お知らせ

  • 利用規約を守って投稿してください。また、よくある質問および投稿の手引きも参照してください。
  • メッセージの投稿にはアカウントが必要です。未登録の方は、ユーザ登録ページからアカウントを作成することができます。

#1 2011-08-15 00:03:52

gkt
新しいメンバ
登録日: 2011-08-14

画像がディスプレイ全体に表示されません

つい先ほどUbuntuをインストールしたLinux超初心者ですが
表示される画像がディスプレイ全体に表示されません。
多少縮小された感じで左上よりに表示されています。
うまく説明できなくてすみません。
------------------------------------
I-----------------------------I無無I
I ランチャ         I無無I 
I etc          I無無I 
I           I無無I 
I           I無無I     ←PCのモニタ全体
I           I無無I 
I           I無無I 
I----------------------------I無無I
I無無無無無無無無無無無無無I
I無無無無無無無無無無無無無I
I----------------------------------

見たいな感じです。
色々と調べて見ましたが
結局解決できませんでした。

なにか必要な情報があるのでしたら
わかる限り載せますので
回答お願い致します。

オフライン

 

#2 2011-08-15 00:22:22

hmatsue
アドバイザ
登録日: 2009-03-10

Re: 画像がディスプレイ全体に表示されません

まずは、
Ubuntuのバージョン、
PCのメーカ名、および、型式、
いわゆる自作機や、ショップブランドの場合はM/B型式、
グラフィックボードがオンボードでない場合は、グラフィックボードの型式、
ディスプレイが別体(非ノートPCや、一体型でない場合)は、ディスプレイ型式、
端末を開いて、xrandrを実行した際の出力、
を投稿下さい。

一応、確認ですが、仮想マシン(virtualbox, vmwareなど)ではないですよね?

オフライン

 

#3 2011-08-15 01:10:19

gkt
新しいメンバ
登録日: 2011-08-14

Re: 画像がディスプレイ全体に表示されません

>>hmatsueさん
閲覧、返事ありがとうございます。
言われたとおり調べました。

Ubuntuのバージョンは11.04
メーカー:SONY
型式:VGC-JS52JB

グラボは買った当初からついてるもので
オンボードのはずです
本体とディスプレイは一体型で
xrandrで調べた結果
Screen 0: minimum 320 x 200, current 1360 x 768, maximum 8192 x 8192
VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1024x768       60.0*
   800x600        60.3     56.2 
   848x480        60.0 
   640x480        59.9 
LVDS1 connected 1360x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1600x1200      60.0 +
   1600x1024      60.2 
   1400x1050      60.0 
   1280x1024      60.0 
   1440x900       59.9 
   1280x960       60.0 
   1360x768       59.8*    60.0 
   1152x864       60.0 
   1024x768       60.0 
   800x600        60.3     56.2 
   640x480        59.9 

となりました
なにか調べ間違いや、漏れがありましたら
もう一度調べ直しますので
もしあったらぜひご指摘ください。

オフライン

 

#4 2011-08-15 01:25:55

gkt
新しいメンバ
登録日: 2011-08-14

Re: 画像がディスプレイ全体に表示されません

あ、わすれてました。
仮想マシンではありません
CDからインストールしたものです

オフライン

 

#5 2011-08-15 02:45:37

gkt
新しいメンバ
登録日: 2011-08-14

Re: 画像がディスプレイ全体に表示されません

M/Bの型式の調べ方がわからなくて
PCの外側に貼ってるそれっぽいのを書きましたが
あってるのかわからなかったので
ソフトウェアを使って調べてみたところ
ソフトウェアがなかなか見つからなくて
中国のやつをひとつ見つけたのですが
どれがどれかよくわからないので
とりあえず
わかる限り書いておきます!

