お知らせ

  • 利用規約を守って投稿してください。また、よくある質問および投稿の手引きも参照してください。
  • メッセージの投稿にはアカウントが必要です。未登録の方は、ユーザ登録ページからアカウントを作成することができます。

ページ: 1 2

 

#1 2011-12-03 14:07:17

M/kato
メンバ
登録日: 2008-03-30

11.10でBLASTER５.１VXの《音》を出したい。

11。１０へのバージョンアップから「音」で悩んでます。
以前、・・志向でも「音」を出せず、表題にしてるクリエイテェブ
へと変更をしたのです。　
W７も稼働させてますので、そちらに問題は有りませんがUｂｕｎｔｕ
だと「音」が出ないのです。・・志向でもW７は「音」も出てますけど、
エコーが酷くて替えました。しかし、Uｂｕｎｔｕだと「音」が出ないのです。
何方かCREATIVE　Sound Blastrer 5.1VX で「音」を出せる方法
を教えて戴けませんでしょうか？。　
なお、cat /proc/asound/cardsでは
0 [NVidia         ]: HDA-Intel - HDA NVidia
                      HDA NVidia at 0xd9000000 irq 16
となり、aplay -l　でも
カード 0: NVidia [HDA NVidia], デバイス 3: HDMI 0 [HDMI 0]
  サブデバイス: 1/1
  サブデバイス #0: subdevice #0
カード 0: NVidia [HDA NVidia], デバイス 7: HDMI 0 [HDMI 0]
  サブデバイス: 1/1
  サブデバイス #0: subdevice #0
カード 0: NVidia [HDA NVidia], デバイス 8: HDMI 0 [HDMI 0]
  サブデバイス: 1/1
  サブデバイス #0: subdevice #0
カード 0: NVidia [HDA NVidia], デバイス 9: HDMI 0 [HDMI 0]
  サブデバイス: 1/1
  サブデバイス #0: subdevice #0
となってて、CREATIVE　Sound Blastrer 5.1VXが認識出来て無い
様なのです。　この辺の問題も解決したく宜しくお願い致します。

オフライン

 

#2 2011-12-04 13:20:13

koisan1949
メンバ
From: Hyogo, Japan
登録日: 2007-11-11

Re: 11.10でBLASTER５.１VXの《音》を出したい。

私のサウンド・デバイスもSound Blastrerですが、古いボードで16bit仕様です。
こちらのデバイスでは何ら問題なく動作します。

説明はこちらを参考にしてください。もしかしたら、この内容で対処できるかもです。。。
https://wiki.ubuntulinux.jp/UbuntuTips/ … leshooting
Sound Blastrer 5.1VXのchipは、24bit仕様のCA0106が使われているので、
AlsaProjectの皆さんが努力されており、Ubuntu11.10への対応にそれなりの時間が必要なのではと推測します。
http://www.alsa-project.org/main/index.php/Main_Page

最新版のalsa-driverをdownloadしてコンパイルし、モジュールを入れ替えたら動作するかもしれません。
こちらに似たようなボードで苦労した経験を記載しています。
コンパイルの仕方の事例を載せていますので、挑戦されるのなら誰かがアドバイスしてくれるでしょう。。。
https://forums.ubuntulinux.jp/viewtopic … 356#p59356

オフライン

 

#3 2011-12-05 22:14:55

M/kato
メンバ
登録日: 2008-03-30

Re: 11.10でBLASTER５.１VXの《音》を出したい。

koisan1949　様　　大変有り難うございます。
https://wiki.ubuntulinux.jp/UbuntuTips/ … leshooting　　の事は、
別のことから存じておりまして一応実施してみました。しかし、サウンドデバイスが
旨く認識できておらず駄目でした。
0a:02.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster
   Subsystem: Creative Labs Device 1004
   Flags:bus master,medium devsel,latency 32,IRQ 5
   I/O ports at 6000 [size=32]
   Capabilities:<access denied>
   Kernel modules: snd-ca0106
と為ってます。　このaccess　deniedを如何にすると変更出来るのでしょうか？。
　　　　　　　　　　宜しくお願い致します。

オフライン

 

#4 2011-12-06 19:15:15

koisan1949
メンバ
From: Hyogo, Japan
登録日: 2007-11-11

Re: 11.10でBLASTER５.１VXの《音》を出したい。

なるほどハード的には認識されているが、alsaレベルで認識されていない様ですね。
取り敢えず、alsaのバージョンはどうなっていますか?
$ cat /proc/asound/version　の結果を提示してください。

少し前のUbuntuバージョンでは、自動認識され動作していたようなので、
CA0106本体のモジュールのプログラムに問題なく、カーネルがアップしようが稼働すると想定されます。
そこで、今回のカーネルでは自動認識しないため、適切なモジュール自体が組み込まれず、
必然的に音が鳴らないのだと考えます。
よって、CA0160を意図的に指定してモジュールを作成し、カーネルに組み込めば動作すると推察します。
ここらは、私より詳しい方のコメントを期待します。

オフライン

 

#5 2011-12-07 09:57:49

M/kato
メンバ
登録日: 2008-03-30

Re: 11.10でBLASTER５.１VXの《音》を出したい。

koisan1949　様　　お早うございます。　度々本当に有り難うございます。
$ cat /proc/asound/versionの結果は、
Advanced Linux Sound Architecture Driver Version 1.0.24.
ですが、「自動認識しないため、適切なモジュール自体が組み込まれ」て無い
ので認識されなず「音」も出ないと云う事なのですね。　
是を認識させて稼働可能にするのはどの様にするのでしょう？。
何方かお解りになってるお方が、いらっしゃるならお教え戴けませんでしょうか。

オフライン

 

#6 2011-12-07 22:25:10

koisan1949
メンバ
From: Hyogo, Japan
登録日: 2007-11-11

Re: 11.10でBLASTER５.１VXの《音》を出したい。

$ cat /proc/asound/versionの結果は、
Advanced Linux Sound Architecture Driver Version 1.0.24.

0a:02.0 Multimedia audio controller: Creative Labs CA0106 Soundblaster
   Subsystem: Creative Labs Device 1004
   Flags:bus master,medium devsel,latency 32,IRQ 5
   I/O ports at 6000 [size=32]
   Capabilities:<access denied>
   Kernel modules: snd-ca0106
これらの結果から、最新版のalsa driverは1.0.24だし、カーネル・モジュールもsnd-ca0106が適用されています。
でもモジュールからSoundblaster 5.1VXが認識されていません。

ソースコードをdownloadしてコンパイルして、モジュールを作成しても同様の結果になります。
よって、現時点では諦めてください。
努力されているので、alsa-projectの次期バージョンが出るのを期待するしかないと思います。

音は取り敢えずグラボのNVidiaのHDMIが認識されているので、こちらから取り出すしかないようです。

オフライン

 

#7 2011-12-07 23:22:34

Mocchi
管理者
登録日: 2009-05-17

Re: 11.10でBLASTER５.１VXの《音》を出したい。

koisan1949さんのおっしゃるとおり、現状では諦めるほかないでしょう。このフォーラムでも「Creative Sound Blastrer 5.1VX」は導入失敗事例がそれなりの数報告されています。

ただ、ちょっと参考のために3点ほど教えていただきたいのですが

1.端末を開いて以下のコマンドを実行して下さい。出力結果に「snd-ca0106」が含まれているか確認して下さい。
$ lsmod;

2. もし含まれていたら、以下のファイルが自動で作成されています。Nautilusなどのファイルビューワーでファイルをクリックして下さい。たぶんテキストエディタなどが開いて内容を見ることができます。その内容をコピペして教えて下さい。
ファイル「/sys/module/snd_ca0106/parameters/subsystem」

3. 同じくNautilusなどのファイルビューワーで以下のファイルをクリックして内容を見てください。そして、内容をコピペして教えて下さい。なるべく起動直後が好ましいです。
ファイル「/var/log/dmesg」

以上、よろしくお願いします。

オフライン

 

#8 2011-12-08 12:46:17

M/kato
メンバ
登録日: 2008-03-30

Re: 11.10でBLASTER５.１VXの《音》を出したい。

Mocciさん　koisan1949さん　　誠に有り難いご助力感謝しております。
大変長いので分割して送ります。lsmodとsubsystemを一つにしdmesgは
２～３分割に致します。６４kを超えると思いますので・・・
lsmodは次の様に為ってます。

コード:

