お知らせ

  • 利用規約を守って投稿してください。また、よくある質問および投稿の手引きも参照してください。
  • メッセージの投稿にはアカウントが必要です。未登録の方は、ユーザ登録ページからアカウントを作成することができます。

#1 2021-01-22 00:05:20

nahoko
メンバ
登録日: 2020-11-05

root でXを開始する方法は?

$ sudo dpkg-reconfigure xserver-xorg-legacy
「誰でも」にして
$ sudo chmod +x /root/.xinitrc
root で startx
mate 開始されない
$ less /var/log/Xorg.0.log

[   107.903]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[   107.904] Build Operating System: Linux 4.19.0-12-amd64 x86_64 Debian
[   107.905] Current Operating System: Linux kyo 4.19.0-13-amd64 #1 SMP Debian 4.19.160-2 (2020-11-28) x86_64
[   107.905] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-4.19.0-13-amd64 root=UUID=cf82c300-5af6-45d6-a682-1e93b9105cae ro rootflags=subvol=@ quiet net.ifnames=0
[   107.906] Build Date: 01 December 2020  05:59:57PM
[   107.907] xorg-server 2:1.20.4-1+deb10u2 (https://www.debian.org/support)
[   107.907] Current version of pixman: 0.36.0
[   107.908]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   107.908] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   107.918] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 21 23:36:48 2021
[   107.942] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   107.948] (==) No Layout section.  Using the first Screen section.
[   107.948] (==) No screen section available. Using defaults.
[   107.948] (**) |-->Screen "Default Screen Section" (0)
[   107.948] (**) |   |-->Monitor "<default monitor>"
[   107.949] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[   107.949] (==) Automatically adding devices
[   107.949] (==) Automatically enabling devices
[   107.949] (==) Automatically adding GPU devices
[   107.949] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   107.982] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
:
[   107.982]    Entry deleted from font path.
[   108.002] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        built-ins
[   108.002] (==) ModulePath set to "/usr/lib/xorg/modules"
[   108.002] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[   108.002] (II) Loader magic: 0x55e26aa43e20
[   108.002] (II) Module ABI versions:
[   108.002]    X.Org ANSI C Emulation: 0.4
[   108.002]    X.Org Video Driver: 24.0
[   108.002]    X.Org XInput driver : 24.1
[   108.002]    X.Org Server Extension : 10.0
[   108.004] (++) using VT number 1