メーカー:SONY
主版型号:AMIBIOS(VAIO)
主版序列号:28289311-1010067
BIOS大小:4.00MB
芯片組:IntelCorporation Intel(R)4SeriesChipsetProcessortoI/OController-2E20
PC型号:VGC-JS52JB

でした
あと一応グラボは

名称:Intel(R) G45/G43 Express Chipset
大小:1342MB
内核名称:Intel(R) G45/G43 Express Chipset Family
でした。

オフライン

 

#6 2011-08-15 09:42:36

hmatsue
アドバイザ
登録日: 2009-03-10

Re: 画像がディスプレイ全体に表示されません

使用しているPCはこちらのようですね。
http://www.sony.jp/vaio/pre_include/html/JS3/spec_retail1.html

gkt による投稿:

xrandrで調べた結果
Screen 0: minimum 320 x 200, current 1360 x 768, maximum 8192 x 8192
VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1024x768       60.0*
   800x600        60.3     56.2 
   848x480        60.0 
   640x480        59.9 
LVDS1 connected 1360x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1600x1200      60.0 +
   1600x1024      60.2 
   1400x1050      60.0 
   1280x1024      60.0 
   1440x900       59.9 
   1280x960       60.0 
   1360x768       59.8*    60.0 
   1152x864       60.0 
   1024x768       60.0 
   800x600        60.3     56.2 
   640x480        59.9

Ubuntuのバージョンが11.04とのことなので、おそらくUnity環境になっているかと思います。
画面の左上のUbuntロゴをクリックしてダッシュの検索ダイアログから、displaysを検索して、ディスプレイ設定画面を起動して下さい。
そこで解像度変更ができるかと思います。現在、1360x768の設定になっているのではないかと思いますが、それより大きい解像度を選択すると画面サイズが大きくなるか確認してみて下さい。

ふたつほど、よく判らない点がありまして、

ひとつは、LVDS1とVGA1のふたつの端子がconnectedになっている点です。
現在ディスプレイやプロジェクタなど、追加で接続しているものはありますでしょうか。
ディスプレイ設定画面に表示されている出力先名はどちらになっていますでしょうか。

もうひとつは、モニタの最大解像度が1680x1050になっているのに、xrandrの認識情報では、1680x1050が存在していないことです。まずは、/var/logをファイルブラウザで開いて、Xorg.0.logの内容をコピペで全文投稿してみて下さい。
おそらく存在しないのではないかと思いますが、もし、/etc/X11/xorg.confが存在していれば、その内容も投稿願います。
何となくEDIDで正しいモードがとれていないような気がします。xrog.confに解像度設定直書きしてしまうのが手っ取り早い対処かもですね。
購入時のマニュアル等は手元にありますでしょうか。ディスプレイの性能、特に、垂直、水平同期周波数があれば投稿下さい。

オフライン

 

#7 2011-08-15 13:40:15

gkt
新しいメンバ
登録日: 2011-08-14

Re: 画像がディスプレイ全体に表示されません

>>hamtsueさん
お返事ありがとうございます。
解像度を調べて見たところ
1024x768になっていました。
とりあえず大きい奴に変更する方法を調べて
やって見たところ
無の部分を現象されて
ほぼ画面いっぱいに表示出きるようになりました。
どうやら解像度の問題だったようです。
でも確かに言われてみると
あるはずの解像度がないのは不思議なのでしらべておきました。
端子の方は、解像度変えるときに、調べて見た結果
LVDS1で変えても一時的なもので
LVDS1の設定をgdmのDefaultに書き加えて
PCを再起してみた結果
結局もとの解像度に戻ってしまいました。
そこでもしかしたらVGA1が優先されてるのではないか
(PCの解像度設定画面でも
 1024x768       60.0*
   800x600        60.3     56.2
   848x480        60.0
   640x480        59.9  の選択肢しかなかったから)
と思い、VGA1に試しに1600x1200を追加してみた結果、自PCのモニタの解像度設定にも
1600x1200の選択肢が出てきました。
ので、多分自PCにい接続されているディスプレイはVGA1の方だと思います。
もう一つの端子は、多分ですが、
父親も僕がxrandrで調べていたときにPCを使っていて
で、父PCと自PCはルーターでつながっていましたので
それが原因で端子が二つ出たのではないのかと思われます。

