージ化する必要があるのでしょうか?
  デバイスドライバ (tg3.ko) を外付け USB HDD のパーティションのルートディレクトリにコピーしても、それはロードされませんでした。


Note: 以下の詳細情報を参照。
(to be continued)

オフライン

 

#2 2015-01-26 13:08:51

souhalt
メンバ
登録日: 2015-01-26

Re: どうすれば問題なく Ubuntu サーバをインストールできますか?

(continued)


Note: 英語版については、以下のリンクを参照。

[server] How can we install Ubuntu server without the Problems?
http://ubuntuforums.org/showthread.php?t=2262579

オフライン

 

#3 2015-01-26 13:12:40

souhalt
メンバ
登録日: 2015-01-26

Re: どうすれば問題なく Ubuntu サーバをインストールできますか?

(continued)

* Hardware specifications (for FMV-BIBLO NF/G70)

今までに発表した主な製品(ノートブックPC FMV-BIBLO(ビブロ)NFシリーズ 仕様) - FMVサポート : 富士通
http://www.fmworld.net/fmv/pcpm1001/nf/method/#NFG70


* Download #1 (for ubuntu-14.10-server-amd64)

日本国内のダウンロードサイト | Ubuntu Japanese Team
https://www.ubuntulinux.jp/ubuntu/mirrors#imagemirror
Ubuntu Releases
http://ubuntutym2.u-toyama.ac.jp/ubuntu/
ubuntu-14.10-server-amd64.iso
http://ubuntutym2.u-toyama.ac.jp/ubuntu/14.10/ubuntu-14.10-server-amd64.iso
    ubuntu-14.10-server-amd64.iso         610,271,232 bytes     Ubuntu 14.10 (Utopic Unicorn)

日本国内のダウンロードサイト | Ubuntu Japanese Team
https://www.ubuntulinux.jp/ubuntu/mirrors#archivemirror
Index of /ubuntu
http://ubuntutym.u-toyama.ac.jp/ubuntu/
vmlinuz
http://ubuntutym.u-toyama.ac.jp/ubuntu/dists/utopic/main/installer-amd64/current/images/hd-media/vmlinuz
    vmlinuz         6,403,032 bytes     for utopic (Ubuntu 14.10), amd64, hd-media (FAT32 HDD), not gtk

initrd.gz
http://ubuntutym.u-toyama.ac.jp/ubuntu/dists/utopic/main/installer-amd64/current/images/hd-media/initrd.gz
    initrd.gz     11,849,040 bytes     for utopic (Ubuntu 14.10), amd64, hd-media (FAT32 HDD), not gtk

オフライン

 

#4 2015-01-26 13:16:08

souhalt
メンバ
登録日: 2015-01-26

Re: どうすれば問題なく Ubuntu サーバをインストールできますか?

(continued)

* menu.lst for Grub4dos

# Load grub2 installed in the PBR of /dev/sdb12
title ubuntu-14.10-server-amd64 on (hd?,11)
root (hd1,11) || root (hd0,11)
chainloader +1

