お知らせ

  • 利用規約を守って投稿してください。また、よくある質問および投稿の手引きも参照してください。
  • メッセージの投稿にはアカウントが必要です。未登録の方は、ユーザ登録ページからアカウントを作成することができます。

#1 2008-04-20 13:55:54

fwht0097
メンバ
登録日: 2006-10-26

virtualboxがうまく起動できません。

Synapticでvirtualboxをインストールしたのですが
下記のようなメッセージが出て起動できません。

VirtualBox kernel driver not installed. The vboxdrv kernel module was either not loaded or /dev/vboxdrv was not created for some reason. Please install the virtualbox-ose-modules package for your kernel and execute '/etc/init.d/vboxdrv start' as root.
VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).

メッセージに書いてあるvirtualbox-ose-modules は virtualbox-ose modules for linux-image-2.6.22-14-generic
がSynapticで自動的にインストールされています。

なにかおかしいのでしょうか?
どなたかお教え願います。

オフライン

 

#2 2008-04-20 14:30:43

vine_user
メンバ
From: Tokyo
登録日: 2006-11-15

Re: virtualboxがうまく起動できません。

エラーメッセージに書いてあるコマンドは実行してみましたか?

$ sudo /etc/init.d/vboxdrv start

再起動すればコマンドを打たなくてもvboxdrvが読み込まれると思いますが…。

オフライン

 

#3 2008-04-20 14:45:22

fwht0097
メンバ
登録日: 2006-10-26

Re: virtualboxがうまく起動できません。

レスありがとうございます。

やってみた結果は下記のとおりです。

hogehoge@hogehoge-desktop:~$ sudo /etc/init.d/vboxdrv start
[sudo] password for hogehoge:
* Starting VirtualBox kernel module vboxdrv                                    FATAL: Module vboxdrv not found.

* Modprobe vboxdrv failed. Please use 'dmesg' to find out why.

