お知らせ

  • 利用規約を守って投稿してください。また、よくある質問および投稿の手引きも参照してください。
  • メッセージの投稿にはアカウントが必要です。未登録の方は、ユーザ登録ページからアカウントを作成することができます。

ページ: 1

 

#1 2024-09-27 10:18:44

gr
メンバ
登録日: 2019-06-14

印刷できない

OS ubuntu 22.04.5 LTS
プリンタ Canon MG5130 USB接続
ドライバ　Canon MG5100 series - CUPS+Gutenprint v5.3.3
印刷しようとしても「印刷が停止されました」となって印刷できません。
どうすればよいでしょうか？

オフライン

 

#2 2024-09-28 10:49:28

bybywin
メンバ
From: 日本国群馬県
登録日: 2011-04-22

Re: 印刷できない

Canon MG5130なら、代替えのドライバーで動きます。
プリンターのアイコンから手順で進んで、キャノンを選んで下さい。
WEBの画面など簡単な印刷なら出来ます。

オフライン

 

#3 2024-10-01 04:03:28

gr
メンバ
登録日: 2019-06-14

Re: 印刷できない

ご教示ありがとうございます。
プリンタを全部消してUSB接続のままプリンタの追加をしたところ
MG5100のアイコンが出てきてクリックしてプリンタのドライバをMG５３００に
しましたが、状況は変わりませんでした。

オフライン

 

#4 2024-10-02 00:06:04

iinews
メンバ
登録日: 2014-06-02

Re: 印刷できない

私はlubuntu24.04でエプソンプリンタなので試すことはできませんが・・・

https://itsubuntu.com/how-to-install-canon-printer-driver-in-ubuntu-22-04-lts/
こちらは参考になりませんか？
sudo add-apt-repository ppa:thierry-f/fork-michael-gruz
これを実行すると（追加まではしてません）以下が出てきます。
cangearmp2、cnijfilter2はもちろんcnrdrvcups-lipslx、cnrdrvcups-ufr2-uk、cnrdrvcups-ufr2-usはこのppa追加でインストール可能と思われます。

foomatic-dbは最初からありました。

Official drivers of Canon printers and multifunction devices, included versions 2.20 and newer (2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 3.0, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 3.8)
ver2.2〜3.8まで対応という意味に読めますがMG5100とはないですね。
cangearmp2 driver add the 10/2019
=============================
   TS5350i, G600, TS3500, TR4600, E4500, TR4700, XK500, TS8530, XK100, TS7530, TS7450i, GX6000, GX7000, TS5400, TS3400, E3400, TR7000, G2020, G3060, G2060, G3020, TS7430, XK90, TS8430, TR7600, TR8600, TR8630, TS6400, TS7400, G7000, G7080, GM4000, GM4080, G6000, G6080, TS5300, TS5380, TS6300, TS6380, TS7330, TS8300, TS8380, TS8330, XK60, TS6330, TS3300, E3300, TS8200, XK80, TS8230, TS8280, TS6200, TS6230, TS6280, TS9500, TR9530, TS9580, TR4500, E4200, LiDE 400, LiDE 300, G3010, G4010, TS9100, TS8100, TS6100, TR8500, TR7500, TS5100, TS3100, E3100, TS9180, TS8180, TS6180, TR8580, TS8130, TS6130, TR8530, TR7530, XK50, XK70, TS9000, TS8000, TS6000, TS5000, MG3000, E470, G4000, MB2100, MB2700, MB5100, MB5400, G3000, MG7700, MG6900, MG6800, MG5700, MG3600, MX450, MX490, E480, MG7500, MG6600, MG5600, MG2900, MB2000, MB2300, MB5000, MB5300, E460