[   108.010] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[   108.011] (II) xfree86: Adding drm device (/dev/dri/card0)
[   108.012] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[   108.017] (--) PCI:*(0@0:1:0) 1002:964a:1849:9640 rev 0, Mem @ 0xd0000000/268435456, 0xfef00000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[   108.017] (II) LoadModule: "glx"
[   108.027] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   108.082] (II) Module glx: vendor="X.Org Foundation"
[   108.082]    compiled for 1.20.4, module version = 1.0.0
:
[   108.083]    ABI class: X.Org Server Extension, version 10.0
[   108.083] (II) Applying OutputClass "Radeon" to /dev/dri/card0
[   108.083]    loading driver: radeon
[   108.083] (==) Matched radeon as autoconfigured driver 0
[   108.083] (==) Matched ati as autoconfigured driver 1
[   108.083] (==) Matched modesetting as autoconfigured driver 2
[   108.083] (==) Matched fbdev as autoconfigured driver 3
[   108.083] (==) Matched vesa as autoconfigured driver 4
[   108.083] (==) Assigned the driver to the xf86ConfigLayout
[   108.083] (II) LoadModule: "radeon"
[   108.083] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[   108.124] (II) Module radeon: vendor="X.Org Foundation"
[   108.124]    compiled for 1.20.4, module version = 19.0.1
[   108.124]    Module class: X.Org Video Driver
[   108.124]    ABI class: X.Org Video Driver, version 24.0
[   108.124] (II) LoadModule: "ati"
[   108.125] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[   108.133] (II) Module ati: vendor="X.Org Foundation"
[   108.134]    compiled for 1.20.4, module version = 19.0.1
[   108.134]    Module class: X.Org Video Driver
[   108.134]    ABI class: X.Org Video Driver, version 24.0
[   108.134] (II) LoadModule: "modesetting"
[   108.134] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   108.154] (II) Module modesetting: vendor="X.Org Foundation"
[   108.154]    compiled for 1.20.4, module version = 1.20.4
[   108.154]    Module class: X.Org Video Driver
[   108.154]    ABI class: X.Org Video Driver, version 24.0
[   108.155] (II) LoadModule: "fbdev"
[   108.155] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
:
[   108.156] (II) Module fbdev: vendor="X.Org Foundation"
[   108.156]    compiled for 1.20.0, module version = 0.5.0
[   108.156]    Module class: X.Org Video Driver
[   108.156]    ABI class: X.Org Video Driver, version 24.0
[   108.156] (II) LoadModule: "vesa"
[   108.156] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   108.163] (II) Module vesa: vendor="X.Org Foundation"
[   108.163]    compiled for 1.20.1, module version = 2.4.0
[   108.163]    Module class: X.Org Video Driver
[   108.163]    ABI class: X.Org Video Driver, version 24.0
[   108.163] (II) RADEON: Driver for ATI/AMD Radeon chipsets:
        ATI Radeon Mobility X600 (M24), ATI FireMV 2400,
        ATI Radeon Mobility X300 (M24), ATI FireGL M24 GL,
        ATI Radeon X600 (RV380), ATI FireGL V3200 (RV380),
        ATI Radeon IGP320 (A3), ATI Radeon IGP330/340/350 (A4),
        ATI Radeon 9500, ATI Radeon 9600TX, ATI FireGL Z1, ATI Radeon 9800SE,
        ATI Radeon 9800, ATI FireGL X2, ATI Radeon 9600, ATI Radeon 9600SE,
        ATI Radeon 9600XT, ATI FireGL T2, ATI Radeon 9650, ATI FireGL RV360,
        ATI Radeon 7000 IGP (A4+), ATI Radeon 8500 AIW,
        ATI Radeon IGP320M (U1), ATI Radeon IGP330M/340M/350M (U2),
        ATI Radeon Mobility 7000 IGP, ATI Radeon 9000/PRO, ATI Radeon 9000,
        ATI Radeon X800 (R420), ATI Radeon X800PRO (R420),
        ATI Radeon X800SE (R420), ATI FireGL X3 (R420),
        ATI Radeon Mobility 9800 (M18), ATI Radeon X800 SE (R420),
        ATI Radeon X800XT (R420), ATI Radeon X800 VE (R420),
        ATI Radeon X850 (R480), ATI Radeon X850 XT (R480),
        ATI Radeon X850 SE (R480), ATI Radeon X850 PRO (R480),
        ATI Radeon X850 XT PE (R480), ATI Radeon Mobility M7,
        ATI Mobility FireGL 7800 M7, ATI Radeon Mobility M6,
:
        ATI FireGL Mobility 9000 (M9), ATI Radeon Mobility 9000 (M9),
        ATI Radeon 9700 Pro, ATI Radeon 9700/9500Pro, ATI FireGL X1,
        ATI Radeon 9800PRO, ATI Radeon 9800XT,
        ATI Radeon Mobility 9600/9700 (M10/M11),
        ATI Radeon Mobility 9600 (M10), ATI Radeon Mobility 9600 (M11),
        ATI FireGL Mobility T2 (M10), ATI FireGL Mobility T2e (M11),
        ATI Radeon, ATI FireGL 8700/8800, ATI Radeon 8500, ATI Radeon 9100,
        ATI Radeon 7500, ATI Radeon VE/7000, ATI ES1000,
        ATI Radeon Mobility X300 (M22), ATI Radeon Mobility X600 SE (M24C),
        ATI FireGL M22 GL, ATI Radeon X800 (R423), ATI Radeon X800PRO (R423),
        ATI Radeon X800LE (R423), ATI Radeon X800SE (R423),
        ATI Radeon X800 XTP (R430), ATI Radeon X800 XL (R430),
        ATI Radeon X800 SE (R430), ATI Radeon X800 (R430),
        ATI FireGL V7100 (R423), ATI FireGL V5100 (R423),
        ATI FireGL unknown (R423), ATI Mobility FireGL V5000 (M26),