それでdmesgの結果は
下記のとおりです。
どこにvirtualbox起動に関係するメッセージがあるのかわからないです。
ご教授ねがいます。

[    0.000000] Linux version 2.6.22-14-386 (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 Tue Feb 12 07:12:19 UTC 2008 (Ubuntu 2.6.22-14.52-386)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003bef0000 (usable)
[    0.000000]  BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003c000000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 62MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f3a80
[    0.000000] Entering add_active_range(0, 0, 245488) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   245488
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   245488
[    0.000000] On node 0 totalpages: 245488
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 125 pages used for memmap
[    0.000000]   HighMem zone: 15987 pages, LIFO batch:3
[    0.000000] DMI 2.2 present.
[    0.000000] ACPI: RSDP signature @ 0xC00F7BD0 checksum 0
[    0.000000] ACPI: RSDP 000F7BD0, 0014 (r0 Nvidia)
[    0.000000] ACPI: RSDT 3BEF3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: FACP 3BEF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: DSDT 3BEF3180, 4EEB (r1 NVIDIA AWRDACPI     1000 MSFT  100000E)
[    0.000000] ACPI: FACS 3BEF0000, 0040
[    0.000000] ACPI: SSDT 3BEF8180, 0188 (r1 PTLTD  POWERNOW        1  LTP        1)
[    0.000000] ACPI: MCFG 3BEF8380, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] ACPI: APIC 3BEF80C0, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD        0)
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:11 APIC version 16
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:11 APIC version 16
[    0.000000] WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[    0.000000] Built 1 zonelists.  Total pages: 243571
[    0.000000] Kernel command line: root=UUID=258cc203-6e75-4140-ad5f-823b2c35571f ro quiet splash locale=ja_JP
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 2009.296 MHz processor.
[   22.863011] spurious 8259A interrupt: IRQ7.
[   22.864211] Console: colour VGA+ 80x25
[   22.864524] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   22.864877] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   22.879357] Memory: 962448k/981952k available (1929k kernel code, 18784k reserved, 876k data, 348k init, 64448k highmem)
[   22.879366] virtual kernel memory layout:
[   22.879367]     fixmap  : 0xfffa8000 - 0xfffff000   ( 348 kB)
[   22.879368]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   22.879369]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   22.879371]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   22.879372]       .init : 0xc03c0000 - 0xc0417000   ( 348 kB)
[   22.879373]       .data : 0xc02e2655 - 0xc03bda04   ( 876 kB)
[   22.879374]       .text : 0xc0100000 - 0xc02e2655   (1929 kB)
[   22.879377] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   22.879415] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   22.959338] Calibrating delay using timer specific routine.. 4022.07 BogoMIPS (lpj=8044147)
[   22.959359] Security Framework v1.0.0 initialized
[   22.959365] SELinux:  Disabled at boot.
[   22.959370] Mount-cache hash table entries: 512
[   22.959453] CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
[   22.959460] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   22.959462] CPU: L2 Cache: 512K (64 bytes/line)
[   22.959464] CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
[   22.959472] Compat vDSO mapped to ffffe000.
[   22.959481] CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
[   22.959485] Checking 'hlt' instruction... OK.
[   22.975772] Early unpacking initramfs... done
[   23.248845] ACPI: Core revision 20070126
[   23.248901] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   23.255525] ENABLING IO-APIC IRQs
[   23.255761] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[   23.402879] Booting paravirtualized kernel on bare hardware
[   23.402933] Time: 13:17:22  Date: 03/20/108
[   23.402951] NET: Registered protocol family 16
[   23.403011] EISA bus registered
[   23.403021] ACPI: bus type pci registered
[   23.409440] PCI: PCI BIOS revision 3.00 entry at 0xfa7e0, last bus=4
[   23.409442] PCI: Using configuration type 1
[   23.409443] Setting up standard PCI resources
[   23.412347] ACPI: EC: Look up EC in DSDT
[   23.418780] ACPI: Interpreter enabled
[   23.418782] ACPI: (supports S0 S1 S4 S5)
[   23.418795] ACPI: Using IOAPIC for interrupt routing
[   23.427847] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   23.427853] PCI: Probing PCI hardware (bus 00)
[   23.428809] PCI: Transparent bridge - 0000:00:10.0
[   23.428840] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   23.429093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[   23.525108] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   23.525270] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   23.525431] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
[   23.525591] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
[   23.525751] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
[   23.525910] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   23.526070] ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15)
[   23.526229] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   23.526389] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[   23.526548] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   23.526713] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
[   23.526874] ACPI: PCI Interrupt Link [LACI] (IRQs *5 7 9 10 11 14 15)
[   23.527033] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   23.527194] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 *10 11 14 15)