以下/var/log/Xorg.0.logのコピペです。

[    23.958]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[    23.958] X Protocol Version 11, Revision 0
[    23.958] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
[    23.958] Current Operating System: Linux NERV 2.6.38-10-generic-pae #46-Ubuntu SMP Tue Jun 28 16:54:49 UTC 2011 i686
[    23.958] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-10-generic-pae root=UUID=ccb15a00-962e-4917-8102-d44450e42c58 ro quiet splash vt.handoff=7
[    23.958] Build Date: 21 May 2011  11:38:35AM
[    23.958] xorg-server 2:1.10.1-1ubuntu1.1 (For technical support please see http://www.ubuntu.com/support)
[    23.958] Current version of pixman: 0.20.2
[    23.958]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    23.958] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.958] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 15 12:57:31 2011
[    23.958] (==) Using config file: "/etc/X11/xorg.conf"
[    23.958] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.958] (==) No Layout section.  Using the first Screen section.
[    23.958] (==) No screen section available. Using defaults.
[    23.958] (**) |-->Screen "Default Screen Section" (0)
[    23.958] (**) |   |-->Monitor "<default monitor>"
[    23.959] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    23.959] (==) Automatically adding devices
[    23.959] (==) Automatically enabling devices
[    23.959] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.959]     Entry deleted from font path.
[    23.959] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    23.959]     Entry deleted from font path.
[    23.959] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    23.959]     Entry deleted from font path.
[    23.959] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    23.959]     Entry deleted from font path.
[    23.959] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    23.959]     Entry deleted from font path.
[    23.959] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
[    23.959] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    23.959] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    23.959] (II) Loader magic: 0x81ffde0
[    23.959] (II) Module ABI versions:
[    23.959]     X.Org ANSI C Emulation: 0.4
[    23.959]     X.Org Video Driver: 10.0
[    23.959]     X.Org XInput driver : 12.3
[    23.959]     X.Org Server Extension : 5.0
[    23.960] (--) PCI:*(0:0:2:0) 8086:2e22:104d:9044 rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000ec00/8
[    23.960] (--) PCI: (0:0:2:1) 8086:2e23:104d:9044 rev 3, Mem @ 0xfe800000/1048576
[    23.960] (II) Open ACPI successful (/var/run/acpid.socket)
[    23.960] (II) LoadModule: "extmod"
[    23.989] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    23.990] (II) Module extmod: vendor="X.Org Foundation"
[    23.990]     compiled for 1.10.1, module version = 1.0.0
[    23.990]     Module class: X.Org Server Extension
[    23.990]     ABI class: X.Org Server Extension, version 5.0
[    23.990] (II) Loading extension MIT-SCREEN-SAVER
[    23.990] (II) Loading extension XFree86-VidModeExtension
[    23.990] (II) Loading extension XFree86-DGA
[    23.990] (II) Loading extension DPMS
[    23.990] (II) Loading extension XVideo
[    23.990] (II) Loading extension XVideo-MotionCompensation
[    23.990] (II) Loading extension X-Resource
[    23.990] (II) LoadModule: "dbe"
[    23.990] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    23.990] (II) Module dbe: vendor="X.Org Foundation"
[    23.990]     compiled for 1.10.1, module version = 1.0.0
[    23.990]     Module class: X.Org Server Extension
[    23.990]     ABI class: X.Org Server Extension, version 5.0
[    23.990] (II) Loading extension DOUBLE-BUFFER
[    23.990] (II) LoadModule: "glx"
[    23.990] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    23.990] (II) Module glx: vendor="X.Org Foundation"
[    23.990]     compiled for 1.10.1, module version = 1.0.0
[    23.990]     ABI class: X.Org Server Extension, version 5.0
[    23.990] (==) AIGLX enabled
[    23.990] (II) Loading extension GLX
[    23.990] (II) LoadModule: "record"
[    23.991] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    23.991] (II) Module record: vendor="X.Org Foundation"
[    23.991]     compiled for 1.10.1, module version = 1.13.0
[    23.991]     Module class: X.Org Server Extension
[    23.991]     ABI class: X.Org Server Extension, version 5.0
[    23.991] (II) Loading extension RECORD
[    23.991] (II) LoadModule: "dri"
[    23.991] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    23.991] (II) Module dri: vendor="X.Org Foundation"
[    23.991]     compiled for 1.10.1, module version = 1.0.0
[    23.991]     ABI class: X.Org Server Extension, version 5.0
[    23.991] (II) Loading extension XFree86-DRI
[    23.991] (II) LoadModule: "dri2"
[    23.991] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    23.991] (II) Module dri2: vendor="X.Org Foundation"
[    23.991]     compiled for 1.10.1, module version = 1.2.0
[    23.991]     ABI class: X.Org Server Extension, version 5.0
[    23.991] (II) Loading extension DRI2
[    23.991] (==) Matched intel as autoconfigured driver 0
[    23.991] (==) Matched vesa as autoconfigured driver 1
[    23.991] (==) Matched fbdev as autoconfigured driver 2
[    23.992] (==) Assigned the driver to the xf86ConfigLayout
[    23.992] (II) LoadModule: "intel"
[    23.992] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    23.992] (II) Module intel: vendor="X.Org Foundation"
[    23.992]     compiled for 1.10.1, module version = 2.14.0
[    23.992]     Module class: X.Org Video Driver
[    23.992]     ABI class: X.Org Video Driver, version 10.0
[    23.992] (II) LoadModule: "vesa"
[    23.992] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    23.992] (II) Module vesa: vendor="X.Org Foundation"
[    23.992]     compiled for 1.10.0, module version = 2.3.0
[    23.992]     Module class: X.Org Video Driver
[    23.992]     ABI class: X.Org Video Driver, version 10.0
[    23.993] (II) LoadModule: "fbdev"
[    23.993] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    23.993] (II) Module fbdev: vendor="X.Org Foundation"
[    23.993]     compiled for 1.10.0, module version = 0.4.2
[    23.993]     ABI class: X.Org Video Driver, version 10.0
[    23.993] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
    Sandybridge, Sandybridge
[    23.994] (II) VESA: driver for VESA chipsets: vesa
[    23.994] (II) FBDEV: driver for framebuffer: fbdev
[    23.994] (++) using VT number 7