        ATI Mobility Radeon X700 XL (M26), ATI Mobility Radeon X700 (M26),
        ATI Radeon X550XTX, ATI Radeon 9100 IGP (A5),
        ATI Radeon Mobility 9100 IGP (U3), ATI Radeon XPRESS 200,
        ATI Radeon XPRESS 200M, ATI Radeon 9250, ATI Radeon 9200,
        ATI Radeon 9200SE, ATI FireMV 2200, ATI Radeon X300 (RV370),
        ATI Radeon X600 (RV370), ATI Radeon X550 (RV370),
        ATI FireGL V3100 (RV370), ATI FireMV 2200 PCIE (RV370),
        ATI Radeon Mobility 9200 (M9+), ATI Mobility Radeon X800 XT (M28),
        ATI Mobility FireGL V5100 (M28), ATI Mobility Radeon X800 (M28),
        ATI Radeon X850, ATI unknown Radeon / FireGL (R480),
        ATI Radeon X800XT (R423), ATI FireGL V5000 (RV410),
        ATI Radeon X700 XT (RV410), ATI Radeon X700 PRO (RV410),
        ATI Radeon X700 SE (RV410), ATI Radeon X700 (RV410),
        ATI Radeon X1800, ATI Mobility Radeon X1800 XT,
:
        ATI Mobility Radeon X1800, ATI Mobility FireGL V7200,
        ATI FireGL V7200, ATI FireGL V5300, ATI Mobility FireGL V7100,
        ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
        ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
        ATI Mobility Radeon X1400, ATI Radeon X1550 64-bit,
        ATI Mobility Radeon X1300, ATI Radeon X1300, ATI FireGL V3300,
        ATI FireGL V3350, ATI Mobility Radeon X1450,
        ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
        ATI FireMV 2250, ATI Radeon X1650, ATI Mobility FireGL V5200,
        ATI Mobility Radeon X1600, ATI Radeon X1300 XT/X1600 Pro,
        ATI FireGL V3400, ATI Mobility FireGL V5250,
        ATI Mobility Radeon X1700, ATI Mobility Radeon X1700 XT,
        ATI FireGL V5200, ATI Radeon X2300HD, ATI Mobility Radeon HD 2300,
        ATI Radeon X1950, ATI Radeon X1900, ATI AMD Stream Processor,
        ATI RV560, ATI Mobility Radeon X1900, ATI Radeon X1950 GT, ATI RV570,
        ATI FireGL V7400, ATI Radeon 9100 PRO IGP,
        ATI Radeon Mobility 9200 IGP, ATI Radeon X1200, ATI RS740,
        ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro,
        ATI Radeon HD 2900 GT, ATI FireGL V8650, ATI FireGL V8600,
        ATI FireGL V7600, ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
        ATI Radeon HD 4850 x2, ATI FirePro V8750 (FireGL),
        ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
        ATI Mobility RADEON HD 4850 X2, ATI FirePro RV770,
        AMD FireStream 9270, AMD FireStream 9250, ATI FirePro V8700 (FireGL),
        ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
        ATI FirePro M7750, ATI M98, ATI Mobility Radeon HD 4650,
        ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
        ATI FirePro M5750, ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
        ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
:
        ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
        ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
        ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
        ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI RV610,
        ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
        ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI Radeon HD 2350,
        ATI Mobility Radeon HD 2400 XT, ATI Mobility Radeon HD 2400,
        ATI RADEON E2400, ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
        ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
        ATI Mobility Radeon HD 3850 X2, ATI Mobility Radeon HD 3870,
        ATI Mobility Radeon HD 3870 X2, ATI Radeon HD3870 X2,
        ATI FireGL V7700, ATI Radeon HD3690, AMD Firestream 9170,
        ATI Radeon HD 4550, ATI Radeon RV710, ATI Radeon HD 4350,
        ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
        ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
        ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
        ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
        ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
        ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
        ATI FireGL V3600, ATI Radeon HD 2600 LE,
        ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
        ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
        ATI Radeon HD 3450, ATI Radeon HD 3430, ATI FirePro V3700,
        ATI FireMV 2450, ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
        ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
        ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
        ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
        ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
        ATI Radeon HD 3300 Graphics, ATI Radeon 3000 Graphics, SUMO, SUMO2,
:
        ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
        ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
        AMD Radeon HD 6310 Graphics, AMD Radeon HD 6250 Graphics,