Cnijfilter2 driver add the 10/2019
===========================
   E200, E300, E3100, E3300, E3400, E4200, E4500, E460, E470, E480, G1020, G2020, G2060, G3000, G3010, G3020, G3060, G4000, G4010, G5000, G500, G5080, G6000, G600, G6080, G7000, G7080, GM2000, GM2080, GM4000, GM4080, GX6000, GX7000, IB4000, IB4100, IP110, MB2000, MB2100, MB2300, MB2700, MB5000, MB5100, MB5300, MB5400, MG2900, MG3000, MG3600, MG5600, MG5700, MG6600, MG6800, MG6900, MG7500, MG7700, MX490, TR150, TR4500, TR4600, TR4700, TR7000, TR703, TR7500, TR7530, TR7600, TR8500, TR8530, TR8580, TR8600, TR8630, TR9530, TS200, TS300, TS3100, TS3300, TS3400, TS3500, TS5000, TS5100, TS5300, TS5350I, TS5380, TS5400, TS6000, TS6100, TS6130, TS6180, TS6200, TS6230, TS6280, TS6300, TS6330, TS6380, TS6400, TS700, TS708, TS7330, TS7400, TS7430, TS7450I, TS7530, TS8000, TS8100, TS8130, TS8180, TS8200, TS8230, TS8280, TS8300, TS8330, TS8380, TS8430, TS8530, TS9000, TS9100, TS9180, TS9500, TS9580, XK100, XK500, XK50, XK60, XK70, XK80, XK90

念の為canonサイトを確認したところドライバ自体はありましたがver3.4、ubuntu10.04用とありました。
https://canon.jp/support/software/os/select?pr=3038&os=20
あまりにも古いのでとてもお勧めできませんが・・・
調べる限りMGでは7730のver5.2、ubuntu15.04用までしかないようです。

オフライン

 

#5 2024-10-02 00:24:00

iinews
メンバ
登録日: 2014-06-02

Re: 印刷できない

こちらも載せておきます。
https://www.ubuntupit.com/how-to-install-canon-printer-driver-in-ubuntu-linux/
最初のリンクと同じようですが少し違いがありますね。

ユーザー アカウントに Foomatic データベースの使用を許可する必要があります。新しいユーザーを追加するか、既存のユーザーに Linux lpadminツールの使用を許可することができます。

sudo adduser ユーザーアカウント名 lpadmin

オフライン

 

#6 2024-10-02 10:28:26

gr
メンバ
登録日: 2019-06-14

Re: 印刷できない

いろいろとご教示いただきありがとうございました。
早速やってみます。

オフライン

 