Module                  Size  Used by
vesafb                 13489  1 
rfcomm                 38408  0 
bnep                   17923  2 
bluetooth             148839  10 rfcomm,bnep
arc4                   12473  2 
rt73usb                27029  0 
snd_hda_codec_hdmi     31426  4 
crc_itu_t              12627  1 rt73usb
rt2x00usb              20092  1 rt73usb
rt2x00lib              48114  2 rt73usb,rt2x00usb
ppdev                  12849  0 
binfmt_misc            17292  1 
mac80211              393459  2 rt2x00usb,rt2x00lib
snd_hda_intel          24262  1 
snd_hda_codec          91754  2 snd_hda_codec_hdmi,snd_hda_intel
nvidia              10390874  40 
cfg80211              172392  2 rt2x00lib,mac80211
snd_hwdep              13276  1 snd_hda_codec
snd_seq_midi           13132  0 
snd_ca0106             53453  1 
snd_ac97_codec        106082  1 snd_ca0106
ac97_bus               12642  1 snd_ac97_codec
snd_rawmidi            25241  2 snd_seq_midi,snd_ca0106
psmouse                73673  0 
snd_pcm                80468  5 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_ca0106,snd_ac97_codec
snd_seq_midi_event     14475  1 snd_seq_midi
serio_raw              12990  0 
snd_seq                51567  2 snd_seq_midi,snd_seq_midi_event
xgifb                 157711  1 
snd_timer              28932  2 snd_pcm,snd_seq
parport_pc             32114  1 
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq
snd                    55902  13 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_ca0106,snd_ac97_codec,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore              12600  1 snd
snd_page_alloc         14115  3 snd_hda_intel,snd_ca0106,snd_pcm
i3000_edac             12911  0 
edac_core              46858  3 i3000_edac
lp                     17455  0 
parport                40930  3 ppdev,parport_pc,lp
usbhid                 41905  0 
hid                    77367  1 usbhid
e1000e                139814  0

subsystemは総ての「０」でして３２箇です。
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
　　　以上　　　其の壱。

最後の編集者: Mocchi (2011-12-09 09:51:42)

オフライン

 