[    23.995] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    23.995] (WW) Falling back to old probe method for vesa
[    23.995] (WW) Falling back to old probe method for fbdev
[    23.995] (II) Loading sub module "fbdevhw"
[    23.995] (II) LoadModule: "fbdevhw"
[    23.995] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    23.996] (II) Module fbdevhw: vendor="X.Org Foundation"
[    23.996]     compiled for 1.10.1, module version = 0.0.2
[    23.996]     ABI class: X.Org Video Driver, version 10.0
[    23.996] drmOpenDevice: node name is /dev/dri/card0
[    23.996] drmOpenDevice: open result is 9, (OK)
[    23.996] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    23.996] drmOpenDevice: node name is /dev/dri/card0
[    23.996] drmOpenDevice: open result is 9, (OK)
[    23.996] drmOpenByBusid: drmOpenMinor returns 9
[    23.996] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    23.996] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    23.996] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    23.996] (==) intel(0): RGB weight 888
[    23.996] (==) intel(0): Default visual is TrueColor
[    23.996] (II) intel(0): Integrated Graphics Chipset: Intel(R) G45/G43
[    23.996] (--) intel(0): Chipset: "G45/G43"
[    23.996] (**) intel(0): Relaxed fencing enabled
[    23.996] (**) intel(0): Tiling enabled
[    23.996] (**) intel(0): SwapBuffers wait enabled
[    23.996] (==) intel(0): video overlay key set to 0x101fe
[    24.086] (II) intel(0): Output VGA1 has no monitor section
[    24.166] (II) intel(0): Output LVDS1 has no monitor section
[    24.254] (II) intel(0): EDID for output VGA1
[    24.254] (II) intel(0): Printing probed modes for output VGA1
[    24.254] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    24.254] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    24.254] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    24.254] (II) intel(0): Modeline "848x480"x60.0   33.75  848 864 976 1088  480 486 494 517 +hsync +vsync (31.0 kHz)
[    24.254] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 489 492 525 -hsync -vsync (31.5 kHz)
[    24.334] (II) intel(0): EDID for output LVDS1
[    24.334] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[    24.334] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    24.334] (II) intel(0): Printing probed modes for output LVDS1
[    24.334] (II) intel(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 -hsync -vsync (75.0 kHz)
[    24.334] (II) intel(0): Modeline "1600x1024"x60.2  103.12  1600 1600 1656 1664  1024 1024 1029 1030 +hsync +vsync (62.0 kHz)
[    24.334] (II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
[    24.334] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    24.334] (II) intel(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
[    24.334] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    24.334] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
[    24.334] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz)
[    24.334] (II) intel(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz)
[    24.334] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    24.334] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    24.334] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    24.334] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    24.334] (II) intel(0): Output VGA1 connected
[    24.334] (II) intel(0): Output LVDS1 connected
[    24.334] (II) intel(0): Using fuzzy aspect match for initial modes
[    24.334] (II) intel(0): Output VGA1 using initial mode 1024x768
[    24.334] (II) intel(0): Output LVDS1 using initial mode 1024x768
[    24.334] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    24.334] (II) intel(0): Kernel page flipping support detected, enabling
[    24.334] (==) intel(0): DPI set to (96, 96)
