Ubuntu日本語フォーラム
ログインしていません。
お知らせ
#1 2010-01-11 22:23:28
- kyotaro
- メンバ
- 登録日: 2009-11-20
ウィンドウがでかすぎる！
こんばんは。 僕はUbuntuを使ってまだ間もないのですが、ウィンドウがでかすぎて、情報がディスプレイの中で見えないものがあります。 インターネットなどは、スクロールがあるので、いいのですが、オプションなどの大事な部分をいじるときなど、とにかくスクロールがないものは全ての文字が見えないのです。 設定のしかたが分かる人、ぜひ教えて下さい。
オフライン
#2 2010-01-11 22:53:17
- petitbootang
- メンバ
- From: 東京都
- 登録日: 2009-02-12
Re: ウィンドウがでかすぎる！
xserver の設定が上手くいっていないのだと思います。
取り敢えずは、kyotaro さんのマシン環境を詳しく書いてください。
オフライン
#4 2010-01-11 23:30:11
- petitbootang
- メンバ
- From: 東京都
- 登録日: 2009-02-12
Re: ウィンドウがでかすぎる！
済みません、あと、Ubuntu のバージョンは何をお使いでしょうか？
オフライン
#5 2010-01-11 23:42:43
- hito
- 管理者
- 登録日: 2007-03-18
Re: ウィンドウがでかすぎる！
画面の解像度が狭い、という問題は別途存在するので解決できるならした方がいいかもしれませんが、とりあえずは以下の方法で「見えない部分」に触ることはできます。
・Alt + マウスクリックでウインドウを「つかむ」ことができるので、「つかんで」動かすと、隠れて見えない下の方みも見えます。
・Alt + Space でウインドウのメニューが開きます。この中で「移動」を選び、カーソルキーやマウスで動かすこともできます。
オフライン
#7 2010-01-14 01:03:01
- hir0
- メンバ
- 登録日: 2008-09-28
Re: ウィンドウがでかすぎる！
現在、どのドライバが適用されているのかをお願いします
$ grep autoconfigured /var/log/Xorg.0.log
状況によってはこちらが解決に繋がるかも
http://ubuntuforums.org/showthread.php?t=1245831
オフライン
#9 2010-01-15 21:52:42
- hir0
- メンバ
- 登録日: 2008-09-28
Re: ウィンドウがでかすぎる！
いえ、グラフィックドライバです、現在はグラフィックドライバが上手く動作していないと考えられます。
kyotaroさんのPCに採用されているのはVIA KL-133Aと言うものです（多分）
問題はUbuntuに専用のドライバが入っているのかどうか、メーカーからLinux用のドライバの提供が有るかどうか。（この辺もkyotaroさんの情報提出が多ければ素早い情報が得られやすいのでご協力を）
もし無ければ凡庸のドライバが自動的に充てがわれますので、まずは確認を。
アプリケーション→アクセサリ→端末を開いて＄マークの後に
grep autoconfigured /var/log/Xorg.0.log
と入力（コピペ）して下さい。
その結果で判断できます。
この他にも原因を突き止めるために幾つか情報が必要ですが、同じく端末から
gedit /var/log/Xorg.0.log
と実行して現れたテキストエディタの内容を全て提示して頂ければやり取りの手間が多少は省けます。
オフライン
#10 2010-01-15 22:10:52
- rewind
- メンバ
- 登録日: 2008-08-28
Re: ウィンドウがでかすぎる！
hir0さんの言っておられるドライバーは、モニターを表示するためのグラフィックドライバーのことです。
こちらの機種をお使いでしょうか?