        AMD Radeon HD 6300 Series Graphics,
        AMD Radeon HD 6200 Series Graphics, PALM, CYPRESS,
        ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
        AMD Firestream 9350, ATI Radeon HD 5800 Series,
        ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
        ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
        ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
        ATI Radeon HD 5670, ATI Radeon HD 5570, ATI Radeon HD 5500 Series,
        REDWOOD, ATI Mobility Radeon Graphics, CEDAR, ATI FirePro 2270,
        ATI Radeon HD 5450, CAYMAN, AMD Radeon HD 6900 Series,
        AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series, BARTS,
        AMD Radeon HD 6800 Series, AMD Radeon HD 6700 Series, TURKS, CAICOS,
        ARUBA, TAHITI, PITCAIRN, VERDE, OLAND, HAINAN, BONAIRE, KABINI,
        MULLINS, KAVERI, HAWAII
[   108.170] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   108.170] (II) FBDEV: driver for framebuffer: fbdev
[   108.170] (II) VESA: driver for VESA chipsets: vesa
[   108.171] (II) [KMS] Kernel modesetting enabled.
[   108.171] (WW) Falling back to old probe method for modesetting
[   108.171] (WW) Falling back to old probe method for fbdev
[   108.171] (II) Loading sub module "fbdevhw"
[   108.171] (II) LoadModule: "fbdevhw"
[   108.171] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   108.183] (II) Module fbdevhw: vendor="X.Org Foundation"
[   108.183]    compiled for 1.20.4, module version = 0.0.2
[   108.183]    ABI class: X.Org Video Driver, version 24.0
:
[   108.183] (II) RADEON(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[   108.183] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[   108.183] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   108.183] (==) RADEON(0): Default visual is TrueColor
[   108.183] (==) RADEON(0): RGB weight 888
[   108.183] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[   108.183] (--) RADEON(0): Chipset: "SUMO" (ChipID = 0x964a)
[   108.183] (II) Loading sub module "fb"
[   108.183] (II) LoadModule: "fb"
[   108.184] (II) Loading /usr/lib/xorg/modules/libfb.so
[   108.189] (II) Module fb: vendor="X.Org Foundation"
[   108.190]    compiled for 1.20.4, module version = 1.0.0
[   108.190]    ABI class: X.Org ANSI C Emulation, version 0.4
[   108.190] (II) Loading sub module "dri2"
[   108.190] (II) LoadModule: "dri2"
[   108.190] (II) Module "dri2" already built-in
[   109.437] (II) Loading sub module "glamoregl"
[   109.437] (II) LoadModule: "glamoregl"
[   109.437] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   109.491] (II) Module glamoregl: vendor="X.Org Foundation"
[   109.491]    compiled for 1.20.4, module version = 1.0.1
[   109.491]    ABI class: X.Org ANSI C Emulation, version 0.4
[   109.636] (II) RADEON(0): glamor X acceleration enabled on AMD SUMO (DRM 2.50.0 / 4.19.0-13-amd64, LLVM 7.0.1)
[   109.636] (II) RADEON(0): glamor detected, initialising EGL layer.
[   109.636] (II) RADEON(0): KMS Color Tiling: enabled
[   109.636] (II) RADEON(0): KMS Color Tiling 2D: enabled
[   109.636] (==) RADEON(0): TearFree property default: auto
:
[   109.636] (II) RADEON(0): KMS Pageflipping: enabled
[   109.666] (II) RADEON(0): Output HDMI-0 has no monitor section
[   109.688] (II) RADEON(0): Output VGA-0 has no monitor section
[   109.719] (II) RADEON(0): EDID for output HDMI-0
[   109.719] (II) RADEON(0): Manufacturer: ENC  Model: 1975  Serial#: 16843009
[   109.719] (II) RADEON(0): Year: 2010  Week: 8
[   109.719] (II) RADEON(0): EDID Version: 1.3
[   109.719] (II) RADEON(0): Digital Display Input
[   109.719] (II) RADEON(0): Max Image Size [cm]: horiz.: 48  vert.: 30
[   109.719] (II) RADEON(0): Gamma: 2.20
[   109.719] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
[   109.719] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[   109.719] (II) RADEON(0): First detailed timing is preferred mode
[   109.719] (II) RADEON(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[   109.719] (II) RADEON(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[   109.719] (II) RADEON(0): Supported established timings:
[   109.719] (II) RADEON(0): 720x400@70Hz
[   109.719] (II) RADEON(0): 640x480@60Hz
[   109.719] (II) RADEON(0): 800x600@60Hz
[   109.719] (II) RADEON(0): 1024x768@60Hz
[   109.719] (II) RADEON(0): Manufacturer's mask: 0
[   109.719] (II) RADEON(0): Supported standard timings:
[   109.719] (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   109.719] (II) RADEON(0): #1: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[   109.719] (II) RADEON(0): Supported detailed timing:
[   109.719] (II) RADEON(0): clock: 119.0 MHz   Image Size:  474 x 297 mm
[   109.719] (II) RADEON(0): h_active: 1680  h_sync: 1728  h_sync_end 1760 h_blank_end 1840 h_border: 0
[   109.719] (II) RADEON(0): v_active: 1050  v_sync: 1053  v_sync_end 1059 v_blanking: 1080 v_border: 0