[    24.334] (II) Loading sub module "fb"
[    24.334] (II) LoadModule: "fb"
[    24.335] (II) Loading /usr/lib/xorg/modules/libfb.so
[    24.335] (II) Module fb: vendor="X.Org Foundation"
[    24.335]     compiled for 1.10.1, module version = 1.0.0
[    24.335]     ABI class: X.Org ANSI C Emulation, version 0.4
[    24.335] (II) UnloadModule: "vesa"
[    24.335] (II) Unloading vesa
[    24.335] (II) UnloadModule: "fbdev"
[    24.335] (II) Unloading fbdev
[    24.335] (II) UnloadModule: "fbdevhw"
[    24.335] (II) Unloading fbdevhw
[    24.335] (==) Depth 24 pixmap format is 32 bpp
[    24.335] (==) intel(0): VideoRam: 262144 KB
[    24.335] (II) intel(0): [DRI2] Setup complete
[    24.335] (II) intel(0): [DRI2]   DRI driver: i965
[    24.335] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[    24.345] (II) UXA(0): Driver registered support for the following operations:
[    24.345] (II)         solid
[    24.345] (II)         copy
[    24.345] (II)         composite (RENDER acceleration)
[    24.345] (II)         put_image
[    24.345] (II)         get_image
[    24.345] (==) intel(0): Backing store disabled
[    24.345] (==) intel(0): Silken mouse enabled
[    24.345] (II) intel(0): Initializing HW Cursor
[    24.593] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    24.593] (==) intel(0): DPMS enabled
[    24.593] (==) intel(0): Intel XvMC decoder enabled
[    24.593] (II) intel(0): Set up textured video
[    24.593] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    24.593] (II) intel(0): direct rendering: DRI2 Enabled
[    24.593] (==) intel(0): hotplug detection: "enabled"
[    24.593] (--) RandR disabled
[    24.593] (II) Initializing built-in extension Generic Event Extension
[    24.593] (II) Initializing built-in extension SHAPE
[    24.593] (II) Initializing built-in extension MIT-SHM
[    24.593] (II) Initializing built-in extension XInputExtension
[    24.593] (II) Initializing built-in extension XTEST
[    24.593] (II) Initializing built-in extension BIG-REQUESTS
[    24.593] (II) Initializing built-in extension SYNC
[    24.593] (II) Initializing built-in extension XKEYBOARD
[    24.593] (II) Initializing built-in extension XC-MISC
[    24.593] (II) Initializing built-in extension SECURITY
[    24.593] (II) Initializing built-in extension XINERAMA
[    24.593] (II) Initializing built-in extension XFIXES
[    24.593] (II) Initializing built-in extension RENDER
[    24.593] (II) Initializing built-in extension RANDR
[    24.593] (II) Initializing built-in extension COMPOSITE
[    24.593] (II) Initializing built-in extension DAMAGE
[    24.593] (II) Initializing built-in extension GESTURE
[    24.603] (II) AIGLX: Trying DRI driver /usr/lib/dri/i965_dri.so
[    24.682] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    24.682] (II) AIGLX: enabled GLX_INTEL_swap_event
[    24.682] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    24.682] (II) AIGLX: enabled GLX_SGI_make_current_read
[    24.682] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    24.682] (II) AIGLX: Loaded and initialized i965
[    24.682] (II) GLX: Initialized DRI2 GL provider for screen 0
[    24.683] (II) intel(0): Setting screen physical size to 270 x 203
[    24.756] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[    24.770] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    24.770] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.770] (II) LoadModule: "evdev"
[    24.770] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.771] (II) Module evdev: vendor="X.Org Foundation"
[    24.771]     compiled for 1.10.0.902, module version = 2.6.0
[    24.771]     Module class: X.Org XInput Driver
[    24.771]     ABI class: X.Org XInput driver, version 12.3
[    24.771] (II) Using input driver 'evdev' for 'Power Button'