http://prius.hitachi.co.jp/prius/pc/2001oct/570a/spec.html
もしそうなら
ビデオコントローラーがS3というのが厳しい気がします。
PCI接続のビデオカードを増設してそちらにモニターを接続するという方法も考えられますが、
スリムタイプのPCケースの場合、ビデオカードによっては、ケースに収まらない可能性もあります。
オフライン
#11 2010-01-15 22:33:44
- CMasami
- 拒否
- From: Utsunomiya
- 登録日: 2007-12-13
Re: ウィンドウがでかすぎる！
※規約違反により追放されたユーザの投稿は、ログインユーザにのみ表示されます。
オフライン
#12 2010-01-15 23:15:15
- kyotaro
- メンバ
- 登録日: 2009-11-20
Re: ウィンドウがでかすぎる！
hir0さんへ、テキストエディタの内容です。
↓
X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux kyotaro-PC 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic root=UUID=ca363fa5-caf6-4604-b776-e2261e3bb8ac ro quiet splash
Build Date: 26 October 2009 05:15:02PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 15 23:08:18 2010
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:1:0:0) 5333:8a26:1054:8a26 S3 Inc. ProSavage KM133 rev 3, Mem @ 0xed000000/524288, 0xe0000000/134217728, BIOS @ 0x????????/65536
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default savage Device 0"
Driver "savage"
EndSection
Section "Screen"
Identifier "Builtin Default savage Screen 0"
Device "Builtin Default savage Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
オフライン
#13 2010-01-16 00:43:18
- hir0
- メンバ
- 登録日: 2008-09-28
Re: ウィンドウがでかすぎる！
ねっ:)
rewindさんの方法は（多分）全てがコケたとき（hitoさんのも）に役立つし、CMasamiさんなんてもう、凄いんだから！(ヘルメットの色が変わるんですよ!!! アッでもあれですよ、いろんな方面があり凄い人いっぱいなんですよ）
kyotaroさんへ、ごめんなさい。
Xorg.0.logはもっと、もっと、長いです。
テキストエディタの上部に有る 「編集(E)」から「全て選択」を選んでコピーして下さい。
それとCMasamiさんの指摘されている方向へ話は動くと思いますが、kyotaroさんの理解の出来ないまま進行するかもしれませんが大丈夫です。
解像度を800*600から変更するのが目的なので、最後に何がどうなったのかの報告はするつもりです（私が途中で挫折して他メンバとバトンタッチしなければ）←と言うか他メンバからのアドバイスが有れば試してみて！
取りあえずは、もう一度ログの方を提示してもらえれば助かります。
オフライン
#14 2010-01-16 13:45:51
- kyotaro
- メンバ
- 登録日: 2009-11-20
Re: ウィンドウがでかすぎる！
はい。 分かりました。
まだ、Linuxについては分からないことが多いので、よろしくお願いします。
X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux kyotaro-PC 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-17-generic root=UUID=ca363fa5-caf6-4604-b776-e2261e3bb8ac ro quiet splash
Build Date: 26 October 2009 05:15:02PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 15 23:08:18 2010
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:1:0:0) 5333:8a26:1054:8a26 S3 Inc. ProSavage KM133 rev 3, Mem @ 0xed000000/524288, 0xe0000000/134217728, BIOS @ 0x????????/65536
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default savage Device 0"
Driver "savage"
EndSection
Section "Screen"
Identifier "Builtin Default savage Screen 0"
Device "Builtin Default savage Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default savage Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default savage Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default savage Device 0"
(==) No monitor specified for screen "Builtin Default savage Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "savage"
(II) Loading /usr/lib/xorg/modules/drivers//savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.4.0
ABI class: X.Org Video Driver, version 5.0
(II) SAVAGE: driver (version 2.3.0) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 0.0.2
ABI class: X.Org Video Driver, version 5.0
(EE) open /dev/fb0: No such file or directory
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) SAVAGE(0): Creating default Display subsection in Screen section
"Builtin Default savage Screen 0" for depth/fbbpp 16/16
(==) SAVAGE(0): Depth 16, (--) framebuffer bpp 16
(==) SAVAGE(0): RGB weight 565
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) SAVAGE(0): Using XAA acceleration architecture
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 8192 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Savage4
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: Savage4
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev B
(--) SAVAGE(0): Chip: id 8a26, "ProSavage KM133"
(--) SAVAGE(0): Engine: "ProSavage"
(--) SAVAGE(0): AGP card detected
(==) SAVAGE(0): Using BusType PCI by default
(==) SAVAGE(0): Using PCI DMA
(==) SAVAGE(0): Will try command and vertex DMA mode
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SAVAGE(0): probed videoram: 8192k
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) SAVAGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) SAVAGE(0): I2C bus "I2C bus" initialized.