#7 2024-10-27 16:12:44

gr
メンバ
登録日: 2019-06-14

Re: 印刷できない

久々にやってみようと思ってトライしましたができませんでした。
$ less /var/log/cups/error_log
D [27/Oct/2024:15:56:20 +0900] Get-Jobs ipp://localhost/printers/MG5100-series
D [27/Oct/2024:15:56:20 +0900] [Client 21] Returning IPP successful-ok for Get-Jobs (ipp://localhost/printers/MG5100-series) from localhost.
D [27/Oct/2024:15:56:20 +0900] [Client 21] Content-Length: 75
D [27/Oct/2024:15:56:20 +0900] [Client 21] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/Oct/2024:15:56:20 +0900] [Client 21] con->http=0x62cf8df78590
D [27/Oct/2024:15:56:20 +0900] [Client 21] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x62cf8df87c60(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/Oct/2024:15:56:20 +0900] [Client 21] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/Oct/2024:15:56:20 +0900] [Client 21] bytes=0, http_state=0, data_remaining=75
D [27/Oct/2024:15:56:20 +0900] [Client 21] Flushing write buffer.
D [27/Oct/2024:15:56:20 +0900] [Client 21] New state is HTTP_STATE_WAITING
D [27/Oct/2024:15:56:20 +0900] [Client 21] Waiting for request.
D [27/Oct/2024:15:56:20 +0900] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/Oct/2024:15:56:20 +0900] [Client 21] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/Oct/2024:15:56:20 +0900] [Client 21] Closing connection.
D [27/Oct/2024:15:56:20 +0900] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [27/Oct/2024:15:56:21 +0900] Expiring subscriptions...
D [27/Oct/2024:15:56:25 +0900] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/Oct/2024:15:56:25 +0900] [Client 28] Server address is "/run/cups/cups.sock".
D [27/Oct/2024:15:56:25 +0900] [Client 28] Accepted from localhost (Domain)
D [27/Oct/2024:15:56:25 +0900] [Client 28] Waiting for request.
I [27/Oct/2024:15:56:25 +0900] Expiring subscriptions...
D [27/Oct/2024:15:56:25 +0900] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/Oct/2024:15:56:25 +0900] [Client 29] Server address is "/run/cups/cups.sock".
D [27/Oct/2024:15:56:25 +0900] [Client 29] Accepted from localhost (Domain)
D [27/Oct/2024:15:56:25 +0900] [Client 29] Waiting for request.
D [27/Oct/2024:15:56:25 +0900] [Client 28] POST /printers/MG5100-series HTTP/1.1
D [27/Oct/2024:15:56:25 +0900] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/Oct/2024:15:56:25 +0900] [Client 28] Read: status=200, state=6
D [27/Oct/2024:15:56:25 +0900] [Client 28] No authentication data provided.
D [27/Oct/2024:15:56:25 +0900] [Client 28] 2.0 Get-Printer-Attributes 63
D [27/Oct/2024:15:56:25 +0900] Get-Printer-Attributes ipp://localhost/printers/MG5100-series
D [27/Oct/2024:15:56:25 +0900] [Client 28] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/MG5100-series) from localhost.
D [27/Oct/2024:15:56:25 +0900] [Client 28] Content-Length: 140
D [27/Oct/2024:15:56:25 +0900] [Client 28] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/Oct/2024:15:56:25 +0900] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/Oct/2024:15:56:25 +0900] [Client 30] Server address is "/run/cups/cups.sock".
D [27/Oct/2024:15:56:25 +0900] [Client 30] Accepted from localhost (Domain)
D [27/Oct/2024:15:56:25 +0900] [Client 30] Waiting for request.
D [27/Oct/2024:15:56:25 +0900] [Client 28] con->http=0x62cf8df78590
D [27/Oct/2024:15:56:25 +0900] [Client 28] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=140, response=0x62cf8dfcc0c0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/Oct/2024:15:56:25 +0900] [Client 28] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/Oct/2024:15:56:25 +0900] [Client 28] bytes=0, http_state=0, data_remaining=140
D [27/Oct/2024:15:56:25 +0900] [Client 28] Flushing write buffer.
D [27/Oct/2024:15:56:25 +0900] [Client 28] New state is HTTP_STATE_WAITING
D [27/Oct/2024:15:56:25 +0900] [Client 28] Waiting for request.
D [27/Oct/2024:15:56:25 +0900] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/Oct/2024:15:56:25 +0900] [Client 29] POST / HTTP/1.1
D [27/Oct/2024:15:56:25 +0900] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/Oct/2024:15:56:25 +0900] [Client 29] Read: status=200, state=6
D [27/Oct/2024:15:56:25 +0900] [Client 29] No authentication data provided.
D [27/Oct/2024:15:56:25 +0900] [Client 29] 2.0 Get-Printer-Attributes 62
D [27/Oct/2024:15:56:25 +0900] Get-Printer-Attributes ipp://localhost:631/printers/MG5100-series
D [27/Oct/2024:15:56:25 +0900] [Client 29] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost:631/printers/MG5100-series) from localhost.
D [27/Oct/2024:15:56:25 +0900] [Client 29] Content-Length: 1249
D [27/Oct/2024:15:56:25 +0900] [Client 29] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/Oct/2024:15:56:25 +0900] [Client 29] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 29] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=1249, response=0x62cf8df8db50(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/Oct/2024:15:56:25 +0900] [Client 29] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/Oct/2024:15:56:25 +0900] [Client 29] bytes=0, http_state=0, data_remaining=1249