[   23.527354] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   23.527514] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[   23.527674] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[   23.527839] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   23.528000] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[   23.528165] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[   23.528363] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[   23.528548] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[   23.528732] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[   23.528916] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[   23.529100] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[   23.529283] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[   23.529471] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[   23.529655] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[   23.529840] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[   23.530025] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[   23.530209] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[   23.530394] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[   23.530578] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0
[   23.530765] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
[   23.530950] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[   23.531136] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[   23.531321] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[   23.531506] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[   23.531692] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[   23.531877] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[   23.532062] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[   23.532143] Linux Plug and Play Support v0.97 (c) Adam Belay
[   23.532151] pnp: PnP ACPI init
[   23.532157] ACPI: bus type pnp registered
[   23.537077] pnp: PnP ACPI: found 15 devices
[   23.537079] ACPI: ACPI bus type pnp unregistered
[   23.537082] PnPBIOS: Disabled by ACPI PNP
[   23.537111] PCI: Using ACPI for IRQ routing
[   23.537114] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   23.630749] NET: Registered protocol family 8
[   23.630750] NET: Registered protocol family 20
[   23.630792] pnp: 00:01: ioport range 0x1000-0x107f has been reserved
[   23.630794] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
[   23.630797] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
[   23.630799] pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
[   23.630802] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
[   23.630804] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
[   23.630807] pnp: 00:01: ioport range 0x2000-0x207f has been reserved
[   23.630809] pnp: 00:01: ioport range 0x2080-0x20ff has been reserved
[   23.630813] pnp: 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved
[   23.630815] pnp: 00:01: iomem range 0x3c000000-0x3fffffff could not be reserved
[   23.630823] pnp: 00:0d: iomem range 0xf0000000-0xf3ffffff could not be reserved
[   23.630827] pnp: 00:0e: iomem range 0xcde00-0xcffff has been reserved
[   23.630830] pnp: 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
[   23.630832] pnp: 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
[   23.630835] pnp: 00:0e: iomem range 0xfc000-0xfffff could not be reserved
[   23.634545] Time: tsc clocksource has been installed.
[   23.660996] PCI: Bridge: 0000:00:02.0
[   23.660998]   IO window: 8000-8fff
[   23.661000]   MEM window: efe00000-efefffff
[   23.661003]   PREFETCH window: efc00000-efcfffff
[   23.661005] PCI: Bridge: 0000:00:03.0
[   23.661007]   IO window: a000-afff
[   23.661010]   MEM window: efb00000-efbfffff
[   23.661012]   PREFETCH window: efa00000-efafffff
[   23.661015] PCI: Bridge: 0000:00:04.0
[   23.661017]   IO window: 9000-9fff
[   23.661019]   MEM window: ec000000-eeffffff
[   23.661021]   PREFETCH window: c0000000-cfffffff
[   23.661024] PCI: Bridge: 0000:00:10.0
[   23.661026]   IO window: b000-bfff
[   23.661029]   MEM window: efd00000-efdfffff
[   23.661032]   PREFETCH window: e4000000-e7ffffff
[   23.661043] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   23.661048] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   23.661054] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   23.661061] PCI: Setting latency timer of device 0000:00:10.0 to 64
[   23.661071] NET: Registered protocol family 2
[   23.698485] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   23.698574] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   23.699237] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[   23.699417] TCP: Hash tables configured (established 131072 bind 65536)
[   23.699419] TCP reno registered
[   23.710559] checking if image is initramfs... it is
[   24.161929] Switched to high resolution mode on CPU 0
[   24.244872] Freeing initrd memory: 6742k freed
[   24.245125] audit: initializing netlink socket (disabled)
[   24.245135] audit(1208697442.260:1): initialized
[   24.245174] highmem bounce pool size: 64 pages
[   24.246351] VFS: Disk quotas dquot_6.5.1
[   24.246360] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   24.246423] io scheduler noop registered
[   24.246425] io scheduler anticipatory registered
[   24.246426] io scheduler deadline registered
[   24.246438] io scheduler cfq registered (default)
[   32.235352] 0000:00:0b.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[   32.235364] Boot video device is 0000:03:00.0
[   32.235426] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   32.235446] assign_interrupt_mode Found MSI capability
[   32.235449] Allocate Port Service[0000:00:02.0:pcie00]
[   32.235494] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   32.235513] assign_interrupt_mode Found MSI capability
[   32.235515] Allocate Port Service[0000:00:03.0:pcie00]
[   32.235556] PCI: Setting latency timer of device 0000:00:04.0 to 64
[   32.235575] assign_interrupt_mode Found MSI capability
[   32.235577] Allocate Port Service[0000:00:04.0:pcie00]