(II) SAVAGE(0): I2C device "I2C bus:E-EDID segment register" registered at address 0x60.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(--) SAVAGE(0): Detected current MCLK value of 14.318 MHz
(--) SAVAGE(0): Found 11 modes at this depth:
[10e] 320 x 200, 70Hz
[133] 320 x 240, 72Hz
[143] 400 x 300, 72Hz
[153] 512 x 384, 70Hz
[11d] 640 x 400, 70Hz
[111] 640 x 480, 160Hz, 100Hz, 85Hz, 75Hz, 72Hz, 60Hz
[173] 720 x 480, 75Hz, 72Hz
[17e] 720 x 576, 75Hz, 72Hz
[114] 800 x 600, 160Hz, 100Hz, 85Hz, 75Hz, 72Hz, 60Hz, 56Hz
[15d] 848 x 480, 75Hz, 60Hz
[117] 1024 x 768, 130Hz, 100Hz, 85Hz, 75Hz, 72Hz, 70Hz, 60Hz
(II) SAVAGE(0): <default monitor>: Using default hsync range of 31.50-37.90 kHz
(II) SAVAGE(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
(WW) SAVAGE(0): Unable to estimate virtual size
(II) SAVAGE(0): Clock range: 10.00 to 250.00 MHz
(--) SAVAGE(0): No suitable BIOS mode found for 640x350 85Hz.
(II) SAVAGE(0): Not using default mode "640x350" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 320x175 85Hz.
(II) SAVAGE(0): Not using default mode "320x175" (no mode of this name)
(--) SAVAGE(0): Chose mode 11d at 70Hz.
(II) SAVAGE(0): Not using default mode "640x400" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 10e at 70Hz.
(II) SAVAGE(0): Not using default mode "320x200" (vrefresh out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 720x400 85Hz.
(II) SAVAGE(0): Not using default mode "720x400" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 360x200 85Hz.
(II) SAVAGE(0): Not using default mode "360x200" (no mode of this name)
(--) SAVAGE(0): Chose mode 111 at 60Hz.
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(--) SAVAGE(0): Chose mode 111 at 72Hz.
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 111 at 75Hz.
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 111 at 85Hz.
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(II) SAVAGE(0): Not using default mode "320x240" (hsync out of range)
(--) SAVAGE(0): Chose mode 114 at 56Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 114 at 72Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(--) SAVAGE(0): Chose mode 114 at 85Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(--) SAVAGE(0): Chose mode 117 at 70Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(--) SAVAGE(0): Chose mode 117 at 75Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 1152x864 75Hz.
(II) SAVAGE(0): Not using default mode "1152x864" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 75Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1280x960 60Hz.
(II) SAVAGE(0): Not using default mode "1280x960" (no mode of this name)
(--) SAVAGE(0): Chose mode 111 at 60Hz.
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 1280x960 85Hz.
(II) SAVAGE(0): Not using default mode "1280x960" (no mode of this name)
(--) SAVAGE(0): Chose mode 111 at 85Hz.
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 1280x1024 60Hz.
(II) SAVAGE(0): Not using default mode "1280x1024" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 60Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1280x1024 75Hz.
(II) SAVAGE(0): Not using default mode "1280x1024" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 75Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1280x1024 85Hz.
(II) SAVAGE(0): Not using default mode "1280x1024" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 85Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1600x1200 60Hz.
(II) SAVAGE(0): Not using default mode "1600x1200" (no mode of this name)
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 1600x1200 65Hz.
(II) SAVAGE(0): Not using default mode "1600x1200" (no mode of this name)
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 1600x1200 70Hz.
(II) SAVAGE(0): Not using default mode "1600x1200" (no mode of this name)
(--) SAVAGE(0): Chose mode 114 at 72Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 1600x1200 75Hz.
(II) SAVAGE(0): Not using default mode "1600x1200" (no mode of this name)
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 1600x1200 85Hz.
(II) SAVAGE(0): Not using default mode "1600x1200" (no mode of this name)
(--) SAVAGE(0): Chose mode 114 at 85Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 1792x1344 60Hz.
(II) SAVAGE(0): Not using default mode "1792x1344" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 896x672 60Hz.
(II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 896x672 75Hz.
(II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1856x1392 60Hz.
(II) SAVAGE(0): Not using default mode "1856x1392" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 928x696 60Hz.
(II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 928x696 75Hz.
(II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1920x1440 60Hz.