title ISO file [\\LINUX\\ubuntu-14.10-server-amd64.iso]
ls /LINUX/ubuntu-14.10-server-amd64.iso || find --set-root --ignore-floppies --ignore-cd /LINUX/ubuntu-14.10-server-amd64.iso
# Use vmlinuz (6,403,032 bytes) for utopic (Ubuntu 14.10), amd64, hd-media (FAT32 HDD), not gtk
# http://ubuntutym.u-toyama.ac.jp/ubuntu/dists/utopic/main/installer-amd64/current/images/hd-media/
#kernel /LINUX/utopic/amd64/hd-media/vmlinuz debian-installer/quiet=false debian-installer/splash=false file=/cdrom/preseed/ubuntu-server.seed vga=788 priority=critical auto=true
#kernel /LINUX/utopic/amd64/hd-media/vmlinuz debian-installer/quiet=false debian-installer/splash=false file=/cdrom/preseed/ubuntu-server.seed vga=788
#kernel /LINUX/utopic/amd64/hd-media/vmlinuz debian-installer/quiet=false debian-installer/splash=false file=/cdrom/preseed/ubuntu-server.seed vga=788 priority=high
#kernel /LINUX/utopic/amd64/hd-media/vmlinuz debian-installer/quiet=false debian-installer/splash=false file=/cdrom/preseed/ubuntu-server.seed vga=788 priority=medium
kernel /LINUX/utopic/amd64/hd-media/vmlinuz debian-installer/quiet=false debian-installer/splash=false file=/cdrom/preseed/ubuntu-server.seed vga=788 priority=low
#kernel /LINUX/utopic/amd64/hd-media/vmlinuz debian-installer/quiet=false debian-installer/splash=false file=/cdrom/preseed/ubuntu-server.seed vga=788 priority=low rescue/enable=true
# Use initrd.gz (11,849,040 bytes) for utopic (Ubuntu 14.10), amd64, hd-media (FAT32 HDD), not gtk
# http://ubuntutym.u-toyama.ac.jp/ubuntu/dists/utopic/main/installer-amd64/current/images/hd-media/
initrd /LINUX/utopic/amd64/hd-media/initrd.gz


* Batch to edit BCD for Grub4dos

@echo off
setlocal enabledelayedexpansion
if "%~1"=="-d" (
    for /F "usebackq tokens=1-2 delims={} " %%F in ("%~n0.log") do (
        set _ST=
        if not "%%~dpF"=="" set _ST= /store "%%~dpFBoot\BCD"
        echo GUID {%%G} to be deleted in "%%~dpFBoot\BCD"
        bcdedit!_ST! /delete {%%G}
    )
    if not !errorlevel!==0 echo Delete "%~n0.log" manually.
) else (
    if "%~dp1"=="" echo Usage: %~n0 [-d^|C:\^|D:\^|..]
    set _ST=
    if not "%~dp1"=="" set _ST= /store "%~dp1Boot\BCD"
    for /F "usebackq tokens=2 delims={}" %%G in (
        `bcdedit!_ST! /create /d "Grub4dos @BT" /application bootsector`
    ) do (
        echo "%~dp1" {%%G}>> "%~n0.log"
        echo GUID {%%G} created in "%~dp1Boot\BCD"
        bcdedit!_ST! /set {%%G} device boot
        bcdedit!_ST! /set {%%G} path "\grldr.mbr"
rem        bcdedit!_ST! /set {bootmgr} displayorder {%%G} /addlast
        bcdedit!_ST! /set {bootmgr} displayorder {%%G} /addfirst
    )
)
endlocal

オフライン

 

#5 2015-01-26 13:20:05

souhalt
メンバ
登録日: 2015-01-26

Re: どうすれば問題なく Ubuntu サーバをインストールできますか?

(continued)

* How to install Ubuntu server from iso file on HDD (main points only)

Warning:

  grub2 が PBR (Partition Boot Record) にインストールされている場合、インストーラが「パーティションを初期化」中にハングアップするかもしれません。
  この場合、GParted などで事前にフォーマットすればハングアップしないかもしれません。

GParted -- Download
http://gparted.org/download.php


-? Choose language
--? Language:
--> Japanese     - 日本語
--? 選択された言語でインストールを続けますか?
--> <はい>
--? 大陸または地域:
--> アジア
--? 国・領土・地域:
--> 日本
--? 追加のロケール:
--> ["ja_JP.EUC-JP" を選択]
--? システムロケール:
--> en_US.UTF-8

-? debconf 事前設定ファイルのロード
[OEM モードにしない場合はスキップ]

-? シェルの実行
~# lspci | grep -i net
18:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)

-? ネットワークハードウェアの検出
--- イーサネットカードが検出されませんでした。 ...
--? イーサネットカードに必要なドライバ:
--> 該当なし
or
--> tg3: Broadcom Tigon3 Gigabit Ethernet     [tg3 の場合]

