お知らせ

  • 利用規約を守って投稿してください。また、よくある質問および投稿の手引きも参照してください。
  • メッセージの投稿にはアカウントが必要です。未登録の方は、ユーザ登録ページからアカウントを作成することができます。

#1 2010-06-19 23:01:49

ester
新しいメンバ
登録日: 2010-06-19

NetwalkerにCompiz導入

初めまして
初めてこちらで質問させて頂きます

表題の件なのですが、Compizを導入したのですが正常に動いていないようなのです
Compizを導入する際Compiz Fusion、Emeraldも導入しました
Compiz Fusion Iconを入れると画面が真っ白になるとの報告がありましたので導入しましたが自動起動に設定していません

/システム/設定/外観の設定の視覚効果のタブが非表示になっていたため、設定エディタの
/apps/metacity/general/compositing_managerをTrueにしています
また、端末にて
compiz --replace
を実行するとエラーが出ていたため
/apps/metacity/general/switch_to_workspace_downと
/apps/metacity/general/switch_to_workspace_upをdisableからdisabledに変えました

この状態で再度
compiz --replaceを実行すると

$ compiz --replace
Checking for Xgl: not present.
xset q doesn't reveal the location of the log file. Using fallback /var/log/Xorg.0.log No whitelisted driver found aborting and using fallback: /usr/bin/metacity

となります

fglrxinfoを実行しようと思いましたが見あたらず、導入出来ませんでした
誰か解決策がわかりますでしょうか?
よろしくお願いします

以下Xorg.0.log

コード:

$ cat /var/log/Xorg.0.log

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30versatile1 armv7l Ubuntu Current Operating System: Linux netwalker 2.6.28-15-araneo #50fsl1araneo19-Ubuntu PREEMPT Mon Jan 25 15:54:27 UTC 2010 armv7l Build Date: 13 July 2009 08:06:39PM xorg-server 2:1.6.0-0ubuntu16netbook3 (buildd@) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 19 17:32:00 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xd90
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(II) Open APM successful
(II) System resource ranges:
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
Primary device is not PCI
(==) Matched fbdev for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 0.4.0 ABI class: X.Org Video Driver, version 5.0
(II) FBDEV: driver for framebuffer: fbdev
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.0.2 ABI class: X.Org Video Driver, version 5.0
(II) FBDEV(0): using default device
(II) Running in FRAMEBUFFER Mode
(II) FBDEV(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 16/16
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
(==) FBDEV(0): RGB weight 565
(==) FBDEV(0): Default visual is TrueColor
(==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBDEV(0): hardware: DISP3 BG (video memory: 2400kB)
(II) FBDEV(0): checking modes against framebuffer device...
(II) FBDEV(0): checking modes against monitor...
(--) FBDEV(0): Virtual size is 1024x600 (pitch 1024)
(**) FBDEV(0): Built-in mode "current": 33.2 MHz, 31.0 kHz, 51.0 Hz
(II) FBDEV(0): Modeline "current"x0.0 33.25 1024 1044 1052 1072 600 602
606 608 -hsync -vsync -csync (31.0 kHz)
(==) FBDEV(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4
(**) FBDEV(0): using shadow framebuffer
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.1.0 ABI class: X.Org ANSI C Emulation, version 0.4
(==) FBDEV(0): Backing store disabled
(II) FBDEV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device SHARP USB Keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0
(**) SHARP USB Keyboard: always reports core events
(**) SHARP USB Keyboard: Device: "/dev/input/event6"
(II) SHARP USB Keyboard: Found keys
(II) SHARP USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "SHARP USB Keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) SHARP USB Keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "jp106"
(**) SHARP USB Keyboard: xkb_model: "jp106"
(**) Option "xkb_layout" "jp,jp"
(**) SHARP USB Keyboard: xkb_layout: "jp,jp"
(**) Option "xkb_variant" "106,"
(**) SHARP USB Keyboard: xkb_variant: "106,"
(**) Option "xkb_options" "grp_led:scroll"
(**) SHARP USB Keyboard: xkb_options: "grp_led:scroll"
(II) config/hal: Adding input device SHARP USB Keyboard
(**) SHARP USB Keyboard: always reports core events
(**) SHARP USB Keyboard: Device: "/dev/input/event5"
(II) SHARP USB Keyboard: Found keys
(II) SHARP USB Keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "SHARP USB Keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) SHARP USB Keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "jp106"
(**) SHARP USB Keyboard: xkb_model: "jp106"
(**) Option "xkb_layout" "jp,jp"
(**) SHARP USB Keyboard: xkb_layout: "jp,jp"
(**) Option "xkb_variant" "106,"
(**) SHARP USB Keyboard: xkb_variant: "106,"
(**) Option "xkb_options" "grp_led:scroll"
(**) SHARP USB Keyboard: xkb_options: "grp_led:scroll"
(II) config/hal: Adding input device mxc_etk
(**) mxc_etk: always reports core events
(**) mxc_etk: Device: "/dev/input/event0"
(II) mxc_etk: Found keys
(II) mxc_etk: Configuring as keyboard
(II) XINPUT: Adding extended input device "mxc_etk" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) mxc_etk: xkb_rules: "evdev"
(**) Option "xkb_model" "jp106"
(**) mxc_etk: xkb_model: "jp106"
(**) Option "xkb_layout" "jp,jp"
(**) mxc_etk: xkb_layout: "jp,jp"
(**) Option "xkb_variant" "106,"
(**) mxc_etk: xkb_variant: "106,"
(**) Option "xkb_options" "grp_led:scroll"
(**) mxc_etk: xkb_options: "grp_led:scroll"
(II) config/hal: Adding input device oj6sh
(**) oj6sh: always reports core events
(**) oj6sh: Device: "/dev/input/event1"
(II) oj6sh: Found 2 mouse buttons
(II) oj6sh: Found x and y relative axes
(II) oj6sh: Configuring as mouse
(**) oj6sh: YAxisMapping: buttons 4 and 5
(**) oj6sh: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "oj6sh" (type: MOUSE)
(**) oj6sh: (accel) keeping acceleration scheme 1
(**) oj6sh: (accel) filter chain progression: 2.00
(**) oj6sh: (accel) filter stage 0: 20.00 ms
(**) oj6sh: (accel) set acceleration profile 0
(II) config/hal: Adding input device mxc_ts
(II) LoadModule: "evtouch"
(II) Loading /usr/lib/xorg/modules/input//evtouch_drv.so
(II) Module evtouch: vendor="Kenan Esau"
compiled for 1.6.0, module version = 0.8.8 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0
State: S_UNTOUCHED Action: No Action Button: 0
State: S_TOUCHED Action: No Action Button: 0
State: S_LONGTOUCHED Action: down Button: 1
State: S_MOVING Action: No Action Button: 0
State: S_MAYBETAPPED Action: click Button: 1
State: S_ONEANDAHALFTAP Action: down Button: 3
(**) Option "MinX" "0"
(**) Option "MaxX" "1024"
(**) Option "MinY" "0"
(**) Option "MaxY" "600"
(**) Option "LongtouchTimer" "1"
(**) Option "MoveLimit" "1"
(**) Option "x0" "-2"
(**) Option "y0" "-7"
(**) Option "x1" "-1"
(**) Option "y1" "-4"
(**) Option "x2" "3"
(**) Option "y2" "-5"
(**) Option "x3" "0"
(**) Option "y3" "-4"
(**) Option "x4" "-2"
(**) Option "y4" "0"
(**) Option "x5" "0"
(**) Option "y5" "-4"
(**) Option "x6" "2"
(**) Option "y6" "0"
(**) Option "x7" "2"
(**) Option "y7" "0"
(**) Option "x8" "-1"
(**) Option "y8" "-3"
(**) EVTouch TouchScreen: always reports core events
(II) XINPUT: Adding extended input device "EVTouch TouchScreen" (type:
TOUCHSCREEN)
(**) EVTouch TouchScreen: (accel) keeping acceleration scheme 1
(**) EVTouch TouchScreen: (accel) filter chain progression: 2.00
(**) EVTouch TouchScreen: (accel) filter stage 0: 20.00 ms
(**) EVTouch TouchScreen: (accel) set acceleration profile 0
(**) Option "Device" "/dev/input/event4"
(II) Open APM successful
(II) SHARP USB Keyboard: Device reopened after 1 attempts.
(II) SHARP USB Keyboard: Device reopened after 1 attempts.
(II) mxc_etk: Device reopened after 1 attempts.
(II) oj6sh: Device reopened after 1 attempts.
(II) Open APM successful
(II) SHARP USB Keyboard: Device reopened after 1 attempts.
(II) SHARP USB Keyboard: Device reopened after 1 attempts.
(II) mxc_etk: Device reopened after 1 attempts.
(II) oj6sh: Device reopened after 1 attempts.
(II) Open APM successful
(II) SHARP USB Keyboard: Device reopened after 1 attempts.
(II) SHARP USB Keyboard: Device reopened after 1 attempts.
(II) mxc_etk: Device reopened after 1 attempts.
(II) oj6sh: Device reopened after 1 attempts.

$ cat /var/log/Xorg.0.log | grep LoadModule
(II) LoadModule: "extmod"
(II) LoadModule: "dbe"
(II) LoadModule: "glx"
(II) LoadModule: "record"
(II) LoadModule: "dri"
(II) LoadModule: "dri2"
(II) LoadModule: "fbdev"
(II) LoadModule: "fbdevhw"
(II) LoadModule: "fb"
(II) LoadModule: "shadow"
(II) LoadModule: "evdev"
(II) LoadModule: "evtouch"

オフライン

 

Board footer

Powered by FluxBB