(II) SAVAGE(0): Not using default mode "1920x1440" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 60Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 75Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 832x624 74Hz.
(II) SAVAGE(0): Not using default mode "832x624" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 416x312 74Hz.
(II) SAVAGE(0): Not using default mode "416x312" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1152x864 59Hz.
(II) SAVAGE(0): Not using default mode "1152x864" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 60Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1152x864 70Hz.
(II) SAVAGE(0): Not using default mode "1152x864" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 70Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1152x864 74Hz.
(II) SAVAGE(0): Not using default mode "1152x864" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 74Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1152x864 84Hz.
(II) SAVAGE(0): Not using default mode "1152x864" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 85Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1152x864 85Hz.
(II) SAVAGE(0): Not using default mode "1152x864" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 85Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1152x864 99Hz.
(II) SAVAGE(0): Not using default mode "1152x864" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 100Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1360x768 59Hz.
(II) SAVAGE(0): Not using default mode "1360x768" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 680x384 59Hz.
(II) SAVAGE(0): Not using default mode "680x384" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1360x768 59Hz.
(II) SAVAGE(0): Not using default mode "1360x768" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 680x384 59Hz.
(II) SAVAGE(0): Not using default mode "680x384" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1400x1050 59Hz.
(II) SAVAGE(0): Not using default mode "1400x1050" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 59Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1400x1050 69Hz.
(II) SAVAGE(0): Not using default mode "1400x1050" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 70Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1400x1050 74Hz.
(II) SAVAGE(0): Not using default mode "1400x1050" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 74Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1400x1050 85Hz.
(II) SAVAGE(0): Not using default mode "1400x1050" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 85Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1440x900 59Hz.
(II) SAVAGE(0): Not using default mode "1440x900" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 720x450 59Hz.
(II) SAVAGE(0): Not using default mode "720x450" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1600x1024 60Hz.
(II) SAVAGE(0): Not using default mode "1600x1024" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 800x512 60Hz.
(II) SAVAGE(0): Not using default mode "800x512" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1680x1050 59Hz.
(II) SAVAGE(0): Not using default mode "1680x1050" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 840x525 59Hz.
(II) SAVAGE(0): Not using default mode "840x525" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1680x1050 59Hz.
(II) SAVAGE(0): Not using default mode "1680x1050" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 840x525 60Hz.
(II) SAVAGE(0): Not using default mode "840x525" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1680x1050 69Hz.
(II) SAVAGE(0): Not using default mode "1680x1050" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 840x525 69Hz.
(II) SAVAGE(0): Not using default mode "840x525" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1680x1050 74Hz.
(II) SAVAGE(0): Not using default mode "1680x1050" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 840x525 74Hz.
(II) SAVAGE(0): Not using default mode "840x525" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1680x1050 84Hz.
(II) SAVAGE(0): Not using default mode "1680x1050" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 840x525 85Hz.
(II) SAVAGE(0): Not using default mode "840x525" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1920x1080 59Hz.
(II) SAVAGE(0): Not using default mode "1920x1080" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 960x540 59Hz.
(II) SAVAGE(0): Not using default mode "960x540" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 1920x1200 59Hz.
(II) SAVAGE(0): Not using default mode "1920x1200" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 960x600 59Hz.
(II) SAVAGE(0): Not using default mode "960x600" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 85Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 117 at 75Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 114 at 56Hz.
(--) SAVAGE(0): Chose mode 111 at 60Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(--) SAVAGE(0): Virtual size is 800x600 (pitch 800)
(**) SAVAGE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SAVAGE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) SAVAGE(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) SAVAGE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) SAVAGE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) SAVAGE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) SAVAGE(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) SAVAGE(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
(**) SAVAGE(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) SAVAGE(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
(==) SAVAGE(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 8192 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Savage4
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: Savage4
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev B
(II) SAVAGE(0): 3096 kB of Videoram needed for 3D; 8192 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 16 depth: 16
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] loaded kernel module for "savage" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) SAVAGE(0): [drm] Using the DRM lock SAREA also for drawables.
(II) SAVAGE(0): [drm] framebuffer handle = 0xe0000000
(II) SAVAGE(0): [drm] added 1 reserved context for kernel
(II) SAVAGE(0): X context handle = 0x1
(II) SAVAGE(0): [drm] installed DRM signal handler
(II) SAVAGE(0): [drm] aperture handle = 0xe0000000
(II) SAVAGE(0): [drm] PCI command DMA handle = 0x0f300000
(II) SAVAGE(0): [drm] Enabling ShadowStatus for DRI.