#9 2011-12-08 12:54:27

M/kato
メンバ
登録日: 2008-03-30

Re: 11.10でBLASTER５.１VXの《音》を出したい。

次にdmesgを送ります。　大き過ぎた場合は分割します。

コード:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.0-13-generic (buildd@rothera) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #22-Ubuntu SMP Wed Nov 2 13:25:36 UTC 2011 (Ubuntu 3.0.0-13.22-generic 3.0.6)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fe70000 (usable)
[    0.000000]  BIOS-e820: 000000007fe70000 - 000000007fe7a000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007fe7a000 - 000000007fe7b000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007fe7b000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] DMI present.
[    0.000000] DMI: NEC               Express5800/110Gd [N8100-1279Y]                       /5MMSV-RH         , BIOS 1.0.0024 02/20/2008
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x7fe70 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[    0.000000] total RAM covered: 2047M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K     chunk_size: 2M     num_reg: 2      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[    0.000000] found SMP MP-table at [c00f6da0] f6da0
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[    0.000000] RAMDISK: 365f0000 - 372f0000
[    0.000000] ACPI: RSDP 000f6d20 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 7fe73524 0004C (v01 PTLTD  ? XSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 7fe79e4e 000F4 (v03 INTEL  Muklteo2 06040000 ALEX 00000001)
[    0.000000] ACPI: DSDT 7fe74975 05465 (v01  INTEL MUKLTEO2 06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 7fe7afc0 00040
[    0.000000] ACPI: MCFG 7fe79f42 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: APIC 7fe79f7e 0005A (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 7fe79fd8 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 7fe73570 01405 (v01  PmRef    CpuPm 00003000 INTL 20050228)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1158MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007fe70
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0007fe70
[    0.000000] On node 0 totalpages: 523773
[    0.000000] free_area_init_node: node 0, pgdat c17b3280, node_mem_map f55f0200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3949 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2317 pages used for memmap
[    0.000000]   HighMem zone: 294245 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 12 pages/cpu @f5000000 s26240 r0 d22912 u4194304
[    0.000000] pcpu-alloc: s26240 r0 d22912 u4194304 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519680
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-13-generic root=UUID=837a6757-811c-469b-85e8-87d134d926a4 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 8381952 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0007fe70)
[    0.000000] Memory: 2046768k/2095552k available (5330k kernel code, 48324k reserved, 2596k data, 696k init, 1186248k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc17be000 - 0xc186c000   ( 696 kB)
[    0.000000]       .data : 0xc1534ac4 - 0xc17bde40   (2596 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1534ac4   (5330 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f4408000 soft=f440a000
[    0.000000] Extended CMOS year: 2000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2933.260 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.52 BogoMIPS (lpj=11733040)
[    0.004011] pid_max: default: 32768 minimum: 301
[    0.004041] Security Framework initialized
[    0.004068] AppArmor: AppArmor initialized
[    0.004071] Yama: becoming mindful.
[    0.004149] Mount-cache hash table entries: 512
[    0.004319] Initializing cgroup subsys cpuacct
[    0.004328] Initializing cgroup subsys memory
[    0.004341] Initializing cgroup subsys devices
[    0.004345] Initializing cgroup subsys freezer
[    0.004348] Initializing cgroup subsys net_cls
[    0.004351] Initializing cgroup subsys blkio
[    0.004363] Initializing cgroup subsys perf_event
[    0.004410] CPU0: Hyper-Threading is disabled
[    0.004415] mce: CPU supports 4 MCE banks
[    0.004428] CPU0: Thermal monitoring handled by SMI
[    0.004434] using mwait in idle threads.
[    0.004715] SMP alternatives: switching to UP code
[    0.017846] Freeing SMP alternatives: 24k freed
[    0.017865] ACPI: Core revision 20110413
[    0.021394] ftrace: allocating 24888 entries in 49 pages
[    0.024089] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.024419] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.064409] CPU0: Intel(R) Celeron(R) CPU 2.93GHz stepping 09
[    0.068003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.068003] ... version:                0
[    0.068003] ... bit width:              40
[    0.068003] ... generic registers:      18
[    0.068003] ... value mask:             000000ffffffffff
[    0.068003] ... max period:             0000007fffffffff
[    0.068003] ... fixed-purpose events:   0
[    0.068003] ... event mask:             000000000003ffff
[    0.068003] Brought up 1 CPUs
[    0.068003] Total of 1 processors activated (5866.52 BogoMIPS).
[    0.068003] devtmpfs: initialized
[    0.068003] PM: Registering ACPI NVS region at 7fe7a000 (4096 bytes)
[    0.068802] print_constraints: dummy: 
[    0.068833] Time:  9:33:55  Date: 12/08/11
[    0.068891] NET: Registered protocol family 16
[    0.069065] EISA bus registered
[    0.069080] ACPI: bus type pci registered
[    0.069167] PCI: MMCONFIG for domain 0000 [bus 00-09] at [mem 0xe0000000-0xe09fffff] (base 0xe0000000)
[    0.069173] PCI: MMCONFIG at [mem 0xe0000000-0xe09fffff] reserved in E820
[    0.069176] PCI: Using MMCONFIG for extended config space
[    0.069178] PCI: Using configuration type 1 for base access
[    0.070673] bio: create slab <bio-0> at 0
[    0.071736] ACPI: EC: Look up EC in DSDT
[    0.074763] ACPI: Interpreter enabled
[    0.074775] ACPI: (supports S0 S1 S4 S5)
[    0.074800] ACPI: Using IOAPIC for interrupt routing
[    0.080299] ACPI: No dock devices found.
[    0.080304] HEST: Table not found.
[    0.080311] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.081322] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-353)
[    0.081334] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.081336] _OSC request data:1 8 1f 
[    0.081343] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.083116] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[    0.083121] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.083125] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    0.083128] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.083132] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.083135] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.083139] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    0.083143] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff]
[    0.083147] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xfdff]
[    0.083169] pci 0000:00:00.0: [8086:2778] type 0 class 0x000600
[    0.083233] pci 0000:00:01.0: [8086:2779] type 1 class 0x000604
[    0.083283] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.083288] pci 0000:00:01.0: PME# disabled
[    0.083341] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[    0.083414] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.083419] pci 0000:00:1c.0: PME# disabled
[    0.083450] pci 0000:00:1c.4: [8086:27e0] type 1 class 0x000604
[    0.083522] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.083527] pci 0000:00:1c.4: PME# disabled
[    0.083559] pci 0000:00:1c.5: [8086:27e2] type 1 class 0x000604
[    0.083631] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.083636] pci 0000:00:1c.5: PME# disabled
[    0.083663] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[    0.083714] pci 0000:00:1d.0: reg 20: [io  0x3000-0x301f]
[    0.083752] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[    0.083803] pci 0000:00:1d.1: reg 20: [io  0x3020-0x303f]
[    0.083841] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[    0.083892] pci 0000:00:1d.2: reg 20: [io  0x3040-0x305f]
[    0.083929] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[    0.083980] pci 0000:00:1d.3: reg 20: [io  0x3060-0x307f]
[    0.084048] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[    0.084073] pci 0000:00:1d.7: reg 10: [mem 0xd9800000-0xd98003ff]
[    0.084159] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.084164] pci 0000:00:1d.7: PME# disabled
[    0.084187] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    0.084260] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
[    0.084366] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.084376] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.084383] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.084390] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[    0.084434] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[    0.084451] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.084463] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.084475] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.084487] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.084499] pci 0000:00:1f.1: reg 20: [io  0x30a0-0x30af]
[    0.084542] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[    0.084560] pci 0000:00:1f.2: reg 10: [io  0x30e8-0x30ef]
[    0.084571] pci 0000:00:1f.2: reg 14: [io  0x30dc-0x30df]
[    0.084582] pci 0000:00:1f.2: reg 18: [io  0x30e0-0x30e7]
[    0.084592] pci 0000:00:1f.2: reg 1c: [io  0x30d8-0x30db]
[    0.084603] pci 0000:00:1f.2: reg 20: [io  0x30b0-0x30bf]
[    0.084614] pci 0000:00:1f.2: reg 24: [mem 0xd9800400-0xd98007ff]
[    0.084643] pci 0000:00:1f.2: PME# supported from D3hot
[    0.084648] pci 0000:00:1f.2: PME# disabled
[    0.084665] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[    0.084727] pci 0000:00:1f.3: reg 20: [io  0x3080-0x309f]
[    0.084827] pci 0000:01:00.0: [10cf:2036] type 0 class 0x000480
[    0.084856] pci 0000:01:00.0: reg 10: [mem 0xd9100000-0xd9107fff 64bit]
[    0.084879] pci 0000:01:00.0: reg 18: [mem 0xd9200000-0xd93fffff 64bit]
[    0.084955] pci 0000:01:00.0: PME# supported from D0
[    0.084961] pci 0000:01:00.0: PME# disabled
[    0.092028] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.092034] pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
[    0.092039] pci 0000:00:01.0:   bridge window [mem 0xd9100000-0xd93fffff]
[    0.092046] pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.092118] pci 0000:02:00.0: [10de:0a65] type 0 class 0x000300
[    0.092139] pci 0000:02:00.0: reg 10: [mem 0xd8000000-0xd8ffffff]
[    0.092160] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.092181] pci 0000:02:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.092195] pci 0000:02:00.0: reg 24: [io  0x4000-0x407f]
[    0.092210] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[    0.092295] pci 0000:02:00.1: [10de:0be3] type 0 class 0x000403
[    0.092315] pci 0000:02:00.1: reg 10: [mem 0xd9000000-0xd9003fff]
[    0.100029] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.100036] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.100042] pci 0000:00:1c.0:   bridge window [mem 0xd8000000-0xd90fffff]
[    0.100050] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.100132] pci 0000:03:00.0: [8086:109a] type 0 class 0x000200
[    0.100161] pci 0000:03:00.0: reg 10: [mem 0xd9500000-0xd951ffff]
[    0.100199] pci 0000:03:00.0: reg 18: [io  0x5000-0x501f]
[    0.100326] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.100334] pci 0000:03:00.0: PME# disabled
[    0.100367] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.100385] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[    0.100390] pci 0000:00:1c.4:   bridge window [io  0x5000-0x5fff]
[    0.100396] pci 0000:00:1c.4:   bridge window [mem 0xd9500000-0xd95fffff]
[    0.100404] pci 0000:00:1c.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    0.100457] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[    0.100462] pci 0000:00:1c.5:   bridge window [io  0x0000-0x0000] (disabled)
[    0.100468] pci 0000:00:1c.5:   bridge window [mem 0x00000000-0x000fffff] (disabled)
[    0.100476] pci 0000:00:1c.5:   bridge window [mem 0x00000000-0x000fffff pref] (disabled)
[    0.100520] pci 0000:0a:02.0: [1102:0007] type 0 class 0x000401
[    0.100542] pci 0000:0a:02.0: reg 10: [io  0x6000-0x601f]
[    0.100624] pci 0000:0a:02.0: supports D1 D2
[    0.100650] pci 0000:0a:03.0: [18ca:0020] type 0 class 0x000300
[    0.100671] pci 0000:0a:03.0: reg 10: [mem 0xd4000000-0xd7ffffff pref]
[    0.100684] pci 0000:0a:03.0: reg 14: [mem 0xd9400000-0xd943ffff]
[    0.100697] pci 0000:0a:03.0: reg 18: [io  0x6080-0x60ff]
[    0.100759] pci 0000:0a:03.0: supports D1 D2
[    0.100810] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
[    0.100816] pci 0000:00:1e.0:   bridge window [io  0x6000-0x6fff]
[    0.100821] pci 0000:00:1e.0:   bridge window [mem 0xd9400000-0xd94fffff]
[    0.100830] pci 0000:00:1e.0:   bridge window [mem 0xd4000000-0xd7ffffff 64bit pref]