[   32.235655] isapnp: Scanning for PnP cards...
[   32.588317] isapnp: No Plug & Play device found
[   32.604705] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   32.604806] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   32.604942] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   32.605363] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   32.605823] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   32.605963] input: Macintosh mouse button emulation as /class/input/input0
[   32.606012] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   32.608893] serio: i8042 KBD port at 0x60,0x64 irq 1
[   32.608897] serio: i8042 AUX port at 0x60,0x64 irq 12
[   32.608998] mice: PS/2 mouse device common for all mice
[   32.609069] EISA: Probing bus 0 at eisa.0
[   32.609075] Cannot allocate resource for EISA slot 1
[   32.609078] Cannot allocate resource for EISA slot 2
[   32.609092] Cannot allocate resource for EISA slot 8
[   32.609093] EISA: Detected 0 cards.
[   32.609166] TCP cubic registered
[   32.609176] NET: Registered protocol family 1
[   32.609194] Using IPI Shortcut mode
[   32.609352]   Magic number: 4:587:281
[   32.609374]   hash matches device ttyy9
[   32.609383]   hash matches device ttyvc
[   32.609454]   hash matches device tty18
[   32.609668] Freeing unused kernel memory: 348k freed
[   32.703088] input: AT Translated Set 2 keyboard as /class/input/input1
[   33.809810] fuse init (API version 7.8)
[   33.814325] Capability LSM initialized
[   33.817590] ACPI: Fan [FAN] (on)
[   33.822566] ACPI: Thermal Zone [THRM] (40 C)
[   34.449889] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   34.449895] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   34.450314] NFORCE-MCP51: IDE controller at PCI slot 0000:00:0d.0
[   34.450334] NFORCE-MCP51: chipset revision 161
[   34.450336] NFORCE-MCP51: not 100% native mode: will probe irqs later
[   34.450343] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
[   34.450350]     ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA
[   34.450361]     ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:DMA, hdd:DMA
[   34.450367] Probing IDE interface ide0...
[   34.470706] SCSI subsystem initialized
[   34.492514] libata version 2.21 loaded.
[   34.505958] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[   34.539608] usbcore: registered new interface driver usbfs
[   34.539628] usbcore: registered new interface driver hub
[   34.539643] usbcore: registered new device driver usb
[   34.540156] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   34.632415] Floppy drive(s): fd0 is 1.44M
[   34.690301] FDC 0 is a post-1991 82077
[   34.760182] hda: Maxtor 4R160L0, ATA DISK drive
[   35.431486] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   35.451410] Probing IDE interface ide1...
[   36.186329] hdc: PIONEER DVD-RW DVR-112, ATAPI CD/DVD-ROM drive
[   36.522229] ide1 at 0x170-0x177,0x376 on irq 15
[   36.527118] sata_nv 0000:00:0e.0: version 3.4
[   36.527457] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[   36.527468] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 16
[   36.527503] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   36.527562] scsi0 : sata_nv
[   36.527737] scsi1 : sata_nv
[   36.527867] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001e000 irq 16
[   36.527871] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001e008 irq 16
[   36.534896] hda: max request size: 512KiB
[   36.542247] hda: 320173056 sectors (163928 MB) w/2048KiB Cache, CHS=19929/255/63, UDMA(133)
[   36.542412] hda: cache flushes supported
[   36.542446]  hda: hda1 hda2 < hda5 >
[   36.609573] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(66)
[   36.609582] Uniform CD-ROM driver Revision: 3.20
[   36.837397] ata1: SATA link down (SStatus 0 SControl 300)
[   36.854961] Attempting manual resume
[   36.854964] swsusp: Resume From Partition 3:5
[   36.854965] PM: Checking swsusp image.
[   36.855090] PM: Resume from disk failed.
[   36.917795] kjournald starting.  Commit interval 5 seconds
[   36.917804] EXT3-fs: mounted filesystem with ordered data mode.
[   37.156973] ata2: SATA link down (SStatus 0 SControl 300)
[   37.167781] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[   37.167792] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 17
[   37.167833] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[   37.167873] scsi2 : sata_nv
[   37.167913] scsi3 : sata_nv
[   37.167965] ata3: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma 0x0001cc00 irq 17
[   37.167968] ata4: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma 0x0001cc08 irq 17
[   37.476562] ata3: SATA link down (SStatus 0 SControl 300)
[   37.796149] ata4: SATA link down (SStatus 0 SControl 300)
[   37.807047] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[   37.807058] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 18
[   37.807064] PCI: Setting latency timer of device 0000:00:14.0 to 64
[   37.807072] forcedeth: using HIGHDMA
[   38.323736] eth0: forcedeth.c: subsystem: 0105b:0caf bound to 0000:00:14.0
[   38.324226] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[   38.324237] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 19
[   38.324249] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   38.324252] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[   38.324413] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[   38.324430] ohci_hcd 0000:00:0b.0: irq 19, io mem 0xeffff000
[   38.381468] usb usb1: configuration #1 chosen from 1 choice
[   38.381489] hub 1-0:1.0: USB hub found
[   38.381497] hub 1-0:1.0: 8 ports detected
[   38.483795] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
[   38.483799] ACPI: PCI Interrupt 0000:00:0b.1[b] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 16