(II) SAVAGE(0): [drm] Status handle = 0x0dddc000
(II) SAVAGE(0): [drm] Status page mapped at 0xb1de0000
(II) SAVAGE(0): [dri] visual configs initialized
(**) SAVAGE(0): DRI is enabled
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): virtualX:800,virtualY:600
(II) SAVAGE(0): bpp:16,tiledwidthBytes:1664,tiledBufferSize:1011712
(II) SAVAGE(0): bpp:16,widthBytes:1664,BufferSize:999424
(II) SAVAGE(0): videoRambytes:0x00800000
(II) SAVAGE(0): textureSize:0x002fd000
(II) SAVAGE(0): textureSize:0x002fd000
(II) SAVAGE(0): textureOffset:0x004e2000
(II) SAVAGE(0): depthOffset:0x003eb000,depthPitch:1664
(II) SAVAGE(0): backOffset:0x002f4000,backPitch:1664
(II) SAVAGE(0): Reserved back buffer at offset 0x2f4000
(II) SAVAGE(0): Reserved depth buffer at offset 0x3eb000
(II) SAVAGE(0): Reserved 3060 kb for textures at offset 0x4e2000
(II) SAVAGE(0): Using 1259 lines for offscreen memory.
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Image Writes
Setting up tile and stipple cache:
30 128x128 slots
6 256x256 slots
(==) SAVAGE(0): Backing store disabled
(II) SAVAGE(0): DPMS enabled
(II) SAVAGE(0): [DRI] installation complete
(II) SAVAGE(0): [junkers]pSAVAGEDRIServer:
(II) SAVAGE(0): [junkers] reserved_map_agpstart:0x00000000
(II) SAVAGE(0): [junkers] reserved_map_idx:0x00000000
(II) SAVAGE(0): [junkers] sarea_priv_offset:0x00000000
(II) SAVAGE(0): [junkers] chipset:0x00000000
(II) SAVAGE(0): [junkers] sgram:0x00000000
(II) SAVAGE(0): [junkers] frontbufferSize:0x000f4000
(II) SAVAGE(0): [junkers] frontOffset:0x00000000
(II) SAVAGE(0): [junkers] frontPitch:0x00000680
(II) SAVAGE(0): [junkers] backbufferSize:0x000f7000
(II) SAVAGE(0): [junkers] backOffset:0x002f4000
(II) SAVAGE(0): [junkers] backPitch:0x00000680
(II) SAVAGE(0): [junkers] depthbufferSize:0x000f7000
(II) SAVAGE(0): [junkers] depthOffset:0x003eb000
(II) SAVAGE(0): [junkers] depthPitch:0x00000680
(II) SAVAGE(0): [junkers] textureOffset:0x004e2000
(II) SAVAGE(0): [junkers] textureSize:0x002fd000
(II) SAVAGE(0): [junkers] textureSize:0x002fd000
(II) SAVAGE(0): [junkers] logTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers] agp:handle:0x00000000
(II) SAVAGE(0): [junkers] agp:offset:0x00000000
(II) SAVAGE(0): [junkers] agp:size:0x00000000
(II) SAVAGE(0): [junkers] agp:map:0x00000000
(II) SAVAGE(0): [junkers] registers:handle:0xed000000
(II) SAVAGE(0): [junkers] registers:offset:0x00000000
(II) SAVAGE(0): [junkers] registers:size:0x00080000
(II) SAVAGE(0): [junkers] registers:map:0x00000000
(II) SAVAGE(0): [junkers] status:handle:0x0dddc000
(II) SAVAGE(0): [junkers] status:offset:0x00000000
(II) SAVAGE(0): [junkers] status:size:0x00001000
(II) SAVAGE(0): [junkers] status:map:0xb1de0000
(II) SAVAGE(0): [junkers] agpTextures:handle:0x00000000
(II) SAVAGE(0): [junkers] agpTextures:offset:0x00000000
(II) SAVAGE(0): [junkers] agpTextures:size:0x00000000
(II) SAVAGE(0): [junkers] apgTextures:map:0x00000000
(II) SAVAGE(0): [junkers] logAgpTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers] cmdDma:handle:0x0f300000
(II) SAVAGE(0): [junkers] cmdDma:offset:0x00000000
(II) SAVAGE(0): [junkers] cmdDma:size:0x00100000
(II) SAVAGE(0): [junkers] cmdDma:map:0x00000000
(II) SAVAGE(0): [junkers]pSAVAGEDRI:
(II) SAVAGE(0): [junkers] chipset:0x00000004
(II) SAVAGE(0): [junkers] width:0x00000320
(II) SAVAGE(0): [junkers] height:0x00000258