D [27/Oct/2024:15:56:25 +0900] [Client 29] Flushing write buffer.
D [27/Oct/2024:15:56:25 +0900] [Client 29] New state is HTTP_STATE_WAITING
D [27/Oct/2024:15:56:25 +0900] [Client 29] Waiting for request.
D [27/Oct/2024:15:56:25 +0900] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/Oct/2024:15:56:25 +0900] [Client 30] POST / HTTP/1.1
D [27/Oct/2024:15:56:25 +0900] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/Oct/2024:15:56:25 +0900] [Client 30] Read: status=200, state=6
D [27/Oct/2024:15:56:25 +0900] [Client 30] No authentication data provided.
D [27/Oct/2024:15:56:25 +0900] [Client 30] 2.0 Get-Printer-Attributes 64
D [27/Oct/2024:15:56:25 +0900] Get-Printer-Attributes ipp://localhost/printers/MG5100-series
D [27/Oct/2024:15:56:25 +0900] [Client 30] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/MG5100-series) from localhost.
D [27/Oct/2024:15:56:25 +0900] [Client 30] Content-Length: 381
D [27/Oct/2024:15:56:25 +0900] [Client 30] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/Oct/2024:15:56:25 +0900] [Client 29] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/Oct/2024:15:56:25 +0900] [Client 29] Closing connection.
D [27/Oct/2024:15:56:25 +0900] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/Oct/2024:15:56:25 +0900] [Client 30] con->http=0x62cf8dfd8ea0
D [27/Oct/2024:15:56:25 +0900] [Client 30] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=381, response=0x62cf8dfcc0c0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/Oct/2024:15:56:25 +0900] [Client 30] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/Oct/2024:15:56:25 +0900] [Client 30] bytes=0, http_state=0, data_remaining=381
D [27/Oct/2024:15:56:25 +0900] [Client 30] Flushing write buffer.
D [27/Oct/2024:15:56:25 +0900] [Client 30] New state is HTTP_STATE_WAITING
D [27/Oct/2024:15:56:25 +0900] [Client 30] Waiting for request.
D [27/Oct/2024:15:56:25 +0900] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/Oct/2024:15:56:25 +0900] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/Oct/2024:15:56:25 +0900] [Client 31] Server address is "/run/cups/cups.sock".
D [27/Oct/2024:15:56:25 +0900] [Client 31] Accepted from localhost (Domain)
D [27/Oct/2024:15:56:25 +0900] [Client 31] Waiting for request.
D [27/Oct/2024:15:56:25 +0900] [Client 31] GET /printers/MG5100-series.ppd HTTP/1.1
D [27/Oct/2024:15:56:25 +0900] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/Oct/2024:15:56:25 +0900] [Client 31] Read: status=200, state=3
D [27/Oct/2024:15:56:25 +0900] [Client 31] No authentication data provided.
D [27/Oct/2024:15:56:25 +0900] [Client 31] Processing GET /printers/MG5100-series.ppd
D [27/Oct/2024:15:56:25 +0900] [Client 31] filename="/etc/cups/ppd/MG5100-series.ppd", type=application/vnd.cups-ppd
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdSendHeader: code=200, type="application/vnd.cups-ppd", auth_type=0
D [27/Oct/2024:15:56:25 +0900] [Client 31] Sending file.
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 30] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/Oct/2024:15:56:25 +0900] [Client 30] Closing connection.
D [27/Oct/2024:15:56:25 +0900] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] con->http=0x62cf8dfd4580
D [27/Oct/2024:15:56:25 +0900] [Client 31] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=116536, response=(nil)(), pipe_pid=0, file=22
D [27/Oct/2024:15:56:25 +0900] [Client 31] Flushing write buffer.
D [27/Oct/2024:15:56:25 +0900] [Client 31] New state is HTTP_STATE_WAITING
D [27/Oct/2024:15:56:25 +0900] [Client 31] Waiting for request.
D [27/Oct/2024:15:56:25 +0900] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/Oct/2024:15:56:25 +0900] [Client 31] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/Oct/2024:15:56:25 +0900] [Client 31] Closing connection.
D [27/Oct/2024:15:56:25 +0900] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [27/Oct/2024:15:56:25 +0900] [Client 28] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/Oct/2024:15:56:25 +0900] [Client 28] Closing connection.
D [27/Oct/2024:15:56:25 +0900] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [27/Oct/2024:15:56:26 +0900] Expiring subscriptions...
D [27/Oct/2024:15:56:28 +0900] [Client 27] POST / HTTP/1.1
D [27/Oct/2024:15:56:28 +0900] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [27/Oct/2024:15:56:28 +0900] [Client 27] Read: status=200, state=6
D [27/Oct/2024:15:56:28 +0900] [Client 27] No authentication data provided.
D [27/Oct/2024:15:56:28 +0900] [Client 27] 2.0 Get-Printer-Attributes 65
D [27/Oct/2024:15:56:28 +0900] Get-Printer-Attributes ipp://localhost/printers/MG5100-series
D [27/Oct/2024:15:56:28 +0900] [Client 27] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/MG5100-series) from localhost.