-? シェルの実行
~# dmesg | grep mdio
[  119.686746] libphy: tg3 mdio bus: probed

-? Ubuntu アーカイブのミラーを選択
--? ファイルをダウンロードするプロトコル:
--> http
--? Ubuntu アーカイブミラーの国:
--> 日本
--? Ubuntu アーカイブミラー:
--> jp.archive.ubuntu.com

-? インストーラコンポーネントのダウンロード
--- インストーラはミラーからファイルをダウンロードするのに失敗しました。 ...
--? ファイルのダウンロード中に失敗しました:
--> キャンセル

-? Install or Enlist with Ubuntu MAAS Server
[スキップ、さもなければ何故か強制的にパワーオフ]

-? ユーザとパスワードのセットアップ
--? シャドーパスワードを有効にしますか?
--> <はい>
--? root でのログインを許可しますか?
--> <はい>
--? ここで一般ユーザアカウントを作成しますか?
--> <いいえ>

-? ディスクの検出
--- インストーラはミラーからファイルをダウンロードするのに失敗しました。 ...
--? ファイルのダウンロード中に失敗しました:
--> キャンセル

-? システムのインストール
--? インストールの種類:
--> 通常
--? インストールするカーネル:
--> linux-generic     [linux-headers-* が含まれる]
--? initrd に含めるドライバ:
--> 汎用: すべての利用可能なドライバを含む

[OEM モードでなければ以下のように実行]
-? シェルの実行
~# nano /etc/network/interfaces     [以下のように編集]
>
> auto eth0
> iface eth0 inet dhcp
~# cp /etc/network/interfaces /target/etc/network/interfaces
~# cmp /lib/modules/3.16.0-23-generic/kernel/drivers/net/ethernet/broadcom/tg3.ko /target/lib/modules/3.16.0-23-generic/kernel/drivers/net/ethernet/broadcom/tg3.ko

-? ソフトウェアの選択とインストール
--? このシステムのアップグレードをどのように管理しますか?
--> 自動的にアップデートしない
--? 言語サポートをダウンロードしますか?
--> <はい>
--? Choose software to install:     [インストールするソフトウェアの選択:]
--> ["Mail server" を除いた項目を選択]

-? LTSP chroot を構築する
--? LTSP chroot 環境を設定しますか?
--> <はい>
--- インストールステップが失敗しました。 ...
--> <続ける>

オフライン

 

#6 2015-01-26 13:23:48

souhalt
メンバ
登録日: 2015-01-26

Re: どうすれば問題なく Ubuntu サーバをインストールできますか?

(continued)

* Boot conditions

-? Ubuntu
-> Enter     [to boot]
-> Ctrl+Alt+F1     [if the login prompt has not displayed]
-> Alt+PrtSc+R+S+E+I+U+B     [only if the system is frozen]
-? login:


* System conditions (for Broadcom 57780;tg3, 3.16.0-23-generic)

~# lspci | grep -i net
18:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
~# lshw -C network | grep driver
       configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.137 duplex=full firmware=sb ip=192.168.0.3 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s
~# ping -c 4 jp.archive.ubuntu.com     [OK]
~# uname -srvmpio
Linux 3.16.0-23-generic #31-Ubuntu SMP Tue Oct 21 17:56:17 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux

オフライン

 

#7 2015-01-26 13:28:05

souhalt
メンバ
登録日: 2015-01-26

Re: どうすれば問題なく Ubuntu サーバをインストールできますか?