(II) SAVAGE(0): [junkers] mem:0x00800000
(II) SAVAGE(0): [junkers] cpp:2
(II) SAVAGE(0): [junkers] zpp:2
(II) SAVAGE(0): [junkers] agpMode:0
(II) SAVAGE(0): [junkers] bufferSize:65536
(II) SAVAGE(0): [junkers] frontbufferSize:0x000f4000
(II) SAVAGE(0): [junkers] frontOffset:0x00000000
(II) SAVAGE(0): [junkers] backbufferSize:0x000f7000
(II) SAVAGE(0): [junkers] backOffset:0x002f4000
(II) SAVAGE(0): [junkers] depthbufferSize:0x000f7000
(II) SAVAGE(0): [junkers] depthOffset:0x003eb000
(II) SAVAGE(0): [junkers] textureOffset:0x004e2000
(II) SAVAGE(0): [junkers] textureSize:0x002c0000
(II) SAVAGE(0): [junkers] logTextureGranularity:0x00000012
(II) SAVAGE(0): [junkers] agpTextureHandle:0x00000000
(II) SAVAGE(0): [junkers] agpTextureSize:0x00000000
(II) SAVAGE(0): [junkers] logAgpTextureGranularity:0x00000020
(II) SAVAGE(0): [junkers] apertureHandle:0xe0000000
(II) SAVAGE(0): [junkers] apertureSize:0x05000000
(II) SAVAGE(0): [junkers] aperturePitch:0x00001000
(II) SAVAGE(0): [junkers] statusHandle:0x0dddc000
(II) SAVAGE(0): [junkers] statusSize:0x00001000
(II) SAVAGE(0): [junkers] sarea_priv_offset:0x00000898
(II) SAVAGE(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: Loaded and initialized /usr/lib/dri/savage_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) config/hal: Adding input device Fujitsu Takamisawa USB Keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Fujitsu Takamisawa USB Keyboard: always reports core events
(**) Fujitsu Takamisawa USB Keyboard: Device: "/dev/input/event3"
(II) Fujitsu Takamisawa USB Keyboard: Found keys
(II) Fujitsu Takamisawa USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Fujitsu Takamisawa USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "jp"
(II) config/hal: Adding input device Fujitsu Takamisawa USB Keyboard
(**) Fujitsu Takamisawa USB Keyboard: always reports core events
(**) Fujitsu Takamisawa USB Keyboard: Device: "/dev/input/event4"
(II) Fujitsu Takamisawa USB Keyboard: Found keys
(II) Fujitsu Takamisawa USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "Fujitsu Takamisawa USB Keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "jp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "jp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "jp"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device ELECOM ELECOM USB mouse with wheel
(**) ELECOM ELECOM USB mouse with wheel: always reports core events
(**) ELECOM ELECOM USB mouse with wheel: Device: "/dev/input/event5"
(II) ELECOM ELECOM USB mouse with wheel: Found 3 mouse buttons
(II) ELECOM ELECOM USB mouse with wheel: Found x and y relative axes
(II) ELECOM ELECOM USB mouse with wheel: Found scroll wheel(s)
(II) ELECOM ELECOM USB mouse with wheel: Configuring as mouse
(**) ELECOM ELECOM USB mouse with wheel: YAxisMapping: buttons 4 and 5
(**) ELECOM ELECOM USB mouse with wheel: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ELECOM ELECOM USB mouse with wheel" (type: MOUSE)
(**) ELECOM ELECOM USB mouse with wheel: (accel) keeping acceleration scheme 1
(**) ELECOM ELECOM USB mouse with wheel: (accel) filter chain progression: 2.00
(**) ELECOM ELECOM USB mouse with wheel: (accel) filter stage 0: 20.00 ms
(**) ELECOM ELECOM USB mouse with wheel: (accel) set acceleration profile 0
(II) ELECOM ELECOM USB mouse with wheel: initialized for relative axes.
