
Ubuntu日本語フォーラム

ログインしていません。
VAIO VGN-TX92S に Ubuntu 6.10 Edgy Eftを入れて使っています。
ACER AL1916W
サイズ 19型ワイド
解像度 1440X900
上記の外部ディスプレイにD-sub端子でノートPCと接続してデスクトップを表示したいのですが、xorg.confをいじってもなかなかうまくいきません。
デュアルヘッドでなくても、メインディスプレイと同じが面画が表示されるか、もしくは、外部ディスプレイだけが表示されるようになればうれしいので、知恵をお貸しください。お願いいいたします。
以下が僕のデフォルトのxorg.confです。
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Intel Corporation Mobile Integrated Graphics Controller"
Driver "i810"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile Integrated Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1366x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1366x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1366x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1366x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1366x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1366x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
最後の編集者: akihikoikeda (2006-12-21 03:00:28)
オフライン
以下の段落
Section "Device"
Identifier "Intel Corporation Mobile Integrated Graphics Controller"
Driver "i810"
BusID "PCI:0:2:0"
EndSection
を下記のように書き換えてみてはどうでしょうか?
Section "Device"
Identifier "Intel Corporation Mobile Integrated Graphics Controller"
Driver "i810"
BusID "PCI:0:2:0"
Option "MonitorLayout" "CRT,LFP"
Option "Clone" "true"
Option "DevicePresence" "true"
EndSection
ThinkPad X60上ではメイン画面のクローンが外部ディスプレイに表示されます。
オフライン
わたしのNote(Lesance)ではi810switchをインストールしてREBOOTをしたら
クーロンモードで動きました。xorg.confは何もいじっていません。
man i810switch
SYNOPSIS
i810switch [ crt [ on | off ] ] [ lcd [ on | off ] ]
モニターの切替しかないですね。
わたしはできたらば拡張モード(Noteと外部モニターが一つの画面になる)を
使いたいのですが、何か方法ありませんか
オフライン
nVidia のチップだったりすると、ベンダのドライバを入れて TwinView を選択するだけなのですが、i810 だと xinerama を使うしかないんでしょうか?
少し古い記事ですが、ひげぽん氏のブログに Ubuntu で i810 ドライバを使って xinerama を有効にしている記事がありました。
http://d.hatena.ne.jp/higepon/20060822/1156229563
オフライン
#4の私の報告は勘違いです。i810switchとは関係なく
NoteのDSub端子につなげばOK。
SISのドライバーです。ネットで検索してみましたがSISのドライバーで拡張モード(
Note,外部モニターが一画面)にする方法はみつかりませんでした。
どなたかご存知の方いらっしゃいませんか
Section "Device"
Identifier "Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter"
Driver "sis"
BusID "PCI:1:0:0"
EndSection
オフライン