(continued)

* Download #2 (for Broadcom 57780;tg3)

ホーム | Broadcom
http://ja.broadcom.com/
Ethernet NIC Driver Downloads | Broadcom
http://ja.broadcom.com/support/ethernet_nic/downloaddrivers.php
> NetLink 57xx
> Download drivers for the following current generation Ethernet chipsets:
> 5784, 5785, 57780, 57781, 57785, 57785x, 57788, 57790, 57791, 57795
Ethernet NIC NetLink Driver Downloads | Broadcom
http://ja.broadcom.com/support/ethernet_nic/netlink_k57.php
> Below you will find the latest drivers for Broadcom's NetLink Ethernet controllers:
> 5784, 5785, 57780, 57781, 57785, 57790, 57795
> Linux (tg3)        3.136h        08/19/14
Download Zip File
http://ja.broadcom.com/support/license.php?file=570x/linux-3.136h.zip
    linux-3.136h.zip                3,701,883 bytes
unzip->    tg3-3.136h.tar.gz                359,234 bytes


* make conditions (for 3.16.0-23-generic)

~# aptitude update
~# aptitude install make
~# aptitude install gcc
~# aptitude safe-upgrade linux-headers-3.16.0-23-generic     [0 packages updated]
~# aptitude safe-upgrade linux-headers-3.16.0-23         [0 packages updated]

~# make clean
~# make > make.log 2>&1


* make.log (for Broadcom 57780;tg3, 3.16.0-23-generic)

sh makeflags.sh /lib/modules/3.16.0-23-generic/build  > tg3_flags.h
make -C /lib/modules/3.16.0-23-generic/build SUBDIRS=/home/ubuntu/tg3-3.136h modules
make[1]: Entering directory '/usr/src/linux-headers-3.16.0-23-generic'
  CC [M]  /home/ubuntu/tg3-3.136h/tg3.o
/home/ubuntu/tg3-3.136h/tg3.c:15159:2: error: unknown field ‘get_rxfh_indir’ specified in initializer
  .get_rxfh_indir  = tg3_get_rxfh_indir,
  ^
/home/ubuntu/tg3-3.136h/tg3.c:15159:2: warning: initialization from incompatible pointer type
/home/ubuntu/tg3-3.136h/tg3.c:15159:2: warning: (near initialization for ‘tg3_ethtool_ops.get_rxfh’)
/home/ubuntu/tg3-3.136h/tg3.c:15160:2: error: unknown field ‘set_rxfh_indir’ specified in initializer
  .set_rxfh_indir  = tg3_set_rxfh_indir,
  ^
/home/ubuntu/tg3-3.136h/tg3.c:15160:2: warning: initialization from incompatible pointer type
/home/ubuntu/tg3-3.136h/tg3.c:15160:2: warning: (near initialization for ‘tg3_ethtool_ops.set_rxfh’)
scripts/Makefile.build:263: recipe for target '/home/ubuntu/tg3-3.136h/tg3.o' failed
make[2]: *** [/home/ubuntu/tg3-3.136h/tg3.o] Error 1
Makefile:1345: recipe for target '_module_/home/ubuntu/tg3-3.136h' failed
make[1]: *** [_module_/home/ubuntu/tg3-3.136h] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-3.16.0-23-generic'
Makefile:91: recipe for target 'default' failed
make: *** [default] Error 2

(end of the detailed informations)

オフライン

 

#8 2015-02-19 18:05:01

souhalt
メンバ
登録日: 2015-01-26

Re: どうすれば問題なく Ubuntu サーバをインストールできますか?

> それは Trusty と同じですか?

インストーラの動作については、それはほとんど Trusty と同じでした。
tg3 がデバイスドライバに含まれていなかったことによる相違点を除いて。

以前、 Trusty で同じことをしようとしました (Utopic でそれをしようとする前に) 。
Trusty のファイルは次のようにダウンロードしました。


* Download #1a (for ubuntu-14.04.1-server-amd64)

https://www.ubuntulinux.jp/ubuntu/mirrors#imagemirror
Ubuntu Releases
http://ubuntutym2.u-toyama.ac.jp/ubuntu/
ubuntu-14.04.1-server-amd64.iso
http://ubuntutym2.u-toyama.ac.jp/ubuntu/14.04.1/ubuntu-14.04.1-server-amd64.iso
    ubuntu-14.04.1-server-amd64.iso         599,785,472 bytes     Ubuntu 14.04.1 LTS (Trusty Tahr)