[    0.100834] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.100837] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.100841] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.100844] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.100848] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.100852] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.100855] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.100859] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
[    0.100862] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xfdff] (subtractive decode)
[    0.100890] pci_bus 0000:00: on NUMA node 0
[    0.100898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.101121] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    0.101200] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.101273] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[    0.101347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
[    0.101420] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.101678] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-353)
[    0.101689] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.101691] _OSC request data:1 1f 1f 
[    0.101699]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.101784] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-353)
[    0.101794] \_SB_.PCI0:_OSC evaluation returned wrong type
[    0.101796] _OSC request data:1 0 1d 
[    0.101803]  pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d
[    0.101805] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.106069] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *10 11 14 15)
[    0.106150] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 10 11 14 15)
[    0.106225] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15)
[    0.106300] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 11 14 15) *5
[    0.106381] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled.
[    0.106460] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled.
[    0.106542] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled.
[    0.106623] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 *10 11 14 15)
[    0.106795] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.106805] vgaarb: device added: PCI:0000:0a:03.0,decodes=io+mem,owns=none,locks=none
[    0.106808] vgaarb: loaded
[    0.106811] vgaarb: bridge control possible 0000:0a:03.0
[    0.106813] vgaarb: bridge control possible 0000:02:00.0
[    0.107152] SCSI subsystem initialized
[    0.107245] libata version 3.00 loaded.
[    0.107326] usbcore: registered new interface driver usbfs
[    0.107343] usbcore: registered new interface driver hub
[    0.107399] usbcore: registered new device driver usb
[    0.107555] PCI: Using ACPI for IRQ routing
[    0.107726] PCI: pci_cache_line_size set to 64 bytes
[    0.107829] reserve RAM buffer: 000000000009dc00 - 000000000009ffff 
[    0.107833] reserve RAM buffer: 000000007fe70000 - 000000007fffffff 
[    0.107987] NetLabel: Initializing
[    0.107991] NetLabel:  domain hash size = 128
[    0.107992] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.108026] NetLabel:  unlabeled traffic allowed by default
[    0.108200] hpet clockevent registered
[    0.108205] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.108212] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.108218] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.112087] Switching to clocksource hpet
[    0.115941] Switched to NOHz mode on CPU #0
[    0.120811] AppArmor: AppArmor Filesystem Enabled
[    0.120853] pnp: PnP ACPI init
[    0.120880] ACPI: bus type pnp registered
[    0.121821] pnp 00:00: [bus 00-ff]
[    0.121826] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.121830] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.121833] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.121836] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.121840] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.121843] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.121846] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.121850] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.121853] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.121856] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.121860] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.121863] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.121866] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.121869] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.121873] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.121876] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.121880] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[    0.121883] pnp 00:00: [io  0x0d00-0xfdff window]
[    0.121886] pnp 00:00: [mem 0x00000000 window]
[    0.121964] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.122102] pnp 00:01: [io  0x0010-0x001f]
[    0.122106] pnp 00:01: [io  0x0024-0x0025]
[    0.122109] pnp 00:01: [io  0x0028-0x0029]
[    0.122112] pnp 00:01: [io  0x002c-0x002d]
[    0.122114] pnp 00:01: [io  0x0030-0x0031]
[    0.122117] pnp 00:01: [io  0x0034-0x0035]
[    0.122120] pnp 00:01: [io  0x0038-0x0039]
[    0.122123] pnp 00:01: [io  0x003c-0x003d]
[    0.122125] pnp 00:01: [io  0x0072-0x0077]
[    0.122128] pnp 00:01: [io  0x0080]
[    0.122131] pnp 00:01: [io  0x0090-0x009f]
[    0.122133] pnp 00:01: [io  0x00a4-0x00a5]
[    0.122136] pnp 00:01: [io  0x00a8-0x00a9]
[    0.122139] pnp 00:01: [io  0x00ac-0x00ad]
[    0.122142] pnp 00:01: [io  0x00b0-0x00b5]
[    0.122144] pnp 00:01: [io  0x00b8-0x00b9]
[    0.122147] pnp 00:01: [io  0x00bc-0x00bd]
[    0.122150] pnp 00:01: [io  0x0290-0x0297]
[    0.122153] pnp 00:01: [io  0x0800-0x080f]
[    0.122156] pnp 00:01: [io  0x1000-0x107f]
[    0.122158] pnp 00:01: [io  0x1180-0x11bf]
[    0.122161] pnp 00:01: [io  0x002e-0x002f]
[    0.122164] pnp 00:01: [io  0x04d0-0x04d1]
[    0.122167] pnp 00:01: [io  0xfe00]
[    0.122170] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.122173] pnp 00:01: [mem 0xfed13000-0xfed13fff]
[    0.122176] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.122179] pnp 00:01: [mem 0xfed20000-0xfed8ffff]
[    0.122181] pnp 00:01: [mem 0xfef00000-0xfeffffff]
[    0.122184] pnp 00:01: [mem 0xfed18000-0xfed1ffff]
[    0.122304] system 00:01: [io  0x0290-0x0297] has been reserved
[    0.122310] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.122315] system 00:01: [io  0x1000-0x107f] has been reserved
[    0.122319] system 00:01: [io  0x1180-0x11bf] has been reserved
[    0.122323] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.122326] system 00:01: [io  0xfe00] has been reserved
[    0.122331] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.122335] system 00:01: [mem 0xfed13000-0xfed13fff] has been reserved
[    0.122339] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.122343] system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.122346] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.122350] system 00:01: [mem 0xfed18000-0xfed1ffff] has been reserved
[    0.122356] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.122377] pnp 00:02: [io  0x0000-0x000f]
[    0.122381] pnp 00:02: [io  0x0081-0x008f]
[    0.122384] pnp 00:02: [io  0x00c0-0x00df]
[    0.122387] pnp 00:02: [dma 4]
[    0.122429] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.122453] pnp 00:03: [io  0x00f0-0x00fe]
[    0.122467] pnp 00:03: [irq 13]
[    0.122509] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.122546] pnp 00:04: [io  0x0070-0x0071]
[    0.122555] pnp 00:04: [irq 8]
[    0.122596] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.122613] pnp 00:05: [io  0x0061]
[    0.122651] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.122670] pnp 00:06: [io  0x0060]
[    0.122673] pnp 00:06: [io  0x0064]
[    0.122680] pnp 00:06: [irq 1]
[    0.122727] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.122748] pnp 00:07: [irq 12]
[    0.122793] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.123005] pnp 00:08: [mem 0xff800000-0xffffffff]
[    0.123064] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[    0.123520] pnp 00:09: [io  0x03f8-0x03ff]
[    0.123531] pnp 00:09: [irq 4]
[    0.123644] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.124259] pnp 00:0a: [io  0x0378-0x037f]
[    0.124271] pnp 00:0a: [irq 7]
[    0.124478] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.124566] pnp: PnP ACPI: found 11 devices
[    0.124570] ACPI: ACPI bus type pnp unregistered
[    0.124576] PnPBIOS: Disabled by ACPI PNP
[    0.161619] PCI: max bus depth: 1 pci_try_num: 2
[    0.161682] pci 0000:00:1c.5: BAR 14: assigned [mem 0x80000000-0x801fffff]
[    0.161689] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.161694] pci 0000:00:1c.5: BAR 13: assigned [io  0x2000-0x2fff]
[    0.161700] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.161704] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.161707] pci 0000:00:01.0:   bridge window [io  disabled]
[    0.161713] pci 0000:00:01.0:   bridge window [mem 0xd9100000-0xd93fffff]
[    0.161717] pci 0000:00:01.0:   bridge window [mem pref disabled]
[    0.161726] pci 0000:02:00.0: BAR 6: assigned [mem 0xd9080000-0xd90fffff pref]
[    0.161730] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.161734] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.161741] pci 0000:00:1c.0:   bridge window [mem 0xd8000000-0xd90fffff]
[    0.161747] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.161755] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[    0.161759] pci 0000:00:1c.4:   bridge window [io  0x5000-0x5fff]
[    0.161766] pci 0000:00:1c.4:   bridge window [mem 0xd9500000-0xd95fffff]
[    0.161771] pci 0000:00:1c.4:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.161779] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[    0.161783] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.161790] pci 0000:00:1c.5:   bridge window [mem 0x80000000-0x801fffff]
[    0.161795] pci 0000:00:1c.5:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.161804] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[    0.161808] pci 0000:00:1e.0:   bridge window [io  0x6000-0x6fff]
[    0.161814] pci 0000:00:1e.0:   bridge window [mem 0xd9400000-0xd94fffff]
[    0.161820] pci 0000:00:1e.0:   bridge window [mem 0xd4000000-0xd7ffffff 64bit pref]
[    0.161851] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.161857] pci 0000:00:01.0: setting latency timer to 64
[    0.161872] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.161878] pci 0000:00:1c.0: setting latency timer to 64
[    0.161888] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.161894] pci 0000:00:1c.4: setting latency timer to 64
[    0.161901] pci 0000:00:1c.5: enabling device (0140 -> 0143)
[    0.161906] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.161913] pci 0000:00:1c.5: setting latency timer to 64
[    0.161922] pci 0000:00:1e.0: setting latency timer to 64
[    0.161927] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.161931] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    0.161934] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
[    0.161937] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.161940] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.161943] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[    0.161946] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff]
[    0.161950] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff]
[    0.161953] pci_bus 0000:00: resource 12 [io  0x0d00-0xfdff]
[    0.161956] pci_bus 0000:01: resource 1 [mem 0xd9100000-0xd93fffff]
[    0.161960] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.161963] pci_bus 0000:02: resource 1 [mem 0xd8000000-0xd90fffff]
[    0.161966] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.161970] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.161973] pci_bus 0000:03: resource 1 [mem 0xd9500000-0xd95fffff]
[    0.161976] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.161980] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    0.161983] pci_bus 0000:04: resource 1 [mem 0x80000000-0x801fffff]
[    0.161987] pci_bus 0000:04: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.161990] pci_bus 0000:0a: resource 0 [io  0x6000-0x6fff]
[    0.161993] pci_bus 0000:0a: resource 1 [mem 0xd9400000-0xd94fffff]
[    0.161997] pci_bus 0000:0a: resource 2 [mem 0xd4000000-0xd7ffffff 64bit pref]
[    0.162000] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
[    0.162003] pci_bus 0000:0a: resource 5 [mem 0x000a0000-0x000bffff]
[    0.162006] pci_bus 0000:0a: resource 6 [mem 0x000d0000-0x000d3fff]
[    0.162009] pci_bus 0000:0a: resource 7 [mem 0x000d4000-0x000d7fff]
[    0.162013] pci_bus 0000:0a: resource 8 [mem 0x000d8000-0x000dbfff]
[    0.162016] pci_bus 0000:0a: resource 9 [mem 0x000dc000-0x000dffff]
[    0.162019] pci_bus 0000:0a: resource 10 [mem 0x000e0000-0x000e3fff]
[    0.162022] pci_bus 0000:0a: resource 11 [mem 0x80000000-0xdfffffff]
[    0.162025] pci_bus 0000:0a: resource 12 [io  0x0d00-0xfdff]
[    0.162078] NET: Registered protocol family 2
[    0.162156] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.162474] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.163117] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.163455] TCP: Hash tables configured (established 131072 bind 65536)