[   109.719] (II) RADEON(0): Serial No: 90786020
:
[   109.719] (II) RADEON(0): Ranges: V min: 59 V max: 61 Hz, H min: 31 H max: 65 kHz, PixClock max 125 MHz
[   109.719] (II) RADEON(0): Monitor name: S2202W
[   109.719] (II) RADEON(0): EDID (in hex):
[   109.719] (II) RADEON(0):    00ffffffffffff0015c3751901010101
[   109.719] (II) RADEON(0):    0814010380301e78eaee95a3544c9926
[   109.719] (II) RADEON(0):    0f5054a1080081808140010101010101
[   109.719] (II) RADEON(0):    0101010101017c2e90a0601a1e403020
[   109.719] (II) RADEON(0):    3600da291100001a000000ff00393037
[   109.719] (II) RADEON(0):    38363032300a20202020000000fd003b
[   109.719] (II) RADEON(0):    3d1f410c000a202020202020000000fc
[   109.719] (II) RADEON(0):    005332323032570a202020202020002d
[   109.719] (II) RADEON(0): Printing probed modes for output HDMI-0
[   109.719] (II) RADEON(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
[   109.719] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   109.719] (II) RADEON(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   109.719] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   109.719] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   109.719] (II) RADEON(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   109.719] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   109.741] (II) RADEON(0): EDID for output VGA-0
[   109.742] (II) RADEON(0): Output HDMI-0 connected
:
[   109.742] (II) RADEON(0): Output VGA-0 disconnected
[   109.742] (II) RADEON(0): Using exact sizes for initial modes
[   109.742] (II) RADEON(0): Output HDMI-0 using initial mode 1680x1050 +0+0
[   109.742] (II) RADEON(0): mem size init: gart size :3fdde000 vram size: s:10000000 visible:f5a4000
[   109.742] (==) RADEON(0): DPI set to (96, 96)
[   109.742] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
[   109.742] (II) Loading sub module "ramdac"
[   109.742] (II) LoadModule: "ramdac"
[   109.742] (II) Module "ramdac" already built-in
[   109.742] (II) UnloadModule: "modesetting"
[   109.742] (II) Unloading modesetting
[   109.742] (II) UnloadModule: "fbdev"
[   109.742] (II) Unloading fbdev
[   109.742] (II) UnloadSubModule: "fbdevhw"
[   109.742] (II) Unloading fbdevhw
[   109.743] (II) UnloadModule: "vesa"
[   109.743] (II) Unloading vesa
[   109.743] (II) RADEON(0): [DRI2] Setup complete
[   109.743] (II) RADEON(0): [DRI2]   DRI driver: r600
[   109.743] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[   109.743] (II) RADEON(0): Front buffer size: 7087K
[   109.743] (II) RADEON(0): VRAM usage limit set to 219974K
[   109.744] (II) RADEON(0): SYNC extension fences enabled
[   109.744] (II) RADEON(0): Present extension enabled
[   109.744] (==) RADEON(0): DRI3 enabled
[   109.744] (==) RADEON(0): Backing store enabled
[   109.744] (II) RADEON(0): Direct rendering enabled
[   109.829] (II) RADEON(0): Use GLAMOR acceleration.
[   109.829] (II) RADEON(0): Acceleration enabled
:
[   109.742] (II) RADEON(0): Output VGA-0 disconnected
[   109.742] (II) RADEON(0): Using exact sizes for initial modes
[   109.742] (II) RADEON(0): Output HDMI-0 using initial mode 1680x1050 +0+0
[   109.742] (II) RADEON(0): mem size init: gart size :3fdde000 vram size: s:10000000 visible:f5a4000
[   109.742] (==) RADEON(0): DPI set to (96, 96)
[   109.742] (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
[   109.742] (II) Loading sub module "ramdac"
[   109.742] (II) LoadModule: "ramdac"
[   109.742] (II) Module "ramdac" already built-in
[   109.742] (II) UnloadModule: "modesetting"
[   109.742] (II) Unloading modesetting
[   109.742] (II) UnloadModule: "fbdev"
[   109.742] (II) Unloading fbdev
[   109.742] (II) UnloadSubModule: "fbdevhw"
[   109.742] (II) Unloading fbdevhw
[   109.743] (II) UnloadModule: "vesa"
[   109.743] (II) Unloading vesa
[   109.743] (II) RADEON(0): [DRI2] Setup complete
[   109.743] (II) RADEON(0): [DRI2]   DRI driver: r600
[   109.743] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[   109.743] (II) RADEON(0): Front buffer size: 7087K
[   109.743] (II) RADEON(0): VRAM usage limit set to 219974K
[   109.744] (II) RADEON(0): SYNC extension fences enabled
[   109.744] (II) RADEON(0): Present extension enabled
[   109.744] (==) RADEON(0): DRI3 enabled
[   109.744] (==) RADEON(0): Backing store enabled
[   109.744] (II) RADEON(0): Direct rendering enabled
[   109.829] (II) RADEON(0): Use GLAMOR acceleration.
[   109.829] (II) RADEON(0): Acceleration enabled
:
[   109.829] (==) RADEON(0): DPMS enabled
[   109.829] (==) RADEON(0): Silken mouse enabled
[   109.829] (II) RADEON(0): Set up textured video (glamor)
[   109.829] (II) RADEON(0): [XvMC] Associated with GLAMOR Textured Video.
[   109.829] (II) RADEON(0): [XvMC] Extension initialized.
[   109.830] (II) Initializing extension Generic Event Extension
[   109.831] (II) Initializing extension SHAPE
[   109.831] (II) Initializing extension MIT-SHM