https://www.ubuntulinux.jp/ubuntu/mirrors#archivemirror
Index of /ubuntu
http://ubuntutym.u-toyama.ac.jp/ubuntu/
vmlinuz
http://ubuntutym.u-toyama.ac.jp/ubuntu/dists/trusty/main/installer-amd64/current/images/hd-media/vmlinuz
    vmlinuz         5,778,968 bytes     for trusty (Ubuntu 14.04), amd64, hd-media (FAT32 HDD), not gtk

initrd.gz
http://ubuntutym.u-toyama.ac.jp/ubuntu/dists/trusty/main/installer-amd64/current/images/hd-media/initrd.gz
    initrd.gz     11,973,467 bytes     for trusty (Ubuntu 14.04), amd64, hd-media (FAT32 HDD), not gtk

オフライン

 

#9 2015-02-19 18:06:12

souhalt
メンバ
登録日: 2015-01-26

Re: どうすれば問題なく Ubuntu サーバをインストールできますか?

iso ファイルを焼いたブータブル DVD については、それはほとんど同じでした。

"Ubuntu desktop" のインストーラについては、インストールが問題なく成功しました。

オフライン

 

#10 2015-02-19 18:07:39

souhalt
メンバ
登録日: 2015-01-26

Re: どうすれば問題なく Ubuntu サーバをインストールできますか?

Note: 代替英語版については、以下のリンクを参照。

Question #261294 : Questions : Ubuntu
https://answers.launchpad.net/ubuntu/+question/261294
How can we install Ubuntu server without the Problems?

オフライン

 

#11 2015-02-22 08:03:14

souhalt
メンバ
登録日: 2015-01-26

Re: どうすれば問題なく Ubuntu サーバをインストールできますか?

Note: 以下の関連リンクを参照。

日本語版:

Ubuntu日本語フォーラム / どうすれば問題なく Ubuntu サーバをインストールできますか?
How can we install Ubuntu server without the Problems?
https://forums.ubuntulinux.jp/viewtopic.php?id=17263
https://forums.ubuntulinux.jp/viewtopic.php?pid=107308

代替英語版:

Question #261294 : Questions : Ubuntu
https://answers.launchpad.net/ubuntu/+question/261294

and

Bug #1423419 “We can not install Ubuntu server without the Probl...” : Bugs : Ubuntu
https://bugs.launchpad.net/ubuntu/+bug/1423419

参考英語版:

How can we install Ubuntu server without the Problems? - Ask Ubuntu
https://archive.today/y0Hhi

オフライン

 

#12 2015-02-22 12:55:59

katsu07
ゲスト

Re: どうすれば問題なく Ubuntu サーバをインストールできますか?

試しに別のバージョンで確認してみては?

ubuntu 14.04.1 serverのisoでインストールしてみる。(カーネル3.13系)
これで正常にインストールの段階でBCM57780が検出されるなら、ubuntu 14.10 serverのisoに含まれるカーネルに問題がありそう。

ubuntu 14.04.2 serverのisoでインストールしてみる。(カーネル3.16系)
これで正常にインストールの段階でBCM57780が検出されるなら、ubuntu 14.10 serverのisoに含まれるカーネル以外に問題がありそう。

どちらのserverのisoでも同じ様にBCM57780がインストーラーで検出できない場合。
この場合は予想がつきません

 

#13 2015-02-22 19:40:14

souhalt
メンバ
登録日: 2015-01-26

Re: どうすれば問題なく Ubuntu サーバをインストールできますか?