[    0.163459] TCP reno registered
[    0.163468] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.163483] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.163622] NET: Registered protocol family 1
[    0.163787] pci 0000:02:00.0: Boot video device
[    0.163818] PCI: CLS 32 bytes, default 64
[    0.163895] Simple Boot Flag at 0x36 set to 0x1
[    0.164289] audit: initializing netlink socket (disabled)
[    0.164304] type=2000 audit(1323336835.160:1): initialized
[    0.189439] Trying to unpack rootfs image as initramfs...
[    0.228307] highmem bounce pool size: 64 pages
[    0.228317] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.252262] VFS: Disk quotas dquot_6.5.2
[    0.252364] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.253414] fuse init (API version 7.16)
[    0.253593] msgmni has been set to 1680
[    0.264290] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.268406] io scheduler noop registered
[    0.268411] io scheduler deadline registered
[    0.268465] io scheduler cfq registered (default)
[    0.268642] pcieport 0000:00:01.0: setting latency timer to 64
[    0.268693] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.268767] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.268817] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.268900] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.268948] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.269028] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.269077] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.269188] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.269228] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.269439] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input0
[    0.269449] ACPI: Power Button [PWRB]
[    0.269515] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.269521] ACPI: Power Button [PWRF]
[    0.269558] ACPI: acpi_idle registered with cpuidle
[    0.269764] Marking TSC unstable due to TSC halts in idle
[    0.271294] ERST: Table is not found!
[    0.271477] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.291953] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.292025] isapnp: Scanning for PnP cards...
[    0.382307] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.448670] Linux agpgart interface v0.103
[    0.450441] brd: module loaded
[    0.451289] loop: module loaded
[    0.451516] ata_piix 0000:00:1f.1: version 2.13
[    0.451551] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.451609] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.456058] scsi0 : ata_piix
[    0.456253] scsi1 : ata_piix
[    0.457141] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30a0 irq 14
[    0.457145] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30a8 irq 15
[    0.457246] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.457255] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.615815] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.632555] ata1.00: ATAPI: MATSHITADVD-RAM LF-M721, APM1, max UDMA/33
[    0.632751] ata1.01: ATA-7: Maxtor 4R080L0, RAMB1TU0, max UDMA/133
[    0.632757] ata1.01: 160086528 sectors, multi 16: LBA 
[    0.633143] scsi2 : ata_piix
[    0.633243] scsi3 : ata_piix
[    0.634169] ata3: SATA max UDMA/133 cmd 0x30e8 ctl 0x30dc bmdma 0x30b0 irq 19
[    0.634174] ata4: SATA max UDMA/133 cmd 0x30e0 ctl 0x30d8 bmdma 0x30b8 irq 19
[    0.634748] Fixed MDIO Bus: probed
[    0.634790] PPP generic driver version 2.4.2
[    0.634884] tun: Universal TUN/TAP device driver, 1.6
[    0.634888] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    0.635036] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.635084] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.635110] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.635115] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.635185] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.635213] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.635227] ehci_hcd 0000:00:1d.7: debug port 1
[    0.639117] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.644363] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd9800000
[    0.648525] ata1.00: configured for UDMA/33
[    0.664283] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.664549] hub 1-0:1.0: USB hub found
[    0.664558] hub 1-0:1.0: 8 ports detected
[    0.664676] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.664699] uhci_hcd: USB Universal Host Controller Interface driver
[    0.664760] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.664772] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.664777] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.664870] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.664909] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003000
[    0.665108] hub 2-0:1.0: USB hub found
[    0.665116] hub 2-0:1.0: 2 ports detected
[    0.665213] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.665223] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.665228] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.665308] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.665342] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020
[    0.665533] hub 3-0:1.0: USB hub found
[    0.665540] hub 3-0:1.0: 2 ports detected
[    0.665627] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.665637] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.665642] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.665720] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.665768] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[    0.665965] hub 4-0:1.0: USB hub found
[    0.665973] hub 4-0:1.0: 2 ports detected
[    0.666062] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.666072] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.666077] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.666162] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.666212] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003060
[    0.666408] hub 5-0:1.0: USB hub found
[    0.666416] hub 5-0:1.0: 2 ports detected
[    0.666571] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    0.667254] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.667264] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.667335] ata1.01: configured for UDMA/100
[    0.667581] mousedev: PS/2 mouse device common for all mice
[    0.672558] rtc_cmos 00:04: RTC can wake from S4
[    0.672695] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.672729] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.672899] device-mapper: uevent: version 1.0.3
[    0.673042] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[    0.673099] EISA: Probing bus 0 at eisa.0
[    0.673103] EISA: Cannot allocate resource for mainboard
[    0.673106] Cannot allocate resource for EISA slot 1
[    0.673109] Cannot allocate resource for EISA slot 2
[    0.673111] Cannot allocate resource for EISA slot 3
[    0.673113] Cannot allocate resource for EISA slot 4
[    0.673116] Cannot allocate resource for EISA slot 5
[    0.673118] Cannot allocate resource for EISA slot 6
[    0.673121] Cannot allocate resource for EISA slot 7
[    0.673123] Cannot allocate resource for EISA slot 8
[    0.673125] EISA: Detected 0 cards.
[    0.673138] cpufreq-nforce2: No nForce2 chipset.
[    0.673189] cpuidle: using governor ladder
[    0.673256] cpuidle: using governor menu
[    0.673259] EFI Variables Facility v0.08 2004-May-17
[    0.673621] TCP cubic registered
[    0.673836] NET: Registered protocol family 10
[    0.674592] NET: Registered protocol family 17
[    0.674629] Registering the dns_resolver key type
[    0.674664] Using IPI No-Shortcut mode
[    0.674825] PM: Hibernation image not present or could not be loaded.
[    0.674842] registered taskstats version 1
[    0.832218] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.832890] ata3.01: ATA-7: ST3400832AS, 3.03, max UDMA/133
[    0.832895] ata3.01: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.884322] ata3.01: configured for UDMA/133
[    0.884363] ata4.00: HPA detected: current 156250080, native 156301488
[    0.884370] ata4.00: ATA-7: ST380815AS, 4.AAA, max UDMA/133
[    0.884374] ata4.00: 156250080 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.928008] isapnp: No Plug & Play device found
[    0.928028] ata4.01: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
[    0.928033] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.930508] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-RAM LF-M721  APM1 PQ: 0 ANSI: 5
[    0.933108] sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.933115] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.933300] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.933421] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.934294] scsi 0:0:1:0: Direct-Access     ATA      Maxtor 4R080L0   RAMB PQ: 0 ANSI: 5
[    0.934552] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    0.934788] scsi 2:0:1:0: Direct-Access     ATA      ST3400832AS      3.03 PQ: 0 ANSI: 5
[    0.935005] sd 2:0:1:0: Attached scsi generic sg2 type 0
[    0.935144] sd 2:0:1:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[    0.935236] sd 2:0:1:0: [sdb] Write Protect is off
[    0.935241] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    0.935279] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.935459] sd 0:0:1:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[    0.935553] sd 0:0:1:0: [sda] Write Protect is off
[    0.935557] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    0.935656] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.956914]  sdb: sdb1
[    0.957324] sd 2:0:1:0: [sdb] Attached SCSI disk
[    0.970396]  sda: sda1 sda2 < sda5 >
[    0.970932] sd 0:0:1:0: [sda] Attached SCSI disk
[    1.006844] ata4.00: configured for UDMA/133
[    1.020781] ata4.01: configured for UDMA/133
[    1.020960] scsi 3:0:0:0: Direct-Access     ATA      ST380815AS       4.AA PQ: 0 ANSI: 5
[    1.021199] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    1.021387] sd 3:0:0:0: [sdc] 156250080 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.021483] sd 3:0:0:0: [sdc] Write Protect is off
[    1.021489] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.021529] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.044069] usb 1-2: new high speed USB device number 2 using ehci_hcd
[    1.054708] scsi 3:0:1:0: Direct-Access     ATA      Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
[    1.054978] sd 3:0:1:0: Attached scsi generic sg4 type 0
[    1.077169]  sdc: sdc1 sdc2 < sdc5 >
[    1.077313] sdc: p5 size 4188160 extends beyond EOD, enabling native capacity
[    1.077386] ata4: soft resetting link
[    1.080183] Freeing initrd memory: 13312k freed
[    1.102328]   Magic number: 7:619:575
[    1.102441] rtc_cmos 00:04: setting system clock to 2011-12-08 09:33:56 UTC (1323336836)
[    1.102467] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.102470] EDD information not available.
[    1.177839] hub 1-2:1.0: USB hub found
[    1.178157] hub 1-2:1.0: 4 ports detected
[    1.444162] ata4.00: n_sectors mismatch 156250080 != 156301488
[    1.444166] ata4.00: new n_sectors matches native, probably late HPA unlock, n_sectors updated
[    1.448289] usb 1-2.1: new low speed USB device number 3 using ehci_hcd
[    1.489560] ata4.00: configured for UDMA/133
[    1.504332] ata4.01: configured for UDMA/133
[    1.504340] ata4: EH complete
[    1.504427] sd 3:0:1:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.504528] sd 3:0:1:0: [sdd] Write Protect is off
[    1.504534] sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[    1.504573] sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.533056] sd 3:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.533191] sdc: detected capacity change from 80000040960 to 80026361856
[    1.533329] sd 3:0:0:0: [sdc] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    1.533431]  sdd: sdd1
[    1.576994]  sdc: sdc1 sdc2 < sdc5 >
[    1.577530] sdd: detected capacity change from 0 to 500107862016
[    1.577723] sdc: detected capacity change from 0 to 80026361856
[    1.577936] sd 3:0:1:0: [sdd] Attached SCSI disk
[    1.578026] sdd: detected capacity change from 0 to 500107862016
[    1.578165] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.578209] Freeing unused kernel memory: 696k freed
[    1.578719] Write protecting the kernel text: 5332k
[    1.578757] Write protecting the kernel read-only data: 2192k
[    1.614567] udevd[86]: starting version 173
[    1.616438] usb 1-2.4: new high speed USB device number 4 using ehci_hcd
[    1.927808] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[    1.927814] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[    1.927850] e1000e 0000:03:00.0: Disabling ASPM L0s L1
[    1.927909] e1000e 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.939855] e1000e 0000:03:00.0: setting latency timer to 64
[    1.942494] e1000e 0000:03:00.0: irq 44 for MSI/MSI-X
[    2.052775] e1000e 0000:03:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1a:4d:45:e1:98
[    2.052781] e1000e 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection
[    2.052854] e1000e 0000:03:00.0: eth0: MAC: 2, PHY: 2, PBA No: FFFFFF-0FF