[   109.831] (II) Initializing extension XInputExtension
[   109.832] (II) Initializing extension XTEST
[   109.832] (II) Initializing extension BIG-REQUESTS
[   109.833] (II) Initializing extension SYNC
[   109.833] (II) Initializing extension XKEYBOARD
[   109.834] (II) Initializing extension XC-MISC
[   109.834] (II) Initializing extension SECURITY
[   109.834] (II) Initializing extension XFIXES
[   109.835] (II) Initializing extension RENDER
[   109.835] (II) Initializing extension RANDR
[   109.836] (II) Initializing extension COMPOSITE
[   109.836] (II) Initializing extension DAMAGE
[   109.837] (II) Initializing extension MIT-SCREEN-SAVER
[   109.837] (II) Initializing extension DOUBLE-BUFFER
[   109.838] (II) Initializing extension RECORD
[   109.838] (II) Initializing extension DPMS
[   109.838] (II) Initializing extension Present
[   109.839] (II) Initializing extension DRI3
[   109.839] (II) Initializing extension X-Resource
[   109.840] (II) Initializing extension XVideo
[   109.840] (II) Initializing extension XVideo-MotionCompensation
:
[   109.840] (II) Initializing extension SELinux
[   109.840] (II) SELinux: Disabled on system
[   109.840] (II) Initializing extension GLX
[   109.847] (II) AIGLX: Loaded and initialized r600
[   109.847] (II) GLX: Initialized DRI2 GL provider for screen 0
[   109.848] (II) Initializing extension XFree86-VidModeExtension
[   109.848] (II) Initializing extension XFree86-DGA
[   109.848] (II) Initializing extension XFree86-DRI
[   109.848] (II) Initializing extension DRI2
[   109.850] (II) RADEON(0): Setting screen physical size to 444 x 277
[   110.261] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   110.261] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   110.261] (II) LoadModule: "libinput"
[   110.261] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   110.323] (II) Module libinput: vendor="X.Org Foundation"
[   110.323]    compiled for 1.20.4, module version = 0.28.2
[   110.323]    Module class: X.Org XInput Driver
[   110.323]    ABI class: X.Org XInput driver, version 24.1
[   110.323] (II) Using input driver 'libinput' for 'Power Button'
[   110.325] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 27 paused 0
[   110.325] (**) Power Button: always reports core events
[   110.325] (**) Option "Device" "/dev/input/event2"
[   110.325] (**) Option "_source" "server/udev"
[   110.386] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   110.386] (II) event2  - Power Button: device is a keyboard
[   110.386] (II) event2  - Power Button: device removed
[   110.387] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   110.387] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   110.387] (**) Option "xkb_model" "pc105"
:
[   110.387] (**) Option "xkb_layout" "jp"
[   110.439] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   110.439] (II) event2  - Power Button: device is a keyboard
[   110.441] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   110.441] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   110.441] (II) Using input driver 'libinput' for 'Power Button'
[   110.443] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 30 paused 0
[   110.444] (**) Power Button: always reports core events
[   110.444] (**) Option "Device" "/dev/input/event1"
[   110.444] (**) Option "_source" "server/udev"
[   110.445] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   110.445] (II) event1  - Power Button: device is a keyboard
[   110.445] (II) event1  - Power Button: device removed
[   110.445] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[   110.445] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   110.445] (**) Option "xkb_model" "pc105"
[   110.445] (**) Option "xkb_layout" "jp"
[   110.447] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   110.447] (II) event1  - Power Button: device is a keyboard
[   110.448] (II) config/udev: Adding input device Fujitsu USB mouse (/dev/input/event3)
[   110.449] (**) Fujitsu USB mouse: Applying InputClass "libinput pointer catchall"
[   110.449] (II) Using input driver 'libinput' for 'Fujitsu USB mouse'
[   110.510] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 31 paused 0
[   110.510] (**) Fujitsu USB mouse: always reports core events
[   110.511] (**) Option "Device" "/dev/input/event3"
[   110.511] (**) Option "_source" "server/udev"
[   110.515] (II) event3  - Fujitsu USB mouse: is tagged by udev as: Mouse
[   110.515] (II) event3  - Fujitsu USB mouse: device is a pointer
:
[   110.515] (II) event3  - Fujitsu USB mouse: device removed
[   110.516] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb6/6-4/6-4:1.0/0003:04C5:14BB.0001/input/input3/event3"
[   110.516] (II) XINPUT: Adding extended input device "Fujitsu USB mouse" (type: MOUSE, id 8)
[   110.517] (**) Option "AccelerationScheme" "none"
[   110.517] (**) Fujitsu USB mouse: (accel) selected scheme none/0