> 試しに別のバージョンで確認してみては?
>
> ubuntu 14.04.1 serverのisoでインストールしてみる。(カーネル3.13系)
> これで正常にインストールの段階でBCM57780が検出されるなら、ubuntu 14.10 serverのisoに含まれるカーネルに問題がありそう。
>
> ubuntu 14.04.2 serverのisoでインストールしてみる。(カーネル3.16系)
> これで正常にインストールの段階でBCM57780が検出されるなら、ubuntu 14.10 serverのisoに含まれるカーネル以外に問題がありそう。
>
> どちらのserverのisoでも同じ様にBCM57780がインストーラーで検出できない場合。
> この場合は予想がつきません

回答ありがとうございます。 >> katsu07

ubuntu-14.04.2-server-amd64.iso (Trusty 14.04.2) でインストールしてみました。
でも、それは以前試した ubuntu-14.04.1-server-amd64.iso (Trusty 14.04.1) とほとんど同じ結果でした。

情報ありがとうございました。 >> katsu07
Trusty 14.04.2 がリリースされたことには気付いていませんでした。 :)

オフライン

 

#14 2015-06-01 18:10:21

hayabusa34
新しいメンバ
登録日: 2015-06-01

Re: どうすれば問題なく Ubuntu サーバをインストールできますか?

はじめまして.インストールで困っていて色々探しているウチにここに辿り着きました.

> (1) 何故、 "ネットワークハードウェアの検出" の設定で、イーサネットコントローラ (Broadcom 57780) が検出されず、デバイスドライバ (tg3.ko) が使用されないのでしょうか?
> 2.  デバイスドライバ (tg3.ko) を "make" (コンパイル、ビルド) して、インストーラにそのドライバをロードさせることが (どうすれば) 可能でしょうか?

見たところ,私とほとんど同じ症状に思えるのですが,結局,こちらの問題は解決策が出ていないのでしょうか?

オフライン

 

#15 2015-06-02 09:07:24

souhalt
メンバ
登録日: 2015-01-26

Re: どうすれば問題なく Ubuntu サーバをインストールできますか?

> はじめまして.インストールで困っていて色々探しているウチにここに辿り着きました.
>
> > (1) 何故、 "ネットワークハードウェアの検出" の設定で、イーサネットコントローラ (Broadcom 57780) が検出されず、デバイスドライバ (tg3.ko) が使用されないのでしょうか?
> > 2.  デバイスドライバ (tg3.ko) を "make" (コンパイル、ビルド) して、インストーラにそのドライバをロードさせることが (どうすれば) 可能でしょうか?
>
> 見たところ,私とほとんど同じ症状に思えるのですが,結局,こちらの問題は解決策が出ていないのでしょうか?

>> hayabusa34

解決策が出ていません。

* 暫定対策

次のリンクなどに示す、前述のトリッキーな手順を踏めば、一応インストールしてネットワークに接続することは可能です。

Ubuntu日本語フォーラム / どうすれば問題なく Ubuntu サーバをインストールできますか?
https://forums.ubuntulinux.jp/viewtopic.php?pid=107306#p107306

* 恒久対策

下記リンクなどを通じ、多数の人が直接 "Ubuntu Server Team" (Development Team) に修正要求を出せば、今後の版で改善されるかもしれません。

Ubuntu日本語フォーラム / どうすれば問題なく Ubuntu サーバをインストールできますか?
https://forums.ubuntulinux.jp/viewtopic.php?pid=107685#p107685

Questions : Ubuntu
https://answers.launchpad.net/ubuntu/
Bugs : Ubuntu
https://bugs.launchpad.net/ubuntu/

メーリングリスト:
ubuntu-server Info Page
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server
http://news.gmane.org/gmane.linux.ubuntu.server

参考:
Ubuntu Forums
http://ubuntuforums.org/
Ask Ubuntu
http://askubuntu.com/

オフライン

 

#16 2015-06-02 09:44:45

hayabusa34
新しいメンバ
登録日: 2015-06-01

Re: どうすれば問題なく Ubuntu サーバをインストールできますか?

返信ありがとうございました.不思議な状況ですね.

オフライン

 

Board footer

Powered by FluxBB