[    2.083714] input: ELECOM ELECOM USB mouse with wheel as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.1/1-2.1:1.0/input/input3
[    2.083918] generic-usb 0003:056E:0035.0001: input,hidraw0: USB HID v1.11 Mouse [ELECOM ELECOM USB mouse with wheel] on usb-0000:00:1d.7-2.1/input0
[    2.083948] usbcore: registered new interface driver usbhid
[    2.083951] usbhid: USB HID core driver
[    2.435548] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[    5.245055] udevd[298]: starting version 173
[    5.302151] lp: driver loaded but no devices found
[    5.325797] Adding 2094076k swap on /dev/sdc5.  Priority:-1 extents:1 across:2094076k 
[    5.476690] EDAC MC: Ver: 2.1.0
[    5.491058] EDAC MC0: Giving out device to 'i3000_edac' 'i3000': DEV 0000:00:00.0
[    5.495291] EDAC PCI0: Giving out device to module 'i3000_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[    5.819156] type=1400 audit(1323336841.213:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=389 comm="apparmor_parser"
[    5.819749] type=1400 audit(1323336841.213:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=389 comm="apparmor_parser"
[    5.820140] type=1400 audit(1323336841.217:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=389 comm="apparmor_parser"
[    5.825980] parport_pc 00:0a: reported by Plug and Play ACPI
[    5.826032] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    5.838583] xgifb: module is from the staging directory, the quality is unknown, you have been warned.
[    5.920403] intel_rng: FWH not detected
[    5.920496] lp0: using parport0 (interrupt-driven).
[    5.924382] 
[    5.924386] XGIfb_init_module
[    5.924389] XGIfb: Mode 'none' not supported anymore. Using default.
[    5.924395] XGIfb: Options (null)
[    5.924433] XGIfb: Relocate IO address: 6080 [00000000]
[    5.924444] xgifb 0000:0a:03.0: enabling device (0000 -> 0003)
[    5.924459] XGIfb:chipid = 31
[    5.924465] xgifb 0000:0a:03.0: BAR 6: can't assign [??? 0x00000000 flags 0x0] (bogus alignment)
[    5.924467] XGIfb: Video ROM not found
[    5.924472] XGIfb: SR14=0 DramSzie 100000 ChannelNum 1
[    5.924779] XGIfb: Framebuffer at 0xd4000000, mapped to 0xf8d80000, size 1024k
[    5.924783] XGIfb: MMIO at 0xd9400000, mapped to 0xf8f00000, size 256k
[    5.924785] XGIfb: XGIInitNew() ...12345
[    5.924800] BUG: unable to handle kernel NULL pointer dereference at 00000065
[    5.924806] IP: [<f8d08400>] ReadVBIOSTablData+0x21/0x397 [xgifb]
[    5.924821] *pde = 00000000 
[    5.924824] Oops: 0000 [#1] SMP 
[    5.924829] Modules linked in: intel_rng(+) xgifb(C+) snd_timer parport_pc snd_seq_device snd soundcore snd_page_alloc i3000_edac edac_core lp parport usbhid hid e1000e
[    5.924846] 
[    5.924850] Pid: 416, comm: modprobe Tainted: G         C  3.0.0-13-generic #22-Ubuntu NEC               Express5800/110Gd [N8100-1279Y]                       /5MMSV-RH         
[    5.924858] EIP: 0060:[<f8d08400>] EFLAGS: 00010246 CPU: 0
[    5.924867] EIP is at ReadVBIOSTablData+0x21/0x397 [xgifb]
[    5.924871] EAX: 00000031 EBX: f8d146e0 ECX: 00000000 EDX: f6f8fbdc
[    5.924874] ESI: fffffffb EDI: f8d14700 EBP: f6f8fbcc ESP: f6f8fbbc
[    5.924877]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[    5.924880] Process modprobe (pid: 416, ti=f6f8e000 task=f385f2c0 task.ti=f6f8e000)
[    5.924883] Stack:
[    5.924885]  00000000 f8d146e0 fffffffb f8d14700 f6f8fde4 f8cfa434 f8d0d383 c16f3043
[    5.924893]  00000000 000060c4 000060d4 000060c0 000060ce 000060c2 ffffffff 000060ca
[    5.924901]  000060c6 000060c7 000060c8 000060c9 000060da 00006080 00006084 00006090
[    5.924908] Call Trace:
[    5.924919]  [<f8cfa434>] XGIInitNew+0x194/0x9d0 [xgifb]
[    5.924928]  [<c12846a5>] ? put_dec+0x85/0x90
[    5.924934]  [<c1286a38>] ? vsnprintf+0x2c8/0x390
[    5.924942]  [<c151902f>] ? printk+0x2d/0x2f
[    5.924951]  [<f8d0afd1>] xgifb_probe.part.9+0x4d8/0xcad [xgifb]
[    5.924961]  [<f8d0b7f6>] xgifb_probe+0x50/0x58 [xgifb]
[    5.924967]  [<c129fda7>] local_pci_probe+0x47/0xb0
[    5.924972]  [<c12a11d8>] pci_device_probe+0x68/0x90
[    5.924978]  [<c1187617>] ? sysfs_create_link+0x17/0x20
[    5.924985]  [<c1345efd>] really_probe+0x4d/0x150
[    5.924990]  [<c134e369>] ? pm_runtime_barrier+0x49/0xb0
[    5.924997]  [<c134613a>] driver_probe_device+0x3a/0x60
[    5.925001]  [<c13461f1>] __driver_attach+0x91/0xa0
[    5.925006]  [<c1346160>] ? driver_probe_device+0x60/0x60
[    5.925011]  [<c1345279>] bus_for_each_dev+0x49/0x70
[    5.925015]  [<c1345d31>] driver_attach+0x21/0x30
[    5.925019]  [<c1346160>] ? driver_probe_device+0x60/0x60
[    5.925024]  [<c1345a0f>] bus_add_driver+0x17f/0x260
[    5.925029]  [<c12a1200>] ? pci_device_probe+0x90/0x90
[    5.925033]  [<c13466c6>] driver_register+0x66/0x110
[    5.925040]  [<c12a0f83>] __pci_register_driver+0x43/0xc0
[    5.925048]  [<f80743bf>] xgifb_init_module+0x6a/0xcab [xgifb]
[    5.925055]  [<c1001125>] do_one_initcall+0x35/0x170
[    5.925063]  [<f8074355>] ? XGIfb_setup+0x355/0x355 [xgifb]
[    5.925069]  [<c10829fd>] sys_init_module+0xad/0x210
[    5.925074]  [<c152cc24>] syscall_call+0x7/0xb
[    5.925076] Code: b8 01 00 00 00 5b 5e 5f 5d c3 55 89 e5 57 56 53 51 3e 8d 74 26 00 8b 8a a0 00 00 00 83 f8 31 0f 85 76 03 00 00 66 c7 42 6c 00 00 <8a> 41 65 a8 01 0f 84 65 03 00 00 66 c7 42 6c 01 00 8a 81 16 03 
[    5.925119] EIP: [<f8d08400>] ReadVBIOSTablData+0x21/0x397 [xgifb] SS:ESP 0068:f6f8fbbc
[    5.925131] CR2: 0000000000000065
[    5.925135] ---[ end trace f00ac203f22dde52 ]---
[    5.929636] leds_ss4200: no LED devices found
[    6.020507] nvidia: module license 'NVIDIA' taints kernel.
[    6.193555] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[    8.016506] HDA Intel 0000:02:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.016513] hda_intel: Disabling MSI
[    8.016551] HDA Intel 0000:02:00.1: setting latency timer to 64
[    8.045254] cfg80211: Calling CRDA to update world regulatory domain
[    8.637978] ppdev: user-space parallel port driver
[    9.156193] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    9.156201] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    9.156205] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    9.156208] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    9.156212] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    9.156215] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    9.156219] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    9.156222] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    9.156226] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    9.156229] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    9.156232] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    9.156236] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    9.156239] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    9.156243] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    9.156246] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    9.156250] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    9.156253] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    9.156257] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    9.156260] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    9.156264] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    9.156267] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    9.156270] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (600 mBi, 2000 mBm)
[    9.156274] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[    9.156277] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (600 mBi, 2000 mBm)
[    9.156281] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[    9.156284] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (600 mBi, 2000 mBm)
[    9.156288] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[    9.156291] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (600 mBi, 2000 mBm)
[    9.180026] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[    9.203869] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    9.204827] Registered led device: rt73usb-phy0::radio
[    9.204859] Registered led device: rt73usb-phy0::assoc
[    9.204887] Registered led device: rt73usb-phy0::quality
[    9.206159] usbcore: registered new interface driver rt73usb
[    9.218317] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[    9.248035] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[    9.284043] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[    9.300362] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card0/input4
[    9.300826] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card0/input5
[    9.301289] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card0/input6
[    9.301731] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.0/0000:02:00.1/sound/card0/input7
[    9.304380] nvidia 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.304395] nvidia 0000:02:00.0: setting latency timer to 64
[    9.304403] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    9.304407] vgaarb: transferring owner from PCI:0000:02:00.0 to PCI:0000:0a:03.0
[    9.304764] NVRM: loading NVIDIA UNIX x86 Kernel Module  280.13  Wed Jul 27 16:55:43 PDT 2011
[    9.417334] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    9.417342] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    9.417346] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    9.417350] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    9.417353] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    9.417357] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    9.417360] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    9.417364] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    9.417367] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    9.417371] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    9.417374] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    9.417378] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    9.417381] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    9.417385] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    9.417388] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    9.417391] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    9.417395] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    9.417398] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    9.417402] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    9.417405] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    9.417409] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    9.417412] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
[    9.417415] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[    9.417419] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[    9.417422] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[    9.417426] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
[    9.417429] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[    9.417433] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
[    9.417438] cfg80211: World regulatory domain updated:
[    9.417440] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    9.417444] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.417447] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.417451] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    9.417454] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    9.417458] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.510673] init: failsafe main process (696) killed by TERM signal
[   12.590037] type=1400 audit(1323336847.985:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=874 comm="apparmor_parser"
[   12.594846] type=1400 audit(1323336847.989:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=875 comm="apparmor_parser"
[   12.601460] type=1400 audit(1323336847.997:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=875 comm="apparmor_parser"
[   12.601823] type=1400 audit(1323336847.997:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=875 comm="apparmor_parser"
[   12.642229] type=1400 audit(1323336848.037:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=876 comm="apparmor_parser"
[   12.649658] type=1400 audit(1323336848.045:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=876 comm="apparmor_parser"
[   12.660609] type=1400 audit(1323336848.057:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=876 comm="apparmor_parser"
[   12.672339] e1000e 0000:03:00.0: irq 44 for MSI/MSI-X
[   12.686577] type=1400 audit(1323336848.081:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=878 comm="apparmor_parser"
[   12.687581] type=1400 audit(1323336848.081:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=878 comm="apparmor_parser"
[   12.700153] type=1400 audit(1323336848.097:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=879 comm="apparmor_parser"
[   12.728136] e1000e 0000:03:00.0: irq 44 for MSI/MSI-X
[   12.728701] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.865344] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.396837] init: apport pre-start process (918) terminated with status 1
[   13.406766] init: apport post-stop process (938) terminated with status 1