[    24.771] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.771] (**) Power Button: always reports core events
[    24.771] (**) Power Button: Device: "/dev/input/event1"
[    24.784] (--) Power Button: Found keys
[    24.784] (II) Power Button: Configuring as keyboard
[    24.784] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    24.784] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    24.784] (**) Option "xkb_rules" "evdev"
[    24.784] (**) Option "xkb_model" "jp106"
[    24.784] (**) Option "xkb_layout" "jp"
[    24.786] (II) XKB: reuse xkmfile /var/lib/xkb/server-A94739771F15EFE8C025256FFCF9484D873832F7.xkm
[    24.787] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event6)
[    24.787] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[    24.787] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
[    24.787] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.787] (**) Sony Vaio Keys: always reports core events
[    24.787] (**) Sony Vaio Keys: Device: "/dev/input/event6"
[    24.804] (--) Sony Vaio Keys: Found keys
[    24.804] (II) Sony Vaio Keys: Configuring as keyboard
[    24.804] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/SNY5001:00/input/input6/event6"
[    24.804] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD)
[    24.804] (**) Option "xkb_rules" "evdev"
[    24.804] (**) Option "xkb_model" "jp106"
[    24.804] (**) Option "xkb_layout" "jp"
[    24.806] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    24.806] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.806] (II) Using input driver 'evdev' for 'Power Button'
[    24.806] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.806] (**) Power Button: always reports core events
[    24.806] (**) Power Button: Device: "/dev/input/event0"
[    24.816] (--) Power Button: Found keys
[    24.816] (II) Power Button: Configuring as keyboard
[    24.816] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    24.816] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    24.816] (**) Option "xkb_rules" "evdev"
[    24.816] (**) Option "xkb_model" "jp106"
[    24.816] (**) Option "xkb_layout" "jp"
[    24.819] (II) config/udev: Adding input device UVC Camera (05ca:183d) (/dev/input/event5)
[    24.819] (**) UVC Camera (05ca:183d): Applying InputClass "evdev keyboard catchall"
[    24.819] (II) Using input driver 'evdev' for 'UVC Camera (05ca:183d)'
[    24.819] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.819] (**) UVC Camera (05ca:183d): always reports core events
[    24.819] (**) UVC Camera (05ca:183d): Device: "/dev/input/event5"
[    24.832] (--) UVC Camera (05ca:183d): Found keys
[    24.832] (II) UVC Camera (05ca:183d): Configuring as keyboard
[    24.832] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input5/event5"
[    24.832] (II) XINPUT: Adding extended input device "UVC Camera (05ca:183d)" (type: KEYBOARD)
[    24.832] (**) Option "xkb_rules" "evdev"
[    24.832] (**) Option "xkb_model" "jp106"
[    24.832] (**) Option "xkb_layout" "jp"
[    24.833] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event8)
[    24.833] (II) No input driver/identifier specified (ignoring)
[    24.834] (II) config/udev: Adding input device Innovace USB Keyboard (/dev/input/event2)
[    24.834] (**) Innovace USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    24.834] (II) Using input driver 'evdev' for 'Innovace USB Keyboard'
[    24.834] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.834] (**) Innovace USB Keyboard: always reports core events
[    24.835] (**) Innovace USB Keyboard: Device: "/dev/input/event2"
[    24.852] (--) Innovace USB Keyboard: Found keys
[    24.852] (II) Innovace USB Keyboard: Configuring as keyboard
[    24.852] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input2/event2"
[    24.852] (II) XINPUT: Adding extended input device "Innovace USB Keyboard" (type: KEYBOARD)