[   38.483810] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[   38.483813] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[   38.483832] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[   38.483858] ehci_hcd 0000:00:0b.1: debug port 1
[   38.483861] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[   38.483868] ehci_hcd 0000:00:0b.1: irq 16, io mem 0xefffe000
[   38.483875] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   38.483926] usb usb2: configuration #1 chosen from 1 choice
[   38.483943] hub 2-0:1.0: USB hub found
[   38.483949] hub 2-0:1.0: 8 ports detected
[   38.587573] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[   38.587584] ACPI: PCI Interrupt 0000:04:06.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 20
[   38.637340] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[efdff000-efdff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   39.905484] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00016c2000100b38]
[   47.791446] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   47.794781] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   48.166380] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[   48.166406] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[   48.322352] NET: Registered protocol family 17
[   48.380012] Linux agpgart interface v0.102 (c) Dave Jones
[   48.930897] Real Time Clock Driver v1.12ac
[   48.945708] input: PC Speaker as /class/input/input2
[   48.970568] nvidia: module license 'NVIDIA' taints kernel.
[   49.301666] Linux video capture interface: v2.00
[   49.326612] PCI: Enabling device 0000:00:05.0 (0000 -> 0002)
[   49.326958] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[   49.326969] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 21
[   49.326977] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   49.327461] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[   49.327463] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 21
[   49.327468] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   49.327673] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
[   49.337117] irda_init()
[   49.337138] NET: Registered protocol family 23
[   49.910927] input: ImExPS/2 Generic Explorer Mouse as /class/input/input3
[   49.917142] parport_pc 00:0a: reported by Plug and Play ACPI
[   49.917196] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   50.014538] ivtv:  ==================== START INIT IVTV ====================
[   50.014543] ivtv:  version 1.0.0 (2.6.22-14-386 mod_unload 486 ) loading
[   50.014612] ivtv0: Autodetected I/O Data GV-MVP/RX, GV-MVP/RX2W (dual tuner) card (cx23416 based)
[   50.014987] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[   50.014997] ACPI: PCI Interrupt 0000:04:09.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 22
[   50.015012] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[   50.670597] ivtv0: unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
[   50.670602] ivtv0: did you put the firmware in the hotplug firmware directory?
[   50.670605] ivtv0: Retry loading firmware
[   51.284526] ivtv0: unable to open firmware v4l-cx2341x-enc.fw (must be 376836 bytes)
[   51.284531] ivtv0: did you put the firmware in the hotplug firmware directory?
[   51.284534] ivtv0: Error initializing firmware
[   51.284573] ivtv0: Error -19 on initialization
[   51.284935] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[   51.284939] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 17
[   51.284957] PCI: Setting latency timer of device 0000:00:10.2 to 64
[   51.284987] ivtv:  ====================  END INIT IVTV  ====================
[   51.606221] intel8x0_measure_ac97_clock: measured 54724 usecs
[   51.606225] intel8x0: clocking to 46906
[   52.351813] lp0: using parport0 (interrupt-driven).
[   52.413981] Adding 2835432k swap on /dev/hda5.  Priority:-1 extents:1 across:2835432k
[   52.914881] EXT3 FS on hda1, internal journal
[   55.610668] No dock devices found.
[   55.708521] input: Power Button (FF) as /class/input/input4
[   55.711928] ACPI: Power Button (FF) [PWRF]
[   55.745084] input: Power Button (CM) as /class/input/input5
[   55.748436] ACPI: Power Button (CM) [PWRB]
[   56.028687] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00)
[   56.028719] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x8
[   56.028722] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xa
[   56.028724] powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
[   59.293842] Capability LSM initialized
[   62.764899] ppdev: user-space parallel port driver
[   67.669984] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   67.669988] apm: overridden by ACPI.
[   68.167430] Installing knfsd (copyright (C) 1996 [email protected]).
[   68.809224] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   68.851659] NFSD: starting 90-second grace period
[   46.776000] Marking TSC unstable due to: cpufreq changes.
[   46.780000] Time: acpi_pm clocksource has been installed.
[   47.180000] Clocksource tsc unstable (delta = -204001415 ns)
[   57.096000] Bluetooth: Core ver 2.11
[   57.096000] NET: Registered protocol family 31
[   57.096000] Bluetooth: HCI device and connection manager initialized
[   57.096000] Bluetooth: HCI socket layer initialized
[   57.284000] Bluetooth: L2CAP ver 2.8
[   57.284000] Bluetooth: L2CAP socket layer initialized
[   57.452000] Bluetooth: RFCOMM socket layer initialized
[   57.452000] Bluetooth: RFCOMM TTY layer initialized
[   57.452000] Bluetooth: RFCOMM ver 1.8

オフライン

 

#4 2008-04-20 16:55:43

vine_user
メンバ
From: Tokyo
登録日: 2006-11-15

Re: virtualboxがうまく起動できません。

VirtualBoxをインストールした後に,カーネルをアップデートしてませんか?

$ sudo /etc/init.d/vboxdrv setup
$ sudo /etc/init.d/vboxdrv restart

を試してみて下さい。

<訂正>
Ubuntuのvirtualbox-oseでは,setupオプションがないようです。
本家からUbuntu7.10バージョンを入れるか,Automatics2のものを入れ直してみてはいかがでしょうか?

http://www.virtualbox.org/wiki/Downloads

最後の編集者: vine_user (2008-04-20 17:13:49)

オフライン

 

Board footer

Powered by FluxBB