　　　　　以上よろしくお願いいたします。

最後の編集者: Mocchi (2011-12-09 09:51:56)

オフライン

 

#10 2011-12-10 15:04:02

Mocchi
管理者
登録日: 2009-05-17

Re: 11.10でBLASTER５.１VXの《音》を出したい。

以下を試してみていただけますか？

1. $ sudo gedit /etc/modprobe.d/snd-ca0106.conf;
2. テキストエディタが開くので「options snd-ca0106 subsystem=0x10041102」を記述
3. 保存して下さい
4. 再起動して下さい
5. 音声が出るかどうか確認

音声が出ない場合は以下と、このスレッドの#7の3つの内容を教えて下さい。
1. コマンド「$ cat /proc/asound/cards;」
2. コマンド「$ aplay -L;」
3. コマンド「$ aplay -l;」

よろしくお願いします。

オフライン

 

#11 2011-12-10 16:24:08

M/kato
メンバ
登録日: 2008-03-30

Re: 11.10でBLASTER５.１VXの《音》を出したい。

Mocchiさん　誠に有難うございます。
options snd-ca0106 subsystem=0x10041102では、以前と変わらず
音は出ませんでした。　
1. コマンド「$ cat /proc/asound/cards;」の内容は、


コード:

 0 [NVidia         ]: HDA-Intel - HDA NVidia

                      HDA NVidia at 0xd9000000 irq 16

と以前と変わらないものでした。
2. コマンド「$ aplay -L;は

コード:

default

    Playback/recording through the PulseAudio sound server

pulse

    Playback/recording through the PulseAudio sound server

hdmi:CARD=NVidia,DEV=0

    HDA NVidia, HDMI 0

    HDMI Audio Output

hdmi:CARD=NVidia,DEV=1

    HDA NVidia, HDMI 0

    HDMI Audio Output

hdmi:CARD=NVidia,DEV=2

    HDA NVidia, HDMI 0

    HDMI Audio Output

hdmi:CARD=NVidia,DEV=3

    HDA NVidia, HDMI 0

    HDMI Audio Output

dmix:CARD=NVidia,DEV=3

    HDA NVidia, HDMI 0

    Direct sample mixing device

dmix:CARD=NVidia,DEV=7

    HDA NVidia, HDMI 0

    Direct sample mixing device

dmix:CARD=NVidia,DEV=8

    HDA NVidia, HDMI 0

    Direct sample mixing device

dmix:CARD=NVidia,DEV=9

    HDA NVidia, HDMI 0

    Direct sample mixing device

dsnoop:CARD=NVidia,DEV=3

    HDA NVidia, HDMI 0

    Direct sample snooping device

dsnoop:CARD=NVidia,DEV=7

    HDA NVidia, HDMI 0

    Direct sample snooping device

dsnoop:CARD=NVidia,DEV=8

    HDA NVidia, HDMI 0

    Direct sample snooping device

dsnoop:CARD=NVidia,DEV=9

    HDA NVidia, HDMI 0

    Direct sample snooping device

hw:CARD=NVidia,DEV=3

    HDA NVidia, HDMI 0

    Direct hardware device without any conversions

hw:CARD=NVidia,DEV=7

    HDA NVidia, HDMI 0

    Direct hardware device without any conversions

hw:CARD=NVidia,DEV=8

    HDA NVidia, HDMI 0

    Direct hardware device without any conversions

hw:CARD=NVidia,DEV=9

    HDA NVidia, HDMI 0

    Direct hardware device without any conversions

plughw:CARD=NVidia,DEV=3

    HDA NVidia, HDMI 0

    Hardware device with all software conversions

plughw:CARD=NVidia,DEV=7

    HDA NVidia, HDMI 0

    Hardware device with all software conversions

plughw:CARD=NVidia,DEV=8

    HDA NVidia, HDMI 0

    Hardware device with all software conversions

plughw:CARD=NVidia,DEV=9

    HDA NVidia, HDMI 0

    Hardware device with all software conversions

となってます。　3. コマンド「$ aplay -l;は、

コード:

**** ハードウェアデバイス PLAYBACK のリスト ****

カード 0: NVidia [HDA NVidia], デバイス 3: HDMI 0 [HDMI 0]

  サブデバイス: 1/1

  サブデバイス #0: subdevice #0

カード 0: NVidia [HDA NVidia], デバイス 7: HDMI 0 [HDMI 0]

  サブデバイス: 1/1

  サブデバイス #0: subdevice #0

カード 0: NVidia [HDA NVidia], デバイス 8: HDMI 0 [HDMI 0]

  サブデバイス: 1/1

  サブデバイス #0: subdevice #0

カード 0: NVidia [HDA NVidia], デバイス 9: HDMI 0 [HDMI 0]

  サブデバイス: 1/1

  サブデバイス #0: subdevice #0

です。　　宜しくお願い致します。

最後の編集者: Mocchi (2011-12-10 18:00:56)

オフライン

 

#12 2011-12-10 19:15:50

Mocchi
管理者
登録日: 2009-05-17

Re: 11.10でBLASTER５.１VXの《音》を出したい。

了解しました。追加で、このスレッドの#7の3つの内容も教えて下さい。

オフライン

 

#13 2011-12-10 21:08:00

M/kato
メンバ
登録日: 2008-03-30

Re: 11.10でBLASTER５.１VXの《音》を出したい。

Mocchiさん　誠に迅速なるご回答を戴き恐縮でございます。
#7の3つの内容ですが・・・既に＃８にて送って下ります。
/var/log/dmesgが非常に大きい為、＃８と＃９の二つが其れ
です。是で何か出来るのなら是非とも宜しくお教え下さいませ。
　　　　一日千秋にて待っております。