[   110.517] (**) Fujitsu USB mouse: (accel) acceleration factor: 2.000
[   110.517] (**) Fujitsu USB mouse: (accel) acceleration threshold: 4
[   110.521] (II) event3  - Fujitsu USB mouse: is tagged by udev as: Mouse
[   110.521] (II) event3  - Fujitsu USB mouse: device is a pointer
[   110.522] (II) config/udev: Adding input device Fujitsu USB mouse (/dev/input/mouse0)
[   110.522] (II) No input driver specified, ignoring this device.
[   110.522] (II) This device may have been added with another device file.
[   110.523] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event5)
[   110.523] (II) No input driver specified, ignoring this device.
[   110.523] (II) This device may have been added with another device file.
[   110.523] (II) config/udev: Adding input device HD-Audio Generic Line (/dev/input/event6)
[   110.523] (II) No input driver specified, ignoring this device.
[   110.523] (II) This device may have been added with another device file.
[   110.523] (II) config/udev: Adding input device HD-Audio Generic Line Out Front (/dev/input/event7)
[   110.523] (II) No input driver specified, ignoring this device.
[   110.523] (II) This device may have been added with another device file.
[   110.524] (II) config/udev: Adding input device HD-Audio Generic Line Out Surround (/dev/input/event8)
[   110.524] (II) No input driver specified, ignoring this device.
[   110.524] (II) This device may have been added with another device file.
[   110.524] (II) config/udev: Adding input device HD-Audio Generic Line Out CLFE (/dev/input/event9)
[   110.524] (II) No input driver specified, ignoring this device.
[   110.524] (II) This device may have been added with another device file.
:
[   110.525] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   110.525] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   110.525] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   110.527] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 32 paused 0
[   110.527] (**) AT Translated Set 2 keyboard: always reports core events
[   110.527] (**) Option "Device" "/dev/input/event0"
[   110.527] (**) Option "_source" "server/udev"
[   110.528] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   110.528] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[   110.528] (II) event0  - AT Translated Set 2 keyboard: device removed
[   110.528] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   110.528] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[   110.528] (**) Option "xkb_model" "pc105"
[   110.529] (**) Option "xkb_layout" "jp"
[   110.530] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   110.530] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[   110.531] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[   110.531] (II) No input driver specified, ignoring this device.
[   110.531] (II) This device may have been added with another device file.
[   110.618] (**) Option "fd" "27"
[   110.618] (II) event2  - Power Button: device removed
[   110.619] (**) Option "fd" "30"
[   110.619] (II) event1  - Power Button: device removed
[   110.619] (**) Option "fd" "31"
[   110.619] (II) event3  - Fujitsu USB mouse: device removed
[   110.619] (**) Option "fd" "32"
[   110.619] (II) event0  - AT Translated Set 2 keyboard: device removed
[   110.622] (II) UnloadModule: "libinput"
:
[   110.528] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[   110.528] (II) event0  - AT Translated Set 2 keyboard: device removed
[   110.528] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   110.528] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[   110.528] (**) Option "xkb_model" "pc105"
[   110.529] (**) Option "xkb_layout" "jp"
[   110.530] (II) event0  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   110.530] (II) event0  - AT Translated Set 2 keyboard: device is a keyboard
[   110.531] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[   110.531] (II) No input driver specified, ignoring this device.
[   110.531] (II) This device may have been added with another device file.
[   110.618] (**) Option "fd" "27"
[   110.618] (II) event2  - Power Button: device removed
[   110.619] (**) Option "fd" "30"
[   110.619] (II) event1  - Power Button: device removed
[   110.619] (**) Option "fd" "31"
[   110.619] (II) event3  - Fujitsu USB mouse: device removed
[   110.619] (**) Option "fd" "32"
[   110.619] (II) event0  - AT Translated Set 2 keyboard: device removed
[   110.622] (II) UnloadModule: "libinput"
[   110.622] (II) systemd-logind: releasing fd for 13:64
[   110.638] (II) UnloadModule: "libinput"
[   110.638] (II) systemd-logind: releasing fd for 13:67
[   110.670] (II) UnloadModule: "libinput"
[   110.670] (II) systemd-logind: releasing fd for 13:65
[   110.686] (II) UnloadModule: "libinput"
[   110.686] (II) systemd-logind: releasing fd for 13:66
[   110.727] (II) Server terminated successfully (0). Closing log file.
(END)