D [27/Oct/2024:15:56:28 +0900] [Client 27] Content-Length: 101
D [27/Oct/2024:15:56:28 +0900] [Client 27] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
I [27/Oct/2024:15:56:28 +0900] Expiring subscriptions...
D [27/Oct/2024:15:56:28 +0900] Report: clients=3
D [27/Oct/2024:15:56:28 +0900] Report: jobs=8
D [27/Oct/2024:15:56:28 +0900] Report: jobs-active=0
D [27/Oct/2024:15:56:28 +0900] Report: printers=1
D [27/Oct/2024:15:56:28 +0900] Report: stringpool-string-count=1485
D [27/Oct/2024:15:56:28 +0900] Report: stringpool-alloc-bytes=11032
D [27/Oct/2024:15:56:28 +0900] Report: stringpool-total-bytes=28200
D [27/Oct/2024:15:56:28 +0900] [Client 27] con->http=0x62cf8dfcfc60
D [27/Oct/2024:15:56:28 +0900] [Client 27] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=101, response=0x62cf8df86f70(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/Oct/2024:15:56:28 +0900] [Client 27] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/Oct/2024:15:56:28 +0900] [Client 27] bytes=0, http_state=0, data_remaining=101
D [27/Oct/2024:15:56:28 +0900] [Client 27] Flushing write buffer.
D [27/Oct/2024:15:56:28 +0900] [Client 27] New state is HTTP_STATE_WAITING
D [27/Oct/2024:15:56:28 +0900] [Client 27] Waiting for request.
D [27/Oct/2024:15:56:28 +0900] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [27/Oct/2024:15:56:29 +0900] Expiring subscriptions...
D [27/Oct/2024:15:56:43 +0900] [Client 27] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/Oct/2024:15:56:43 +0900] [Client 27] Closing connection.
D [27/Oct/2024:15:56:43 +0900] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [27/Oct/2024:15:56:43 +0900] Expiring subscriptions...
I [27/Oct/2024:15:56:44 +0900] Expiring subscriptions...
D [27/Oct/2024:15:56:50 +0900] [Client 25] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/Oct/2024:15:56:50 +0900] [Client 25] Closing connection.
D [27/Oct/2024:15:56:50 +0900] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [27/Oct/2024:15:56:50 +0900] Saving printers.conf...
I [27/Oct/2024:15:56:50 +0900] Saving subscriptions.conf...
D [27/Oct/2024:15:56:50 +0900] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [27/Oct/2024:15:56:50 +0900] Expiring subscriptions...
I [27/Oct/2024:15:56:51 +0900] Expiring subscriptions...
D [27/Oct/2024:15:56:56 +0900] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [27/Oct/2024:15:56:56 +0900] [Client 32] Server address is "/run/cups/cups.sock".
D [27/Oct/2024:15:56:56 +0900] [Client 32] Accepted from localhost (Domain)
D [27/Oct/2024:15:56:56 +0900] [Client 32] Waiting for request.
I [27/Oct/2024:15:56:56 +0900] Expiring subscriptions...
D [27/Oct/2024:15:56:56 +0900] [Client 32] POST / HTTP/1.1
D [27/Oct/2024:15:56:56 +0900] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [27/Oct/2024:15:56:56 +0900] [Client 32] Read: status=200, state=6
D [27/Oct/2024:15:56:56 +0900] [Client 32] No authentication data provided.
D [27/Oct/2024:15:56:56 +0900] [Client 32] 2.0 Cancel-Subscription 66
D [27/Oct/2024:15:56:56 +0900] Cancel-Subscription /
D [27/Oct/2024:15:56:56 +0900] cupsdIsAuthorized: requesting-user-name="groebner"
D [27/Oct/2024:15:56:56 +0900] cupsdMarkDirty(----S)
D [27/Oct/2024:15:56:56 +0900] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [27/Oct/2024:15:56:56 +0900] [Client 32] Returning IPP successful-ok for Cancel-Subscription (/) from localhost.
D [27/Oct/2024:15:56:56 +0900] [Client 32] Content-Length: 75
D [27/Oct/2024:15:56:56 +0900] [Client 32] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [27/Oct/2024:15:56:56 +0900] [Client 32] con->http=0x62cf8dfc77a0
D [27/Oct/2024:15:56:56 +0900] [Client 32] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x62cf8df86f40(IPP_STATE_DATA), pipe_pid=0, file=-1
D [27/Oct/2024:15:56:56 +0900] [Client 32] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [27/Oct/2024:15:56:56 +0900] [Client 32] bytes=0, http_state=0, data_remaining=75
D [27/Oct/2024:15:56:56 +0900] [Client 32] Flushing write buffer.
D [27/Oct/2024:15:56:56 +0900] [Client 32] New state is HTTP_STATE_WAITING
D [27/Oct/2024:15:56:56 +0900] [Client 32] Waiting for request.
D [27/Oct/2024:15:56:56 +0900] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [27/Oct/2024:15:56:56 +0900] [Notifier] state=-1
D [27/Oct/2024:15:56:56 +0900] [Notifier] ippReadFile() returned IPP_ERROR!
D [27/Oct/2024:15:56:56 +0900] PID 7719 (/usr/lib/cups/notifier/dbus) exited with no errors.
D [27/Oct/2024:15:56:56 +0900] [Client 32] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [27/Oct/2024:15:56:56 +0900] [Client 32] Closing connection.
D [27/Oct/2024:15:56:56 +0900] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [27/Oct/2024:15:56:57 +0900] Expiring subscriptions...
I [27/Oct/2024:15:57:27 +0900] Saving subscriptions.conf...
D [27/Oct/2024:15:57:27 +0900] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [27/Oct/2024:15:57:27 +0900] Expiring subscriptions...