オフライン

 

#14 2011-12-10 22:00:00

Mocchi
管理者
登録日: 2009-05-17

Re: 11.10でBLASTER５.１VXの《音》を出したい。

M/Kato による投稿:

#7の3つの内容ですが・・・既に＃８にて送って下ります。

サウンドドライバーとなるカーネルモジュールをオプション「subsystem=0x10041102」付きで有効化するように設定を変更したので、多少なりとも状態が変化するかなと思いましたが、その様子ではやはり変わらないようですね。。。

現状ではやはり諦めるほかないようです。

オフライン

 

#15 2011-12-10 22:28:35

M/kato
メンバ
登録日: 2008-03-30

Re: 11.10でBLASTER５.１VXの《音》を出したい。

Mocchiさん　ナント！迅速なご回答！！。　驚きいってオリマス！！！。

>現状ではやはり諦めるほかないようです。
そぅ～ナノですかぁ～！。　　大変残念です。　　この最初に記した様に
・・志向を使ってましたが「音」を出す事が出来ず、ユニットをCREATIVE　
Sound Blastrer 5.1VXに変更したのです。私の使ってる本体が、一寸
特殊？なのでしょうか？　（　本体　NEC　Express５８００／１１０Gd　)
是は数年前、ネットで非常な廉価（タッタの一万チョット！）で入手した為、
「年寄り《金無漏塵》」の貴重品として使ってるのですけど駄目なのですか！。
誠に残念！且つ「侘びしい」デスねぇ～。　音源ユニットの変更で「音」を出す
事も出来ないのでしょうか？。何か「音」を出せる方法は無いのでしょうか？。

　何方か《NEC　Express５８００／１１０Gd》で「音」を出せる方法をご存知
　　　　　　　　　でしたら是非とも宜しくお願い申し上げます。

オフライン

 

#16 2011-12-11 18:07:38

koisan1949
メンバ
From: Hyogo, Japan
登録日: 2007-11-11

Re: 11.10でBLASTER５.１VXの《音》を出したい。

もっとも簡単な対処は、中古市場でPCIbus 16bit版のsound blasterを入手することです。
chipがEMU10K1なら、まず問題なく稼働します。
http://en.wikipedia.org/wiki/Sound_Blaster_Live!
このボード類を何種類か持っていて、それらをP4 machineに挿していますが、
私の経験則から言って、全てUbuntuのバージョンに関係なく動作しています。
どこかに転がっていませんか。。。

オフライン

 

#17 2011-12-12 00:22:25

hmatsue
アドバイザ
登録日: 2009-03-10

Re: 11.10でBLASTER５.１VXの《音》を出したい。

なんとなく思っただけなのですけど、カーネルオプションに、noacpiとかacpi=noirqとか付けて起動してみても状況変わらないでしょうか。
# とりあえず試すだけ試してみて、サウンドカードが認識されればラッキーという程度の話です。。

オフライン

 

#18 2011-12-12 15:28:28

M/kato
メンバ
登録日: 2008-03-30

Re: 11.10でBLASTER５.１VXの《音》を出したい。

koisan1949さん　hmatsueさん　誠に有難うございます。
>どこかに転がっていませんか。。。
残念ながら何処にも転がっていませんでした。結構彼方此方のゴミ捨て場
を以前から探してますが・・・有料になってから難しくなりました。
>カーネルオプションに、noacpiとかacpi=noirqとか付けて・・・・
是、具体的に如何なる事なのでしょう？。当方、全くの素人でカーネルオプション
の開き方？記述方法等が解りませんので、お教え下さいませんでしょうか。
　　宜しくお願い申し上げます。

オフライン

 

#19 2011-12-13 12:59:54

hmatsue
アドバイザ
登録日: 2009-03-10

Re: 11.10でBLASTER５.１VXの《音》を出したい。

起動オプションの試す場合、
https://wiki.ubuntulinux.jp/UbuntuTips/Others/BootOptions
を参照してみて下さい。
# 本当にダメで元々ぐらいの気持ちで試してみて下さい。。

オフライン

 

#20 2011-12-18 16:47:37

koisan1949
メンバ
From: Hyogo, Japan
登録日: 2007-11-11

Re: 11.10でBLASTER５.１VXの《音》を出したい。

Onkyo製のボードも動作するようですが。。。　私は持ってないので、無責任ですが。。。
http://www.alsa-project.org/main/index. … ndor-Onkyo
中古市場でも、けっこう高額です。(○○mapさんでも売ってますね)

オフライン

 

#21 2011-12-18 17:02:18

koisan1949
メンバ
From: Hyogo, Japan
登録日: 2007-11-11

Re: 11.10でBLASTER５.１VXの《音》を出したい。

蛇足
ジャンク品と称し、ボード本体を放出している様ですね。。。
　(sound blaster CT4810, Live )

この音源ボードは頑丈で壊れる可能性はほとんど無く、
おそらく添付のCDがないのと、サポートが終了しているので
ホームページからdownloadできないため、鳴るか試行できないのだと思います。

オフライン

 

#22 2011-12-18 17:42:12

M/kato
メンバ
登録日: 2008-03-30

Re: 11.10でBLASTER５.１VXの《音》を出したい。

koisan1949さん  度々誠に有難うございます。
しかし、僕には貴方の仰る
>ジャンク品と称し、ボード本体を放出している様ですね。。。(sound blaster CT4810, Live )
の意味が良く解かりません。僕の持ってるのはCREATIVE　Sound Blastrer 5.1VX　です。
是が「sound blaster CT4810, Live」と同じ物なのでしょうか？。其れとも、此処に在るソフトを
Ｄ／ＬするとUbuntuでも音を出せる様に出来るのでしょうか？。
　　もぅ～少し詳しくお教え戴けませんでしょうか。　　　　　　　　　宜しくお願い致します。

オフライン

 

#23 2011-12-18 23:29:41

koisan1949
メンバ
From: Hyogo, Japan
登録日: 2007-11-11

Re: 11.10でBLASTER５.１VXの《音》を出したい。

Sound Blastrer 5.1VXは、音源chipsetにCA0106が使われています。
これは24bit仕様の特殊なカスタムchipです。

Not all features on all models supported. On the VX,
white noise on playback unless initialized in Windows first.
One quirky (but permanent) workaround is to enable the old oss modules,
specifically the 100% sound blaster compatible module (sb).
You don't have to load the oss modules.
The alsa module snd-ca0106 works fine somehow
if the old sb module is compiled in the kernel as a module (no white noise).

このボードの前身である旧製品の
Sound Blaster PCI 512, Sound Blaster Live, Sound Blaster Live Platinum,
Sound Blaster Live Value, Sound Blaster Live 5.1は、
16bit仕様のカスタムchip emu10k1が使用されています。
　(だから、これらはSound Blastrer 5.1VXとは別のものです。)
これらのsound blaster製品群は、使用されているchipが固定されています。
このemu10k1とかemu10k2なら、Ubuntu環境では経験上問題なく自動認識してくれます。

それに比較して、sound blaster Audigy製品群は、使われているchipが多種あり、
入手して載っているchipがなんであるか確認しないことには分らないです。
詳細な製品名が掲載されてないことが多いです。だから入手しても稼働するかは不明です。
なお当然に、Windows環境ならドライバーをdownloadすれば動作します。

alsa driverで稼働しているsound blasterの製品群の一覧
http://www.alsa-project.org/main/index. … ative_Labs

オフライン

 

#24 2011-12-22 14:10:13

M/kato
メンバ
登録日: 2008-03-30

Re: 11.10でBLASTER５.１VXの《音》を出したい。

koisan1949さん  色々とお教え戴き大変有難うございます。
仰るサイトを読み、印刷してみたのですが結局私には難し過ぎて判りません
でした。　其処で出来ることなら最後に一つダケお教え下さいませんか？。
私の使ってる「NEC　Express５８００／１１０Gd」で音を出せる音源ボード
は何がよいのでしょう。　　何処で探すと入手できるのですか？。

　ナントカして「音」を出してみたいのです。宜しくお願い致します。

オフライン

 

#25 2011-12-23 00:17:09

koisan1949
メンバ
From: Hyogo, Japan
登録日: 2007-11-11

Re: 11.10でBLASTER５.１VXの《音》を出したい。

中古品のオークションで探すか、中古品の通信販売している店を覗かれてはどうですか。。。

あくまで、販売店の一例ですが。。。他の店でも入手可能かと思います。
http://www.sofmap.com/product_list/exec … p;image=on

オフライン

 

 

ページ: 1 2

Board footer

Powered by FluxBB