オフライン

 

#2 2021-01-22 10:49:57

nahoko
メンバ
登録日: 2020-11-05

Re: root でXを開始する方法は?

EE は見当たらず、
[ 326.033] (WW) Falling back to old probe method for modesetting
[ 326.033] (WW) Falling back to old probe method for fbdev

ググると
https://blog.kujira-station.com/20120119834
X Window が起動しなくなった!

>(WW) Falling back to old probe method for vesa

が近い

やはりXorg.conf をどうにかしないといけない雰囲気だ。Googleで調べると、なんだかバージョンアップ前のconfigが残っているために起こるエラーらしいです。
しょうがないので、もう少し調べてみるとXorgコマンドに、デバイスの情報を読み取って勝手にコンフィグファイルを作ってくれる機能があるという記事を見つけたのでそれを試してみることにしました。その時打ったコマンドが下です。

 Xorg –configure

すると、あっという間にPCのマシン環境を走査してコンフィグを作ってくれました!これは凄い!!後はこの新しいconfigを元からあるXorg.conf と置き換えてあげればいいだけ!

 置き換えた後、X Windowを起動させたら、見事にうまく起動することができました。

なんだかよくわからないけど、
 Xorg –configure これを深堀してみる

オフライン

 

#3 2021-01-22 11:18:31

nahoko
メンバ
登録日: 2020-11-05

Re: root でXを開始する方法は?

https://wiki.archlinux.jp/index.php/Xorg

~# Xorg :0 -configure
(EE)
Fatal server error:
(EE) Server is already active for display 0
    If this server is no longer running, remove /tmp/.X0-lock
    and start again.
(EE)
(EE)
Please consult the The X.Org Foundation support
     at http://wiki.x.org
for help.
(EE)

>ヒント: 既に X サーバーを動作させている場合は、別のディスプレイを使って下さい、例: Xorg :2 -configure。

~# Xorg :2 -configure

X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.19.0-12-amd64 x86_64 Debian
Current Operating System: Linux kyo 4.19.0-13-amd64 #1 SMP Debian 4.19.160-2 (2020-11-28) x86_64
Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-4.19.0-13-amd64 root=UUID=cf82c300-5af6-45d6-a682-1e93b9105cae ro rootflags=subvol=@ quiet net.ifnames=0
Build Date: 01 December 2020  05:59:57PM
xorg-server 2:1.20.4-1+deb10u2 (https://www.debian.org/support)
Current version of pixman: 0.36.0
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.2.log", Time: Fri Jan 22 11:16:09 2021
List of video drivers:
    amdgpu
    ati
    intel
    nouveau
    qxl
    radeon
    vmware
    xrdpdev
    modesetting
    fbdev
    vesa
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(II) AMDGPU(0): [KMS] Kernel modesetting enabled.


Xorg detected your mouse at device /dev/input/mice.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.

Your xorg.conf file is /root/xorg.conf.new

To test the server, run 'X -config /root/xorg.conf.new'

(EE) Server terminated with error (2). Closing log file.
-------------------------
最終行に(EE) Server terminated with error (2). Closing log file. とあるけど、いいのか?

オフライン

 

Board footer

Powered by FluxBB