オフライン

 

#8 2024-11-01 20:12:49

iinews
メンバ
登録日: 2014-06-02

Re: 印刷できない

また調べてみましたが、これが一番近いように感じます。
ubuntu20.04でmg6130を使用できたというものです。

https://qiita.com/openyanagi/items/c522fd24afd114811f51

読む限りでは古いドライバをうまく使えてるようですが・・・

オフライン

 

#9 2024-11-20 05:24:46

gr
メンバ
登録日: 2019-06-14

Re: 印刷できない

ここまで来ました。
~/Downloads/cnijfilter-mg5100series-3.40-1-deb$ ./install.sh
実行コマンド = sudo /usr/sbin/lpadmin -p MG5100 -m canonmg5100.ppd -v cnijusb:/dev/usb/lp1 -E
lpadmin: Printer drivers are deprecated and will stop working in a future version of CUPS.
lpadmin: Unable to run cups-driverd: No such file or directory
プリンターの登録が完了していません。
lpadminコマンドを使用して、手動でプリンターの登録を行ってください。

オフライン

 

#10 2024-11-20 22:19:20

Beats
メンバ
登録日: 2015-03-14

Re: 印刷できない

こんにちは。
横から失礼します。

以前こちらのフォーラムで『Canon iP7230 インクジェットプリンターのドライバーインストール方法？』というスレッドがありました。
https://forums.ubuntulinux.jp/viewtopic.php?id=22003

その時わたしが試した方法だとcnijfilter-commonだけのインストールで印刷できたのですが、うまくいかないかもしれませんが、一度試していただけないでしょうか。

こちらにまとめてありますので、よろしければ。
https://qiita.com/Inqb8tr_jp/private/f55e7ef7a3afaaec59d2

オフライン

 

#11 2024-11-21 16:16:46

gr
メンバ
登録日: 2019-06-14

Re: 印刷できない

Beats様
ご教示ありがとうございます。
やってみましたが症状はかわらないのでもう少しいろいろとやってみようと思います。

オフライン

 

#12 2025-01-17 03:40:20

gr
メンバ
登録日: 2019-06-14

Re: 印刷できない

lpadmin: Unable to run cups-driverd: No such file or directory
が悪さをしているようです。
どなたかおわかりでしょうか？

オフライン

 

#13 2025-01-17 03:53:19

gr
メンバ
登録日: 2019-06-14

Re: 印刷できない

$ sudo apt install cups-core-drivers
パッケージリストを読み込んでいます... 完了
依存関係ツリーを作成しています... 完了       
状態情報を読み取っています... 完了       
パッケージ cups-core-drivers は使用できませんが、別のパッケージから参照されます。
これは、パッケージが欠落しているか、廃止されたか、または別のソース
からのみ利用可能であることを意味します。

E: パッケージ 'cups-core-drivers' にはインストール候補がありません

オフライン

 

 

ページ: 1

Board footer

Powered by FluxBB