[    24.852] (**) Option "xkb_rules" "evdev"
[    24.852] (**) Option "xkb_model" "jp106"
[    24.852] (**) Option "xkb_layout" "jp"
[    24.853] (II) config/udev: Adding input device Innovace USB Keyboard (/dev/input/event3)
[    24.853] (**) Innovace USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    24.853] (II) Using input driver 'evdev' for 'Innovace USB Keyboard'
[    24.853] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.853] (**) Innovace USB Keyboard: always reports core events
[    24.853] (**) Innovace USB Keyboard: Device: "/dev/input/event3"
[    24.868] (--) Innovace USB Keyboard: Found 9 mouse buttons
[    24.868] (--) Innovace USB Keyboard: Found scroll wheel(s)
[    24.868] (--) Innovace USB Keyboard: Found relative axes
[    24.868] (--) Innovace USB Keyboard: Found absolute axes
[    24.868] (II) evdev-grail: failed to open grail, no gesture support
[    24.868] (--) Innovace USB Keyboard: Found keys
[    24.868] (II) Innovace USB Keyboard: Configuring as mouse
[    24.868] (II) Innovace USB Keyboard: Configuring as keyboard
[    24.868] (II) Innovace USB Keyboard: Adding scrollwheel support
[    24.868] (**) Innovace USB Keyboard: YAxisMapping: buttons 4 and 5
[    24.868] (**) Innovace USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.868] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input3/event3"
[    24.868] (II) XINPUT: Adding extended input device "Innovace USB Keyboard" (type: KEYBOARD)
[    24.868] (**) Option "xkb_rules" "evdev"
[    24.868] (**) Option "xkb_model" "jp106"
[    24.868] (**) Option "xkb_layout" "jp"
[    24.868] (EE) Innovace USB Keyboard: failed to initialize for relative axes.
[    24.868] (II) Innovace USB Keyboard: initialized for absolute axes.
[    24.868] (**) Innovace USB Keyboard: (accel) keeping acceleration scheme 1
[    24.868] (**) Innovace USB Keyboard: (accel) acceleration profile 0
[    24.868] (**) Innovace USB Keyboard: (accel) acceleration factor: 2.000
[    24.868] (**) Innovace USB Keyboard: (accel) acceleration threshold: 4
[    24.869] (II) config/udev: Adding input device OPM-U06 (/dev/input/event4)
[    24.869] (**) OPM-U06: Applying InputClass "evdev pointer catchall"
[    24.869] (II) Using input driver 'evdev' for 'OPM-U06'
[    24.869] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.869] (**) OPM-U06: always reports core events
[    24.869] (**) OPM-U06: Device: "/dev/input/event4"
[    24.876] (--) OPM-U06: Found 9 mouse buttons
[    24.876] (--) OPM-U06: Found scroll wheel(s)
[    24.876] (--) OPM-U06: Found relative axes
[    24.876] (--) OPM-U06: Found x and y relative axes
[    24.876] (II) OPM-U06: Configuring as mouse
[    24.876] (II) OPM-U06: Adding scrollwheel support
[    24.876] (**) OPM-U06: YAxisMapping: buttons 4 and 5
[    24.876] (**) OPM-U06: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.876] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input4/event4"
[    24.876] (II) XINPUT: Adding extended input device "OPM-U06" (type: MOUSE)
[    24.876] (II) OPM-U06: initialized for relative axes.
[    24.876] (**) OPM-U06: (accel) keeping acceleration scheme 1
[    24.876] (**) OPM-U06: (accel) acceleration profile 0
[    24.876] (**) OPM-U06: (accel) acceleration factor: 2.000
[    24.876] (**) OPM-U06: (accel) acceleration threshold: 4
[    24.876] (II) config/udev: Adding input device OPM-U06 (/dev/input/mouse0)
[    24.876] (II) No input driver/identifier specified (ignoring)
[    24.884] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event7)
[    24.884] (II) No input driver/identifier specified (ignoring)
[    24.884] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse1)
[    24.884] (II) No input driver/identifier specified (ignoring)
[    72.700] (II) intel(0): Allocated new frame buffer 1600x1200 stride 6656, tiled