オフライン
#15 2010-01-16 14:31:22
- CMasami
- 拒否
- From: Utsunomiya
- 登録日: 2007-12-13
Re: ウィンドウがでかすぎる！
※規約違反により追放されたユーザの投稿は、ログインユーザにのみ表示されます。
オフライン
#17 2010-01-16 17:04:55
- hir0
- メンバ
- 登録日: 2008-09-28
Re: ウィンドウがでかすぎる！
ディスプレイに合った解像度を手書きで明示的に書き足すと思いましたが、ネット上で何やら感じの良い記述を見つけました。
http://d.hatena.ne.jp/gmaxlab/20080503/1209831134
試してみましょう。
端末の操作は慣れていないと思いますけどコピペでトライして下さい。
「アプリケーション」→「アクセサリ」→「端末」を選択、「＄」マークの後から
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup
を入力（コピペ）して、エンター。
ls /etc/X11
を入力（コピペ）して、エンター。
端末にxorg.conf.backup の文字が有ればOKです、次に進みます。
sudo gedit /etc/X11/xorg.conf
を入力（コピペ）して、エンター。
テキストエディタが開き、前半が＃の付いた文字で後半がしたの様になっていると思いますので太字の一行を追加して保存再起動してみて下さい。
Section "Device"
Identifier "Configured Video Device"
Option "CRTOnly" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
この設定ファイルはハードに合わないとデスクトップが表示され無かったり多重に映し出されたりします。
その中で試行錯誤の設定の調整になるかもしれませんが、その時は最初に作成したxorg.conf.backupを使用して元に戻せますので驚かないでね。
オフライン
#18 2010-01-16 20:20:39
- kyotaro
- メンバ
- 登録日: 2009-11-20
Re: ウィンドウがでかすぎる！
cp: stat `/etc/X11/xorg.conf'を実行できません: No such file or directory
と出てきてしまいます。
オフライン
#19 2010-01-17 12:31:53
- hir0
- メンバ
- 登録日: 2008-09-28
Re: ウィンドウがでかすぎる！
すみません。
$ sudo gedit /etc/X11/xorg.conf
と実行すると白紙のテキストエディタが開くのでコピペして保存して下さい。
保存先やファイル名はテキストエディタを開いたときに指定しているので「保存」だけで大丈夫です。
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
それから、改めて#17を実行してみて下さい。 なぜ直接「Option "CRTOnly" "true"」を書き込んだものを保存しないかは、もしもの時のリカバリのやり取りを容易にする為です。
ただ、この方法は多く使われているとは思われますが正規の方法では無く、
正しくはコマンドでシステムから生成する様です。
https://forums.ubuntulinux.jp/viewtopic.php?pid=47435#p47435
こちらのURLを参考にされるなら
$ sudo service gdm stop
$ sudo Xorg -configure
$ sudo mv ~/xorg.conf.new /etc/X11/xorg.conf
$ sudo service gdm start
この4行をメモして下さい。
gdm stop でグラフィカルな部分が停止して真っ黒な画面になります（驚かないでね）ので
まず最初に「ctrl」+「alt」+「F1」を押して下さい。
そこで通常の様にログインします。現在のユーザー名とパスワードでOKです。
上記の4行を順番に実行すれば、最後のgdm start でデスクトップ画面が現れます。
途中で元の画面に戻るには「ctrl」+「alt」+「F7」ですが gdm stop の後だと再起動かgdmをstart させなければ行けません。 万一の時は $ sudo reboot コマンドで再起動してください。
オフライン
2007年10月11日以降の投稿は、クリエイティブ・コモンズ-表示-継承-3.0 (Cc-by-sa-3.0)で提供されます。
著作権等の他者の権利を不当に侵害するような投稿、特定の個人や団体などへの誹謗中傷を含む投稿、個人情報を含む投稿など、違法性のある投稿は行わないでください。
Ubuntu and Canonical are registered trademarks of Canonical Ltd.