ちなみにxrog.confはありませんでした。
あと、すみません。マニュアル等は、
新しいPCを買ったときに、古いPC(ubuntu導入したやつ)の方はほぼ使わなくなって
捨ててしまいました。
かなり長くなってしまいました。申し訳ないです。

オフライン

 

#8 2011-08-15 14:46:35

gkt
新しいメンバ
登録日: 2011-08-14

Re: 画像がディスプレイ全体に表示されません

追記
端子の話ですが
試しにLVDS1の方を
xrandr --output LVDS1 --off
にしてみたところ
今表示されてる画面が真っ黒になり、なにも表示されなくなりました
もう、二つの端子が何がどうなってるのか良く分からなくなってしまいました。

オフライン

 

#9 2011-08-15 17:32:41

hmatsue
アドバイザ
登録日: 2009-03-10

Re: 画像がディスプレイ全体に表示されません

不思議ですね。ログを見る限りではやはりVGA1と、LVDS1にモニタがつながっていて、EDIDで解像度が検出されているように見えますが。。
ネットワークに他のPCがいるとかは影響することは無く、なにかドライバの動きがおかしいように思えます。

xrandrで解像度変更はできるようになったのでしょうか。
xrandrの解像度変更でとりあえず、目的が達成できるようであれば、それで事足りるかと思います。

もし、何か不都合があり、別の設定方法を試してみたいという場合は、EDIDで検出した解像度がまったくあてにできないっぽいので、xorg.confの作成を試すのが良いかと思います。

1. なにか変更した箇所があれば戻す(gdmの設定ファイルを変更されていますか?)。
2. xorg.confの作成

コード:

gksudo gedit /etc/X11/xorg.conf

で/etc/X11/xorg.confを開き内容を下記とする。

コード:

Section "Device"
        Identifier      "Configured Device"
        Driver          "intel"
        Option          "monitor-LVDS" "Configured Monitor"
EndSection

Section "Monitor"
        Identifier      "Configured Monitor"
        Modeline        "1680x1050_60.00"  147.14  1680 1784 1968 2256  1050 1051 1054 1087  -HSync +Vsync+Vsync
        Option          "PreferredMode" "1680x1050_60.00"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "Configured Device"
        Monitor         "Configured Monitor"
        DefaultDepth    24
        SubSection "Display"
                Depth   24
                Modes   "1680x1050" "1024x768" "800x600"
        EndSubSection
EndSection

3. 再起動

オフライン

 

#10 2011-08-16 01:14:56

gkt
新しいメンバ
登録日: 2011-08-14

Re: 画像がディスプレイ全体に表示されません

返事ありがとうございます。
今違うPCでINしているので、ubuntuのほうでINし次第
xorg.confでやってみます。

xrandrで一応解像度の変更ができて
問題の解消も多少出来ていますが
やはりなにかおかしいのです。
それがubuntuの仕様なのかはわかりませんが
今1600x1200で間に合わせているのですが
たとえばウェブブラウザを全画面表示で開くときに、
画面の一番下までスクロールしたときに
ブラウザの枠がモニタの外にはみ出てる感じで
一番下の部分が見えなくなります。
試しに1600x1024にしてみたのですが
推奨解像度が1680x1050のせいか
右側の部分(足りてない1680-1600=80くらいの部分)だけでなく
下の部分(足りてない1050-1024=26くらいの部分)
が、何も表示されない状態(無の部分)になり
それで、全画面表示にしてみましたが
やはり、「無」の部分にはみ出す形で
一番下までスクロールすると
一番下の部分が見えなくなるんです。
これもどうにか改善できませんでしょうか?

オフライン

 

Board footer

Powered by FluxBB